Synthesis and Crystal Structures of Novel Keggin and Dawson Polyoxometalates Containing Amantadine

Heteropolyoxometalates are a large family of potent medicines due to their excellent antiviral and antitumor activity 1-4, while their application in clinic meets great difficulties for their toxicity 5. How to synthesize heteropolyoxometalate medicines possessing high activity and low toxicity has become the focus in heteropolyoxometalate medicine research. Previously reported polyoxometalates showing medical activities are all salts simple Na+, K+ or NH4+ etc. inorganic cations, in which o…     

Preparation and characterization O-lauroyl chitosan/poly (L-lactic acid) blend membranes by solution-casting approach

O-Lauroyl chitosan/poly(L-lactide) (OCS/PLLA) blend membranes with different compositions were prepared by solution-casting approach using chloroform as common solvent. The experimental results of FT-IR, DSC and WAXD indicated that inter-association hydrogen-bond interactions existed between OCS and PLLA in the blend membranes. And SEM observation confirmed that the blend membranes with suitable compositions were compatible.     

Heat shock protein 27 interacts with vimentin and prevents insolubilization of vimentin subunits induced by cadmium

Vimentin is an intermediate filament that regulates cell attachment and subcellular organization. In this study, vimentin filaments were morphologically altered, and its soluble subunits were rapidly reduced via cadmium chloride treatment. Cadmium chloride stimulated three major mitogen-activated protein kinases (MAPKs): extracellular signal-regulated kinase (ERK), c-Jun N-terminal kinase (JNK), and p38, and led apoptotic pathway via caspase-9 and caspase-3 activations. In order to determine whether MAPKs were involved in this cadmium-induced soluble vimentin disappearance, we applied MAPK-specific inhibitors (PD98059, SP600125, SB203580). These inhibitors did not abolish the cadmium-induced soluble vimentin disappearance. Caspase and proteosome degradation pathway were also not involved in soluble vimentin disappearance. When we observed vimentin levels in soluble and insoluble fractions, soluble vimentin subunits shifted to an insoluble fraction. As we discovered that heat-shock protein 27 (HSP27) was colocalized and physically associated with vimentin in unstressed cells, the roles of HSP27 with regard to vimentin were assessed. HSP27-overexpressing cells prevented morphological alterations of the vimentin filaments, as well as reductions of soluble vimentin, in the cadmium-treated cells. Moreover, HSP27 antisense oligonucleotide augmented these cadmium-induced changes in vimentin. These findings indicate that HSP27 prevents disruption of the vimentin intermediate filament networks and soluble vimentin disappearance, by virtue of its physical interaction with vimentin in cadmium-treated SK-N-SH cells.     

基于天然氨基酸的双环手性季铵盐相转移催化剂的合成及催化性能研究

以L－脯氨酸及L－羟基脯氨酸为原料合成了4个新型手性季铵盐磁相转移催化 剂，并用于催化不对称查耳酮环氧化反应，高产率得到相应环氧化合物，ee最高达 9％。     

Capillary electrophoresis with end-column amperometric detection of urinary 8-hydroxy-2'-deoxyguanosine

Urinary 8-hydroxy-2'-deoxyguanosine (8OHdG) is an excellent marker of oxidative DNA damage. Until now, urinary 8OHdG has been measured by high-performance liquid chromatography with electrochemical detection. A simple and sensitive method for the analysis of urinary 8OHdG by capillary electrophoresis with end-column amperometric detection has been developed in our laboratory. A single-step solid-phase extraction procedure was optimized and used for extracting 8OHdG from human urine. To improve the sensitivity of this method, a new focusing technique based on a dynamic pH junction was used. The limit of detection was 20 nM (signal-to-noise ratio S/N = 3), the linear range was 50 nM-10 microM, and the correlation coefficient was better than 0.999. The relative standard deviation (RSD) was found to be 0.57% for migration time, and 4.79% for peak current. To show the usefulness of the method, the urinary concentration of 8OHdG in nine healthy persons and ten cancer patients was determined. The urinary concentration of 8OHdG in cancer patients was significantly higher than that in healthy persons.     

有序自组装聚合物纳米结构

采用水辅助方法(water-assisted fabrication method),分别以4-十二烷基苯磺酸掺杂的聚苯胺(PANI-DBSA)和聚2-甲氧基-5-(2′-乙烯基-己氧基)苯乙炔(MEH-PPV)两种功能高聚物为成膜材料,冷凝水滴为模板,利用水滴在聚合物溶液表面的自组装,制备出了两种纳米层次以上的蜂窝状有序多孔聚合物薄膜.通过原子力显微镜和共聚焦荧光显微镜对其形貌、电学性质和荧光图像进行了表征.     

测定啤酒和白葡萄酒中有机酸的离子排斥色谱法

研究了离子排斥色谱法分离测定啤酒和白葡萄酒中有机酸；选用常见的盐酸溶液作淋洗液，以四丁基氢氧化铵为再生液，考察了淋洗液浓度、流量等因素对分离和测定的影响，对啤酒和白葡萄酒中常见有机酸在阴离子排斥色谱柱上的保留行为进行了系统的研究；通过试验确定最佳的色谱条件为盐酸浓度1．10mmol/L，流量0．80mL/min；四丁基氢氧化铵浓度5.0mmol/L，流量1.10mL/min；并在该条件下，测定了啤酒和白葡萄酒中的有机酸。     

Physicochemical aspects of microbial adhesion — Influence of antibody adsorption on the deposition ofStreptococcus sobrinus in a parallel-plate flow chamber

Deposition of the oral bacteriumStreptococcus sobrinus HG977 onto glass (water contact angle 0°) and onto FEP-Teflon (fluoroethylenepropylene; water contact angle 110°) was studied in a parallel-plate flow chamber in the presence and absence of polyclonal antibodies (pAb) and monoclonal antibodies (mAbs) adsorbed onto the cells. The zeta potentials of the bacteria ranged from −7.1 to −8.5 mV at pH 6.8 and were not affected by the presence of pAb or mAbs. Hydrophobicity (by water contact angles) increased from 30° (no antibodies) to 88° in the presence of pAb adsorbed onto the bacterial cell surface. The untreatedS. sobrinus had a greater tendency to adhere to glass (44.5 × 10⁶ cm⁻²) than to FEP-Teflon (18.3 × 10⁶ cm⁻²), in accordance with thermodynamic modelling. After preincubation ofS. sobrinus with pAb, its clear preference for adhesion to glass disappeared as expected from its increased hydrophobicity. Although forS. sobrinus preincubated with OMVU10 no difference was found in hydrophobicity in comparison to the untreated bacteria, the number of bacteria adhering to glass decreased to 10.2 ¢ 10⁶ cm⁻². Formation of bacterial aggregates was found whenS. sobrinus, preincubated with pAb or OMVU10, adhered to glass and FEP. This was also observed when untreated bacteria adhered to glass coated with OMVU10, or to FEP coaled with OMVU10 or pAb. Adhesion in these experiments is therefore thought to occur via near-neighbour collection induced by the presence of pAb or mAbs. Low numbers of bacteria were removed from glass after draining the flow cell, whereas high numbers of untreated bacteria and bacteria preincubated with OMVU10 were removed from FEP.S. sobrinus cells preincubated with pAb were not removed but piled up. It was concluded that the adhesion of untreatedS. sobrinus andS. sobrinus preincubated with pAb is in accordance with thermodynamic modelling, based on the overall wettability of the cell surfaces, whereas the adhesion ofS. sobrinus preincubated with OMVU10 may be through localized interactions, not expressed in overall surface properties.     

Thermodynamic studies of monuron

Monuron (C₉H₁₁ClN₂O; N,N-dimethyl-N′-(4-chlorophenyl) urea, CAS 150-68-5) was synthesized and the heat capacities of the compound were measured in the temperature range from 79 to 385 K with a high precision automated adiabatic calorimeter. No phase transition or thermal anomaly was observed in this range. The enthalpy and entropy data of the compound relative to the reference temperature 298.15 K were derived based on the heat capacity data. The thermodynamic properties of the compound were further investigated through DSC and TG analysis. The melting point, the molar enthalpy, and entropy of fusion were determined to be 447.6±0.1 K, 29.3±0.2 kJ mol⁻¹, and 65.4 J K⁻¹ mol⁻¹, respectively.     

Temperature-induced gelation of concentrated silicon carbide suspensions

Due to the steric barrier provided by the adsorption of the dispersant hypermer KD1 (a polyester/polyamine condensation polymer), stable and low-viscosity suspensions of SiC, Y(2)O(3), and Al(2)O(3) powder mixtures could be prepared in methyl ethyl ketone (MEK)/ethanol (E) solvent with solids loading as high as 60 vol%. The solvency of the dispersant in MEK/E decreased dramatically on cooling. Steady shear viscosity and oscillatory measurements were performed as a function of temperature for suspensions with different solids loading. The viscosity and elastic modulus of suspension increased with decreasing temperature and became more sensitive with the increase of solids loading. The suspensions with solids loading higher than 40 vol% could be solidified with decreasing temperature, but gelation temperature and gelation stiffness decreased with decreasing solids loading. The 60 vol% solid-loaded suspension was a stable and free-flowing fluid at 20 degrees C and gradually transformed to a very highly viscous and elastic system upon cooling to about 13 degrees C. Complete solidification occurred when the temperature was decreased to 5 degrees C. The gelation mechanism was mainly based on the collapse of the adsorbed layer as the temperature decreases, which induced incipient flocculation and formed a stiff network. The gelled body was further strengthened by separation of the dispersant from the suspension.