水溶性荧光聚合物用于测定聚赖氨酸

合成了一种水溶性荧光聚合物聚[5-甲氧基-2-(3-磺酰化丙氧基)-1,4-苯撑乙烯](MPS-PPV),对该聚合物进行了元素分析、红外光谱及透射电子显微镜表征.实验结果表明,聚赖氨酸(PLL)对该聚合物荧光具有明显的猝灭作用,据此建立了一种快速灵敏测定聚赖氨酸的新方法,检出限为5.0×10^-10mol/L.探讨了聚赖氨酸猝灭MPS-PPV荧光的机理.     

含液晶基团的聚对亚苯基亚乙炔基类交替共聚物的合成、表征及性能研究

合成了两种含氰基联苯液晶基团的新型聚对亚苯基亚乙炔基(PPE)类交替共聚物,并对其进行了结构表征和性能研究.示差扫描量热仪(DSC)和偏光显微镜(POM)的结果证明了在液晶单元含量较大时聚合物才会出现明显的液晶形态.荧光光谱表明,在降温前后液晶聚合物的发光光谱发生了明显的变化.同时,对聚合物进行能量转移研究发现随着溶液浓度的增加,Frster能量转移更加完全;另外,利用原子力显微镜(AFM)对聚合物降温前后的形态变化进行了观察.结果表明,液晶性质可以导致聚合物形态的变化进而带来发光光谱的改变,为今后制备液晶可控型发光聚合物提供了理论依据.     

基于聚合物核壳纳米粒子的Hg~(2+)比率型荧光检测传感器

采用一步聚合的方法,制备了以疏水的聚甲基丙烯酸甲酯(PMMA)为核、亲水性的聚电解质支化聚乙烯亚胺(PEI)为壳的纳米粒子分散液.将供体荧光团4-胺基-7-硝基-N-辛基苯并[1,2,5]噁二唑(NBD)以包埋的方式在聚合过程中直接引入PMMA核内部,而受体荧光团罗丹明衍生物SRHB通过吸附作用进入PEI-PMMA核壳界面,构成了含有两种不同荧光分子且可对Hg2+进行荧光比率检测的传感器.考察了含荧光分子的聚合物粒子光谱学性质,证明两种荧光分子均被引入了聚合物粒子体系.在汞离子的荧光检测试验中,加入Hg2+后,体系中的NBD荧光强度下降,而罗丹明的特征发射峰在579 nm处出现,并随着Hg2+浓度的增加,受体/供体的荧光强度比值呈现增长趋势.研究还发现,聚合物粒子基荧光探针对于Hg2+具有较好的选择性,且最佳使用范围是体系pH值在5～8之间,其检测Hg2+的最低浓度可达到1μmol/L.     

芘和蒽作为荧光探针探测树枝形聚合物微环境

分别以芘和(9-蒽基)甲基三甲基溴化铵(An)作为荧光探针研究了一系列羧基为外围末端基团的芳醚树枝形聚合物Gn(n=1-4)的内部微环境极性及包结情况. 芘荧光I1/I3值在1-3代树枝形聚合物钾盐水溶液中变化不大, 而3到4代有一个陡降, 推测1-3代树枝形聚合物处于相对开放的结构, G4为相对密闭的球形结构, 4代树枝形聚合物表现出更好的包结特性. An在树枝形聚合物G2钾盐水溶液中的荧光光谱结果表明, 树枝形聚合物G2可以包结两个以上的An分子, An分子疏水的蒽环部分位于树枝形聚合物内部孔穴中, 而带正电荷的铵离子靠近树枝形聚合物分子的极性末端.     

含三苯胺单元的共轭聚合物的合成、表征及应用

采用 Wittig 方法制得了未封端及封端的线性聚三苯胺-对苯乙烯撑型聚合物(分别简称为:TPA-DOPPV1,TPA-DOPPV2),并对共轭聚合物进行了表征和性能测试.封端后的聚合物溶液和固体膜在紫外光照射下均发出较强的绿光.对这类聚合物在硝基化合物检测方面的应用进行了初步研究,结果表明:封端后的共轭聚合物在邻硝基甲苯(o-NT)荧光检测上的性能明显提高,当o-NT 浓度为 21.5×10-3 mol/L 时,荧光猝灭效果达到了 96%;在2,4-二硝基甲苯(DNT)、对硝基甲苯(P-NT)和对苯醌(p-BQ)蒸汽中放置 10 s 时,其薄膜的荧光猝灭效率分别达到 30%、15.6%和 3.1%.TPA-DOPPV2 的合成操作较为简便,具有一定的检测灵敏性,是一种潜在的硝基类爆炸物荧光检测材料.     

可见光响应的荧光增白剂基多功能光引发体系

将4,4'-双(苯并噁唑-2-基)二苯乙烯(BBS)、 7-二乙氨基-4-甲基香豆素(C 1)、 双-(三嗪基氨基)-二苯乙烯二磺酸(CBUS 450)、 4,4'-双(2-磺酸苯乙烯基钠)联苯(CBS X)和1,4-双(2-苯并噁唑基)萘(OB 7)等5种含有不同荧光发射基团的商用荧光增白剂分别与二苯基碘鎓六氟磷酸盐(IOD)组成二元光引发体系, 再与N-乙烯基咔唑(或叔胺)组成三元光引发体系, 在可见光发光二极管(LED)光源辐照下, 通过自由基聚合反应制备丙烯酸酯树脂, 同时通过阳离子/自由基同步聚合反应制备互穿网络聚合物. 利用紫外-可见分光计荧光分光计、 电子自旋共振波谱仪、 傅里叶变换红外光谱仪、 扫描电子显微镜和原子力显微镜对荧光增白剂和互穿网络聚合物进行了表征. 研究结果表明, 荧光增白剂在可见光LED的照射下可作为具有高效能的多功能光引发剂. 其中苯并噁唑-萘衍生物(OB 7)、 三嗪茋衍生物(CBUS 450)、 二苯乙烯-联苯衍生物(CBS X)和香豆素衍生物(C 1)基二元光引发体系和三元光引发体系即使在空气中也表现出了优异的光引发能力.     

荧光共轭聚合物金属离子传感的机理研究

含金属离子识别单元[2,2′-联吡啶(bpy)、1,10-菲洛啉(phen)等]的荧光共轭聚合物金属离子传感的机理主要是引入金属离子所引起的聚合物主链构象的变化或是电子能级的变化.本文报导了两种属于这类荧光共轭聚合物的芴共聚物P1和P2在溶液中和固体薄膜状态下的金属离子传感性质,并研究了这类荧光共轭聚合物金属离子传感的机理.聚合物P1和P2分别是有20°二面角的bpy和平面的phen与芴交替共聚而成.研究发现P1、P2与金属离子络合后能够使吸收光谱红移,荧光猝灭,同时P2表现出更灵敏的金属离子传感性质.尤其是P2在固体状态下的高灵敏金属离子传感性质为金属离子荧光传感器的应用提供一种新的思路.P2的金属离子识别单元是平面的phen,在与离子响应过程中不需要发生构型转变,从而可以说明这类主链含金属离子识别单元的聚合物在与金属离子作用时,金属离子配位诱导聚合物电子能级的改变是金属离子传感的决定性因素.     

P(HPMA-FMA)荧光探针制备、细胞毒性评估及细胞吞噬示踪检测

以甲基丙烯酰氯、三乙胺和荧光素反应得到荧光素甲基丙烯酸酯(FMA),将其与聚N-(2-羟丙基)甲基丙烯酰胺(HPMA)以物质的量之比1∶10混合并通过引发剂偶氮二异丁腈(AIBN)引发聚合反应,生成带有荧光探针的聚合物P(HPMA-FMA)。采用台盼蓝排染法评估了该聚合物的细胞毒性,荧光显微镜和流式细胞仪观察和检测了全反式维甲酸(ATRA)诱导HL-60细胞分化过程中,P(HPMA-FMA)被细胞吞噬后的荧光示踪效应。结果表明:P(HPMA-FMA)的细胞毒性极低,当P(HPMA-FMA)的质量浓度为4~16mg/mL时对细胞增殖无影响;当其质量浓度为30μg/mL时即可满足荧光显微镜定性示踪观察和流式细胞术定量检测所需要的荧光强度。     

水溶性荧光共轭聚合物MPS-PPV的聚合新方法及其荧光波长调控研究

在NaOH/C_2H_5OH/DMF液中,实现了水溶性阴离子荧光共轭聚合物聚-[5-甲氧基-2-(3-磺酰化丙氧基)-1,4-苯撑乙烯](MPS-PPV)单体的快速聚合并提高了聚合产率.通过改变溶液中NaOH的浓度,实现了聚合物荧光发射波长的调控.对聚合物进行了元素分析、红外光谱以及分子量的表征,并探讨了不同聚合条件下得到的MPS-PPV的荧光和紫外光谱变化.研究了过氧化氢对MPS-PPV荧光发射波长及强度的影响,据此可测定过氧化氢.与单纯依赖荧光强度变化的过氧化氢检测法比,此法具有更高的选择性,为基于荧光聚合物的新型传感器研制提供了新思路.     

三苯胺-噁二唑超支化共轭聚合物的多光子泵浦绿色荧光

采用钯催化Heck反应制备了一种新型三苯胺-噁二唑超支化荧光聚合物PI. 用飞秒Ti:sapphire激光研究了PI的三光子和双光子上转换荧光光谱, 激发波长位于近红外区(800~1350 nm). 在1280 nm和80 fs激光激发下, PI的三光子上转换荧光发射波长分别为525 nm(THF), 534 nm(CH2Cl2)和578 nm(DMF). 在800 nm和150 fs激光激发下, PI的双光子上转换荧光发射波长分别为527 nm(THF), 532 nm(CH2Cl2)和573 nm(DMF). 采用非线性透过率法测定荧光聚合物PI的三光子和双光子吸收系数. 系统研究了PI的线性吸收和透过、单光子荧光、荧光寿命、前线轨道能级及热稳定性. 实验结果表明, 三苯胺-噁二唑超支化共轭聚合物的多光子吸收和上转换荧光发射性能比树型分子或线型聚合物更为优异.     

Application of tetrahydrofuran dispersant in microemulsion for fabricating titania mesoporous thin film

A new strategy was used to fabricate titania mesoporous thin film by incorporating tetrahydrofuran (THF) into the CTAB/n-butyl alcohol/cyclohexane/water reverse microemulsion as a micelle disperser. Highly dispersed and congregated TiO(2) particles in the microemulsion with and without THF were observed by transmission electron microscopy (TEM), respectively. The photographs observed by field-emission scanning electron microscopy (FE-SEM) show that a uniform titania mesoporous thin film with monodisperse TiO(2) spherical nanoparticles of ca. 20 nm was obtained using the microemulsion with THF.     

Chemical and physical modification and electret properties of polytetrafluoroethylene films

Composites with titanium oxide structures on the surface of a polymer matrix were prepared by preliminary plasma activation of polytetrafluoroethylene films, followed by chemical treatment with vapors of titanium tetrachloride and water. The chemical composition and structure of the modified film surface were studied by scanning electron microscopy, atomic force microscopy, and X-ray photoelectron spectroscopy. The stability of the formed surface charge increases in going from the initial film to the plasma-activated film, then to the film successively treated with vapors of titanium tetrachloride and water, and finally to the plasma-activated film treated subsequently with vapors of titanium tetrachloride and water. The modified polytetrafluoroethylene films are of interest as electrets with enhanced operation characteristics.     

Ti基底的预处理对TiO2光催化膜长期稳定性的影响

研究了Ti基底的预处理方法对其负载的TiO2薄膜光催化活性和长期稳定性的影响.分别采用扫描电子显微镜、X射线光电子能谱、X射线衍射和电化学交流阻抗谱对样品进行了表征,并考察了Ti基底负载的TiO2膜光催化降解模型污染物苯甲酰胺和活性艳红X-3B的活性.结果表明,采用普通Na2CO3预处理Ti基底时制得的TiO2膜层较疏松,并且由于Ti基底自身生成的TiO2钝化膜层不断生长而导致其负载的TiO2光催化膜层明显脱落流失,该TiO2膜在水中浸泡60 d后即完全失活.而在乙二酸活化法预处理的Ti基底上能制备出致密的TiO2光催化膜,可抑制Ti基底自钝化膜的生长,从而显著提高了负载TiO2光催化膜的抗脱落流失能力,在水中浸泡280 d后,其光催化活性仍不低于新制备样品活性的70%;而且在35 d的活性艳红完全脱色连续流实验中,该TiO2光催化膜基本未发生失活现象.     

Surface modification of PET films by atmospheric pressure plasma exposure with three reactive gas sources

The surface modification of poly (ethylene terephthalate) (PET) film was carried out using an atmospheric pressure plasma (APP) jet device with three reactive gases: air, N₂, and Ar. The water contact angles on the PET film were found to decrease considerably after the APP exposure. The changes in the advancing and receding contact angles of water on the APP-exposed PET film with aging time were examined by the wetting force measurements employing the Wilhelmy method. The hydrophobic recovery due to the rinsing with water as well as the aging in air was observed only for the advancing angle, which was probably caused by the dissolution of low molecular weight oxidized materials into water, the loss of volatile oxidized species to the atmosphere and the reorientation and the migration of polymer chains. The wettability and the surface free energy of the APP-exposed PET film after diminishing hydrophobic recovery was sufficiently large compared with the untreated film. X-ray photoelectron spectroscopy confirmed that the PET film surface was oxidized due to the APP exposure. When N₂ gas was used for the APP exposure, the surface nitrogen concentration was found to increase with decreasing D. The surface oxygen concentration on the APP-exposed PET film was reduced by rinsing with water, in accordance with the hydrophobic recovery behavior. From atomic force microscopy, surface topographical change due to the APP exposure was observed. The changes in the PET surface properties due to the APP exposure as mentioned above were remarkable for using N₂ gas.     

The cis-bis(decanoate)tin phthalocyanine/DPPC film at the air/water interface

Films made of cis-bis-decanoate-tin(IV) phthalocyanine (PcSn10) and racemic dipalmitoylphosphatidylcholine (DPPC) are studied with compression isotherms and Brewster angle microscopy (BAM) at the air/water interface. Films enriched in PcSn10 present phase separation elliptical-shaped domains. These domains present optical anisotropy and molecular order. They are enriched in PcSn10, and the film outside these domains is enriched in DPPC, as shown in by high-angle annular dark-field transmission electron microscopy on Langmuir-Blodgett (LB) transferred films. Film collapse area and atomic force microscopy images of LB transferred films on mica indicate that the films are actually multilayers. A computational survey was performed to determine how the PcSn10 molecules prefer to self-assemble, in films basically made of PcSn10. The relative energetic stability for several dimeric assemblies was obtained, and a crystal model of the film was developed through packing and repeating the PcSn10 molecules, along the crystallographic directions of the unit cell. Our results contribute to understanding the strong interaction between PcSn10 and DPPC at the air/water interface, where even small quantities of DPPC (~1-2%) can modify the film in an important way.     

In Situ Electrodeposition of an Asymmetric Sol–Gel Membrane Based on an Octadecyltrimethoxysilane Langmuir Film

The unique properties of Langmuir film formation were utilized in assembling a thin skin of an asymmetric membrane. An octadecyltrimethoxysilane (ODTMS) Langmuir monolayer was formed at the air–water interface and served as the substrate for growing a bulky sol–gel polymer in situ. The latter was based on the electrochemical deposition of tetramethoxysilane dissolved in the water subphase by means of horizontal touch electrochemistry. The resultant asymmetric layer that consisted of a thin hydrophobic ODTMS Langmuir film connected to a bulk hydrophilic sol–gel network was studied in situ and ex situ by using various techniques, such as cyclic voltammetry, electrochemical impedance spectroscopy (EIS), scanning electron microscopy, transmission electron microscopy (TEM), and goniometry. We found that a porous hydrophilic film grew on top of a hydrophobic layer as was evident from TEM, contact angle, and EIS analyses. The film thickness and film permeability could be controlled by changing the deposition conditions such as the potential window applied and its duration. Hence, this method offers an alternative approach for assembling asymmetric films for various applications     

Polysaccharide/Fe(III)-porphyrin hybrid film as catalyst for oxidative decolorization of toxic azo dyes: An approach for wastewater treatment

A hybrid film of chitosan/poly(vinyl alcohol)/cationic Fe(III)-porphyrin (Cht/PVA-FeTMPyP) was synthesized to act as a Fenton-like catalyst to decolorize methyl orange and methyl red azo dyes. The Cht/PVA-FeTMPyP film was characterized by different analytical and microscopy techniques, which indicated that the metalloporphyrin affects different properties of the hybrid film. Batch experiments revealed that the hybrid film exhibits enhanced catalytic activity towards dyes decolorization in the presence of H₂O₂ as compared to the “free” FeTMPyP. Fast decolorization rates as high as 90 min were observed for both azo dyes under mild conditions (pH 7 and room temperature), even at low concentrations of the catalyst in H₂O₂. After the decolorization, FTIR analysis showed that simple molecules are released as by-products. Moreover, the hybrid film performed well in cyclic runs without leaching out iron ions or losing its catalytic activity. All these features associated with its ease handling ranks the Cht/PVA-FeTMPyP hybrid film as a promising heterogeneous Fenton-like catalyst for the decomposition of azo dyes in water.     

Surface modification of high heat resistant UV cured polyurethane dispersions

To modify the surface of UV cured polyurethane dispersion (UV-PUD), fluorinated PU called surface modifying agent (SMA) was blended with base PU prior to dispersion in water. X-ray photoelectron spectroscopy (XPS) and contact angle measurements showed that surfaces of dispersion cast film are significantly enriched with fluorine groups. Atomic force microscopy (AFM) showed that surface was roughened with the addition of SMA, which provided possible mechanism of increased water resistance as well as low friction coefficient of the film. On the other hand, hardness, mechanical and dynamic mechanical properties indicated that the bulk properties are marginally altered by the additive amount of SMA.     

改性生物柴油碳烟的制备、表征及水基润滑特性

为了探索生物柴油碳烟(BDS)作为水基润滑添加剂的应用, 采用热氧化法制备了热氧化处理的BDS(TO-BDS); 通过场发射透射电子显微镜、 X射线光电子能谱仪和Zeta电位仪等表征了TO-BDS的形貌、 组成和分散性, 并与BDS进行了对比; 利用球-盘往复摩擦磨损试验机、 3D激光扫描显微镜、 场发射扫描电子显微镜、 光学法接触角/界面张力仪和拉曼光谱仪考察了含TO-BDS的纯水(H₂O)的摩擦磨损性能和润滑机理. 结果表明, TO-BDS表面的含氧官能团和负电荷比BDS更多, 从而导致TO-BDS在H₂O中具有更好的分散性; 在H₂O中添加质量分数为0.2%的TO-BDS, 可显著改善H₂O的减摩抗磨性能. 这主要是因为在摩擦过程中, TO-BDS起到滚动轴承的功效, H₂O+TO-BDS比H₂O在摩擦副表面的润湿性能更好, 更易于形成润滑膜且TO-BDS会因摩擦力诱导剥离产生石墨片, 从而降低摩擦磨损.     

Collapse transition in thin films of poly(methoxydiethylenglycol acrylate)

The thermal behavior of poly(methoxydiethylenglycol acrylate) (PMDEGA) is studied in thin hydrogel films on solid supports and is compared with the behavior in aqueous solution. The PMDEGA hydrogel film thickness is varied from 2 to 422?nm. Initially, these films are homogenous, as measured with optical microscopy, atomic force microscopy, X-ray reflectivity, and grazing-incidence small-angle X-ray scattering (GISAXS). However, they tend to de-wet when stored under ambient conditions. Along the surface normal, no long-ranged correlations between substrate and film surface are detected with GISAXS, due to the high mobility of the polymer at room temperature. The swelling of the hydrogel films as a function of the water vapor pressure and the temperature are probed for saturated water vapor pressures between 2,380 and 3,170?Pa. While the swelling capability is found to increase with water vapor pressure, swelling in dependence on the temperature revealed a collapse phase transition of a lower critical solution temperature type. The transition temperature decreases from 40.6?°C to 36.6?°C with increasing film thickness, but is independent of the thickness for very thin films below a thickness of 40?nm. The observed transition temperature range compares well with the cloud points observed in dilute (0.1?wt.%) and semi-dilute (5?wt.%) solution which decrease from 45?°C to 39?°C with increasing concentration.