Immobilization of Glucose Oxidase on Cellulose／Cellulose Acetate Membrane and its Detection by Scanning Electrochemical Microscope （SECM）

Cellulose/cellulose acetate membranes were prepared and functionalized by introducingamino group on it, and then immobilized the glucose oxidase (Gox) on the functionalizd membrane.SECM was applied for the detection of enzyme activity immobilized on the membrane.Immobilized biomolecules on such membranes was combined with analysis apparatus and can beused in bioassays.     

吡嗪衍生物在石墨表面上的自组装单层膜结构

利用扫描隧道显微镜研究了荧光液晶分子2, 5-二-[2-(3, 4-二-十二烷氧基-苯基)-乙烯基]-3, 6-二甲基吡嗪(BPDP12)在石墨表面上自组装单层膜的结构. 实验结果表明, 该化合物在石墨表面形成两种自组装结构：一种是稳定的, 分子的共轭中心相互平行, 烷基链相互交错的密排结构；另一种是不稳定的, 分子的共轭中心彼此为烷基链所分隔的非密排结构. 分子之间较强的π-π作用和分子烷基链之间的范德华作用力对分子组装的取向形成竞争, 是产生两种不同组装结构的根本原因.     

AN ATOMIC FORCE MICROSCOPY STUDY ON THE AGGREGATION OF ISOTACTIC POLY（METHYL METHACRYLATE）

Aggregation process of isotactic poly(methyl methacrylate) (i-PMMA) has been studied extensively for many years, and considerable progress has been made in both experimental and theoretical studies. They are, however, seldom sustained by real-space observations of the underlying morphology. In this paper, the aggregation process of i-PMMA in concentrated acetone solutions and the fractal structure of the resulting three-dimensional clusters were characterized on the basis of real-space AFM observations of their two-dimensional projection. It was found that spherical multiple-chain particles formed upon collapse and aggregation of the involving chains as a whole during quenching the solution to room temperature. By keeping the solution at room temperature, the initially formed particles stick together upon contact to form larger particles through reassembling very slowly. The succeeding collision of the enlarged spherical particles leads to the formation of small clusters. These newly formed small clusters grow when they meet with other clusters or single Brownian particles. This leads to the formation of large clusters with fractal dimension of 1.95$±0.05, which suggest a reaction-limited cluster aggregation of i-PMMA in a concentrated acetone solution. This is in accordance with the conclusion obtained by light scattering measurements.     

胶束增敏导数—可变角同步荧光法同时测定两种羟基联苯

本文建立了２，２’－二羟基联苯（ＤＨＰ）和４－羟基联苯（ＨＰ）的胶束增敏导数－可变角同步荧光同时分析方法，可变角同步扫描所得到的ＤＨＰ和ＨＰ的谱峰位置均对应于常规光谱中的最佳激发－发射位置，经二阶求导后，消除分析谱带干扰，所得的二阶导数－可变角同步光谱即可用于两物质的同时测定，方法快速灵敏，ＤＨＰ测定范围为０．０５～０．５ｍｇ／Ｌ，ＨＰ测定范围为０．０７～２ｍｇ／Ｌ。     

TiO2/PtO-Pt复合膜和SnO2/PtO-Pt复合膜氢敏性能的研究

将PtO-Pt纳米粒子膜与TiO2，SnO2纳米粒子膜复合，利用PtO-Pt纳米粒子膜作 为插入电极和催化剂，设计并研制出一类新型双层结构复合膜气体传感器。采用 TEM和SEM对薄膜的显微结构进行了表征，对空气中4.0H2的氢敏性能研究表明： 200℃时，TiO2/PtO-Pt复合膜对氢气的灵敏度为70％，而TiO2纳米粒子膜无响应。 100℃时，SnO2/PtO-Pt复合膜的灵敏度为92％，同样条件下，SnO2纳米粒子膜的灵 敏度仅为4％。说明PtO-Pt纳米粒子膜的催化作用能够显著提高TiO2和SnO2的膜氢 敏性能。另外，TiO2/PtO-Pt复合膜和SnO2/PtO-Pt复合膜均对空气中H2有很高的选 择性。     

长链烷基胺氢卤酸盐的热致相变

差示扫描量热法（ＤＳＣ）结果表明，烷基胺氢卤酸盐化合物的相变温度与化合物烷基链链长之间存在明显的规律性，固－固结构相变的主相变峰温随烷基链链长的递增而升高，其逆相变过程表现出明显的热滞后现象；而熔融相变温度则随烷基链链长的递增而降低；实验结果还表明，试样的陈化放置过程以及结晶过程中所用的溶剂对化合物的热致相变历程都有明显的影响。     

四苯基卟啉铜分子的扫描隧道显微镜成像

本文首次以ＬＢ技术将四苯基卟啉铜（ＣｕＴＰＰ）分子沉积到高定向热解石墨上，并用ＳＴＭ研究其表面形貌，得到了原子级分辨的ＣｕＴＰＰ分子的表面形貌图，结果表明，ＣｕＴＰＰ分子具有近似圆状平面结构，分子直径为１．０ｎｍ，与理论结果十分吻合，结合ＳＴＭ原理，讨论了有机大分子ＳＴＭ成像的条件。     

电子显微技术应用于生物纳米材料表征与测试的研究进展

该文简述了电子显微技术的发展历程,并介绍了现代电子显微镜的新功能。针对生物纳米材料理化性能与功能应用的特殊性,结合研究实例,重点阐述运用电子显微结构表征与原位分析测试技术指导构建新颖纳米结构、揭示材料与细胞/组织相互作用并发挥功能的机制。并在此基础上,展望了电子显微技术在生物纳米材料研究领域的发展方向(大尺寸图像拼接、三维重构、动态原位实时成像)。     

预处理条件对Ni-Ce-P非晶态合金液相加氢活性的影响

采用真空骤冷技术制备了Ni82Ce0.31P17.7和Ni82P18非晶态合金。通过高压氢气中热处理, 使其粉化。DSC研究结果表明加入少量Ce使Ni-P非晶态合金晶化温度提高160℃。用高压反应釜考察了氧化温度和氢还原温度对Ni-De-P非晶态合金本乙烯液相加氢活性的影响, 并对比了Ni-P和Ni-Ce-P的加氢活性, 活性测试的结果表明: 氧化、还原处理过程使Ni-Ce-P加氢活性显著增加, 最佳的预处理条件是240℃氧化1h, 300℃氢气还原2h; Ni-Ce-P加氢活性是Ni-P加氢活性的3-4倍, 用AES和XPS研究了氧化、还原过程中,Ni-Ce-P表面性质的变化。     

Chemical Liquid Phase Deposition of Thin Aluminum Oxide Films

Introduction Inorganic oxide films have attracted a lot of interest in the last several decades. Among them, silicon dioxide films are widely used in modern microelectronics, optics and mechanics. This material has been grown by various methods including thermal oxidation, chemical vapor phase deposition, plasma-enhanced chemical vapor phase deposition, and so on.1,2 Recently, Nagayama et al.3 have reported that SiO2 thin films could be produced by a new chemical method of liquid phase depos…