流动注射化学发光法测定工业废水中苯酚

采用流动注射技术,研究了高锰酸钾-过氧化氢-苯酚的化学发光行为,对影响化学发光强度的因素进行了试验,建立了流动注射化学发光法测定苯酚的方法。方法的检出限为3×10-5g.L-1,线性范围为1.0×10-4~1.0×10-1g.L,对浓度为4.0×10-4g.L的苯酚作试验,求得其相对标准偏差(n=11)值为1.6%。方法用于废水中苯酚含量的测定,结果与分光光度法测得值一致。     

低温加氢催化剂的设计: 理论与实践

简要总结了我们在C=C及C=O双键低温加氢双金属催化剂方面的最新研究成果. 首先, 我们以环己烯加氢为探针反应, 证明了平行使用多种研究手段的重要性, 包括单晶表面的基础研究与DFT计算, 多晶表面的合成与表征, 负载型催化剂的制备与性能测试等. 其次, 总结了双金属催化剂在其他加氢反应, 如丙烯醛C=O双键的选择性加氢, 苯的低温加氢, 以及乙炔的选择性加氢等反应中的应用. 最后, 讨论了利用金属碳化物代替贵金属Pt以减少双金属催化剂中Pt用量的可能性.     

Ni-Cu和TiO2-SiO2间的相互作用及其对催化性能的影响

用表面反应改性法制备了ＴｉＯ２－ＳｉＯ２（ＴＳＯ）表面复合物载休，用ＴＰＲ，ＩＲ，ＴＰＤ－ＭＳ和ＴＰＳＲ－ＭＳ等技术研究了Ｎｉ－Ｃｕ／ＴＳＯ间的相互作用及其对ＣＯ加氢反应的催化性能。结果表明，ＮｉＯ－ＣｕＯ与ＴＳＯ间的相互作用导致ＣｕＯ的还原温度降低和ＮｉＯ的还原温度升高，并有少量表面物种生成；还原后的Ｎｉ－Ｃｕ／ＴＳＯ催化剂表面上存在着两类活性中心，即合金相中的Ｎｉ及载体相中的Ｔｉ＾ｎ＋（或Ｔｉ     

低温加氢催化剂的设计: 理论与实践

简要总结了我们在C=C及C=O双键低温加氢双金属催化剂方面的最新研究成果. 首先, 我们以环己烯加氢为探针反应, 证明了平行使用多种研究手段的重要性, 包括单晶表面的基础研究与DFT计算, 多晶表面的合成与表征, 负载型催化剂的制备与性能测试等. 其次, 总结了双金属催化剂在其他加氢反应, 如丙烯醛C=O双键的选择性加氢, 苯的低温加氢, 以及乙炔的选择性加氢等反应中的应用. 最后, 讨论了利用金属碳化物代替贵金属Pt以减少双金属催化剂中Pt用量的可能性.     

锌,锰对K—Fe／ZSM—48CO加氢催化反应性能的影响

锌、锰对ＫＦｅ／ＺＳＭ４８ＣＯ加氢催化反应性能的影响范彬彬马静红樊卫斌李瑞丰曹景慧（太原工业大学精细化工研究所，太原０３００２４）关键词ＣＯ加氢，ＺＳＭ４８，助剂效应ＫＦｅ／ＺＳＭ４８在一氧化碳加氢合成低碳烯烃的反应中表现出良好的性能。沸石载体不仅...     

以环己胺为模板剂的ZSM－35分子筛的合成及其催化性能

 采用环己胺为有机模板剂成功地合成出ZSM－35分子筛．反应釜的转速对ZSM－35的晶化过程有明显的影响．NH3－TPD结果显示ZSM－35的酸性分布与ZSM－5分子筛类似，但ZSM－35具有强于ZSM－5的酸性中心．酸碱浸泡试验及热分析结果表明ZSM－35具有良好的耐酸碱性和热稳定性．在连续流动的固定床反应装置上，将担载少量镍的ZSM－35分子筛催化剂用于催化裂化汽油的加氢异构化反应，结果表明，Ni／ZSM－35催化剂可降低汽油中的烯烃含量，增加异构烷烃和芳烃的含量，从而提高汽油的质量．     

膦化聚2,6—二甲基1,4—苯醚负载钯催化剂的表征及其催化性能

报道了四种不同P/Pd摩尔比的膦化聚2,6-二甲基1,4-苯醚负载把催化剂的加氢和异构化性能;通过XPS、电镜和远红外对催化剂进行了表征;并考察了溶剂和温度对催化剂活性的影响.     

苯炔与硝酮[3+2]环加成制备二取代苯并异噁唑烷

采用[3 2]1,3-偶极环加成反应,苯炔前体邻-三甲硅基苯酚三氟甲磺酸酯在氟化铯的作用下与硝酮反应合成了9个2,3-二取代苯并[d]异噁唑烷,收率87%～97%。其结构经1H NMR,13C NMR和高分辨率MS确证。     

探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

高分子钯络合物催化的亚胺化合物的加氢反应

制备了一系列以二氧化硅为载体的侧链上含有各种氮配位基团的聚硅氧烷-钯络合物,这些高分子钯络合物能够在常温常压下催化亚胺化合物的加氢反应并表现出不同程度的催化活性.对其中聚-(N,N-二乙酰基)-γ-氨丙基硅氧烷-钯络合物催化的亚苄基苯胺的加氢反应做了比较深入的研究,发现该催化剂在反应中是稳定的并给出唯一的加氢产物,络合物中的N/Pd原子比、反应温度以及不同底物对反应速度的影响也被报道.