TREATMENT OF SORBIC ACID MANUFACTURING WASTEWATER BY HYPERCROSSLINKED POLYMERIC ADSORBENT (NDA-150)

1. INTRODUCTION The chemical name of sorbic acid is 2,4-hexadienoic acid. Toxicity of sorbic acid is less than any other preservative, which is internationally acknowledged. Sorbic acid can participate in mans metabolism and can be easily oxidized, then …     

Preconcentration and Determination of Trace Palladium with 1, 5-Diphenylcarbazone- Naphthalene as Adsorbent by Atomic Absorption Spectrometry

ABSTRACT|A highly selective, sensitive, rapid and simple atomic absorption spectrometric method has been developed for the determination of trace amounts of palladium in synthetic and real samples. Palladium can be adsorbed on naphthalene-1, 5-diphenyl-carbazone (DPCO) as adsorbent from the large volume of its aqueous solutions in the pH range 2.0 to 0. After filtration, the metal ion was desorbed with 5ml of 0.25M thiourea solution, and determined by AAS.

Alternatively, palladium can be adsorbed on this adsorbent packed in a column and determined similarly. The detection limit is 0.5 μg (signal to noise ratio=2) and the linearity is maintained in concentration range of 1.5-50μg of Pd with a correlation coefficient of 0.9992. Seven replicate determinations on samples containing 2.5 and 20μg of palladium gave the relative standard deviations of 3.6% and 0.81%, respectively. Various parameters such as effect of pH, volume of aqueous phase, shaking time and interference of number of ions on the determination of Pd have been studied in detail to optimize the conditions for its estimation in various synthetic and real samples.     

Sample and Sorbent Integrity During Combustion Source Sampling

Abstract

A research program was initiated to evaluate the stability of selected organic compounds collected on porous polymer sorbents during combustion source sampling. This type of study is necessary to determine if destruction and removal of hazardous materials waste has occurred during incineration and not as a result of the sampling and analytical approach used. Two compounds, hexachlorobenzene and toluene diisocyanate, were selected for study. Due to difficulties encountered in preliminary work, studies on toluene diisocyanate were discontinued. Hexachlorobenzene sorbed onto XAD-2 resin at the 1 μg level was exposed to the following conditions intended to simulate hazardous waste incineration stack samplin: moist air, moist air in combination with HCl (two concentrations), and warm air. Recoveries following exposure were determined for each of three trials. The results indicate that hexachlorobenzene sorbed onto XAD-2 is stable with respect to the conditions routinely encountered during incineration stack sampling.     

Adsorption and desorption characteristics of barium oxide at high temperature

Oxygen-selective adsorbents were prepared by two different methods, hydrothermal and sol-gel methods. The adsorption and desorption characteristics of these adsorbents were compared in terms of stability and sorption capacity. The sorbents prepared by the sol-gel method showed better cyclic stability and higher adsorption capacity than that prepared by the hydrothermal method because the sol-gel method entrapped well the barium peroxide.Relaxation time for adsorption ranged from 4 to 9 min depending on the preparation methods and that for desorption was 6 min regardless of the preparation methods. Breakthrough experiment with the sorbent prepared by the sol-gel method was performed. The adsorption breakthrough curves at 600 °C showed two plateau regions. One was at about 3.5%, and the other was 20%. The first plateau region is related to the sharp transition point of the oxygen adsorption isotherm. Though the relaxation time for adsorption was 6 min, the time required from the end of the first plateau to the beginning of the second plateau was just 2 min. During the desorption, a plateau region at 3.5% of oxygen concentration was observed regardless of the desorption flow rate.     

纤维素基磁性聚偕胺肟树脂的研究——循环吸溴中吸附与还原能力的变化

研究了酸式纤维素基磁性聚偕胺肟树脂（ＡＭＡＯ）在循环吸溴过程中吸附容量和还原能力的变化，发现原树脂的吸溴初速和溴的还原率比再生树脂高一倍以上，但第一次和第二次再生树脂的吸附速度和还原效率几乎相同，暗示着树脂吸溴后基本结构已发生了彻底的变化．树脂在循环使用时吸溴容量变化不大而溴的还原量却显著降低，表明ＡＭＡＯ作为吸溴剂有较高的实用价值．     

Ammonium tetraphenylborate-naphthalene adsorbent for the preconcentration and trace determination of uranium in standard alloys and synthetic samples using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol by fourth-derivative spectrophotometry

A solid ion-pair material produced from ammonium tetraphenylborate (ATPB) and naphthalene has been used for the preconcentration of uranium from the large volume of its aqueous complex samples. Uranium reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) to form a water insoluble, coloured complex. This complex is quantitatively retained on the ATPB-naphthalene adsorbent filled in a column in the pH range 7.0–9.5 and at a flow rate of 2 ml/min. The solid mass from the column is dissolved with 5 ml of dimethylformamide (DMF) and uranium is determined by fourth-derivative spectrophotometry. The calibration curve is linear over the concentration range of 0.13–15.0 g of uranium in 5 ml of the final DMF solution. Seven replicate determinations of 6 g of uranium gave a mean peak height (peak-to-peak signal between 592 nm and 582 nm) of 1.02 with a relative standard deviation of 0.95%. The sensitivity is 0.8419 (d⁴A/d⁴)/(g ml^–1) found from the slope of the calibration curve. The interference of a large number of anions and cations on the estimation of uranium has been studied and the method applied for the determination of uranium in coal fly ash, Zr-base alloy and some synthetic samples corresponding to standard alloys.     

NAK-12树脂脱除蚕蛹复合氨基酸异味及褐变物质的研究

本文研究了用NAK－12吸附树脂脱除蚕蛹复合氨基酸异味及褐变色素的条件，初步分析了蚕蛹复合氨基酸异味产生的原因，实验结果表明：当流速为3BV／h时，1ml NAK-12吸附树脂能吸附1．75g蚕蛹复合氨基酸中的异味物质；能吸附1．45g蚕蛹复合氨基酸中的褐变物质。甲醇是异味物质和褐变物质的良好洗脱剂，用pH1．0的甲醇以1BV／h流速洗脱，仅用3．5BV的洗脱剂即可完全洗脱异味物质和褐变物质，蚕蛹复合氨基酸异味产生的可能机理是：加热蚕蛹复合氨基酸液时，其苯丙氨酸，蛋氨酸，蛋氨酸，异亮氨酸，亮氨酸，苏氨酸被氧化脱氨，生成挥发性醛，而其褐变则是赖氨酸，精氨酸与还原糖发生Maillard反应生成褐变物质引起的。     

SINGLE AND BINARY ADSORPTION PERFORMANCE OF SALICYLIC ACID AND 5-SULFOSALICYLIC ACID ONTO HYPERCROSSLINKED POLYMERIC ADSORBENTS

Single and binary adsorption behaviors of salicylic acid and 5-sulfosalicylic acid onto hypercrosslinked polymeric adsorbents, i.e. NDA-101 and NDA-99 were investigated. The Freundlich model can successfully describe all the adsorption isotherms tested, which indicates a favorable and exothermic adsorption process. The adsorption of salicylic acid relies on π-π interaction, while the electrostatic interaction further influences the adsorption of 5-sulfosalicylic acid onto NDA-99. The adsorptive capacity of salicylic acid on NDA-99 decreases but increases on NDA-101 with 5-sulfosalicylic acid as the background component in a binary solute system. The amount of 5-sulfosalicylic acid adsorbed was decreased with the increase in initial concentration of salicylic acid on both adsorbents. The competition for the adsorption sites is considered to be predominant in the solid-to-liquid interaction process. The adsorption selectivity of salicylic acid onto NDA-101 is higher than onto NDA-99 by more than an order of magnitude. Thus, combination technique involving NDA-101 followed by NDA-99 can be effectively applied to separate and recover salicylic acid and 5-sulfosalicylic acid from wastewater.     

酚醛型吸附树脂对咖啡因吸附性能的研究

利用 3种自制吸附树脂JDW 1、JDW 2、JDW 3和DuoliteS 761对咖啡因进行了静态和动态吸附研究 .结果发现 3种自制树脂对咖啡因的吸附性能明显优于DuoliteS 761 ;在吸附咖啡因的初始阶段 ,即达到 3 2 %～5 1 %平衡吸附百分率时 ,吸附速率数据和半经验速率方程很吻合 ,证实吸附咖啡因是粒扩散控制过程 ;酚醛型吸附树脂等温吸附咖啡因的平衡吸附数据符合Langmuir方程 ,相关系数在 0 99以上 ,因此 ,酚醛型吸附树脂吸附咖啡因属单分子层吸附 ;用 1mol LHCl和 40 %的甲醇溶液复合使用 ,效果很好