用于荧光光谱测定的微量固体粉末样品制样优化*

为满足微量固体粉末荧光检测要求,采用薄层制样法,改变黏结剂种类、黏结剂的用量、涂层厚度以及后处理方法来进行其制样工艺优化。 结果表明:以聚乙烯醇做黏结剂、1∶5的固液比、在50 ℃烘干30 min、涂片次数3层的薄层制样优化工艺可满足荧光固体测样的要求。采用t检验比较固体样品池装样和薄层制样法的荧光检测结果发现两者无显著性差异,薄层制样优化工艺的需样量较样品池减少90%。     

Iso-structural phase transition in tetramethylammonium nickel（Ⅱ） nitrite [（CH3）4N][Ni（NO2）3]

The title compound, tetramethylammonium nickel nitrite [（CH3）4N][Ni（NO2）3], has a hexagonal perovskite-type structure with formula ABX3. It undergoes two reversible phase transitions occurring at about 409.1 and 428.4 K, associated with dielectric transitions. DSC measurement and dielectric measurement confirm the transition. The variable-temperature X-ray structural determinations and the powder X-ray diffraction （PXRD） experiments reveal that this compound has the same space group P3ml （No. 164） at 293 K, 413 K and 438 K. The phase transitions are caused by the rotation of the [（CH3）4N]＋ cation.     

Alkali metal cation doping of metal-organic framework for enhancing carbon dioxide adsorption capacity

Metal-organic frameworks （MOFs） have attracted much attention as adsorbents for the separation of CO2 from flue gas or natural gas. Here, a typical metal-organic framework HKUST-I（also named Cu-BTC or MOF-199） was chemically reduced by doping it with alkali metals （Li, Na and K） and they were further used to investigate their CO2 adsorption capacities. The structural information, surface chemistry and thermal behavior of the prepared adsorbent samples were characterized by X-ray powder diffraction （XRD）, thermo-gravimetric analysis （TGA） and nitrogen adsorption-desorption isotherm analysis. The results showed that the CO2 storage capacity of HKUST-1 doped with moderate quantities of Li＋, Na＋ and K＋, individually, was greater than that of unmodified HKUST-1. The highest CO2 adsorption uptake of 8.64 mmol/g was obtained with 1K-HKUST-1, and it was ca. 11% increase in adsorption capacity at 298 K and 18 bar as compared with HKUST- 1. Moreover, adsorption tests showed that HKUST-1 and 1K-HKUST-1 displayed much higher adsorption capacities of CO2 than those of N2. Finally, the adsorption/desorption cycle experiment revealed that the adsorption performance of 1K-HKUST-1 was fairly stable, without obvious deterioration in the adsorption capacity of CO2 after 10 cycles.     

较为宽松条件下水热合成铁酸铋粉体

Bismuth ferrite(BiFeO₃) powders were hydrothermally synthesized by using FeCl₃·6H₂O and BiCl₃ as staring materials, NaOH as a mineralizer and NH₄Cl as an additive. The results show that pure BiFeO₃ powders can be synthesized under loose hydrothermal conditions of reaction temperature ranging from 140 to 230 ℃ and NaOH concentration ranging from 2 mol·L^-1 to 5 mol·L^-1. Moreover, the morphologies of the products can be controlled by changing the hydrothermal conditions.     

比重瓶法测定管道防腐用环氧粉末密度的不确定度评估

对GB 4472-1984 比重瓶法测定管道防腐用环氧粉末密度测量结果的影响因素进行了分析,并依据JJF1059-1999对比重瓶法测量环氧粉末密度的不确定度进行了评估,当环氧粉末密度为. 1. 595 g/cm3时,测量结果的扩展不确定度为0. 026 g/cm3,k=2.     

粉末注射成形坯孔隙度的分形模型

粉末注射成形坯是一种具有分形特性的典型的多孔介质,借助于多孔介质孔隙结构的分形理论,对粉末注射成形坯孔隙率的分形模型进行推导。首先分析了粉末注射成形坯孔隙结构的双重分形特性,介绍了粉末注射成形坯孔隙分布分形维数和孔隙迂曲分形维数,然后推导出粉末注射成形坯孔隙度的分形模型。     

I~-的光电化学氧化与光助充电二次锂离子电池

采用扫描电子显微镜、X射线衍射和粉末微电极分别考察了TiO2粉末的形貌、结构以及氧化I-的光电化学行为.结果表明,TiO2粉末晶型为锐钛矿,粒径在100～200 nm范围内.在光照条件下,在TiO2半导体电极上电化学氧化I-生成I2的超电势数值降低约1 V.以TiO2/ITO和Li4Ti5O12分别作为正负极,电解液为碳酸丙烯酯(PC)+LiClO4+LiI,并以聚偏氟乙烯(PVDF)作为隔膜构成分隔式电解池,进行整体电解并结合紫外-可见光谱进行分析.结果表明,该装置在光照条件下电池充电电压比非光照条件下的充电电压降低约0.9 V,且充电效率接近100%.该光电化学装置是一种可以利用光能充电的二次锂离子电池.     

选择性激光烧结高分子粉末的制备方法

综述了用于选择性激光烧结(SLS)的高分子粉末的制备方法。首先介绍了选择性激光烧结工艺对粉末在粒径、形貌、粒径分布、流动性等方面的性能要求,然后综述了常用的高分子粉末的制备方法包括机械粉碎法、直接聚合法、溶液法,以及一些较为新颖的粉末制备方法,如相分离法、微流体技术、"溶胀"粉碎法、水分散法,并对不同种类的高分子粉末的应用作了介绍。