过氧化氢选择性氧化硫醚的研究进展

亚砜和砜类化合物具有广谱生物活性而有广泛的应用前景,同时作为有机合成的重要中间体广泛应用于碳-碳键形成、分子重组反应中.硫醚直接氧化是制备亚砜和砜的主要方法之一.在众多关于硫醚选择性氧化反应的研究中,过氧化氢作为清洁氧化剂备受关注.鉴于此,就过氧化氢选择性氧化硫醚反应中的重要金属催化体系和一些非金属催化体系的研究状况作一综述,简要介绍各类催化氧化体系的催化效果.     

固载离子液体刷/过氧磷钨酸盐催化剂催化H2O2选择性氧化硫醚

以二氧化硅为载体,合成了一种新型的双层离子液体刷固载过氧磷钨酸盐催化剂.采用元素分析、IR和SEM-EDAX等手段对催化剂进行了表征.室温下,考察了该催化剂催化30％(质量分数)H2O2溶液选择性氧化硫醚为亚砜或砜的催化性能.结果表明,该催化剂具有很高的催化活性和选择性.采用1.1倍H2O2时,反应选择性地生成亚砜,仅...     

生物油模型化合物催化裂化制备芳香烃的实验研究

通过HZSM-5分子筛催化剂对生物油典型模型化合物(乙酸、愈创木酚、正庚烷和环己烷等)在550℃进行了催化裂化反应,研究模型化合物催化裂化特性和反应机理以及催化剂性质。结果表明,正庚烷和环己烷裂化产物主要是芳香烃(53%和91%,均为积分面积分数),对于此类不含氧的模型化合物,催化裂化反应过程更容易进行;随着催化剂用量的增加,可以有效增加乙酸裂化产物中芳香烃含量(12%到90%,均为积分面积分数);愈创木酚结构比较复杂,HZSM-5催化剂主要脱除了甲氧基,催化剂用量的增加可以使芳香烃类稳定物质更容易形成。     

浅谈珠脑速算的发展前景

珠脑速算教育是启迪智力，进行素质教育，功在当代，利在千秋的“重要工程”它具有早期开发儿童智力，增强儿童感知力、想象力、记忆力等功能，那么这项科研项目，它的发展前景如何?成为从事这项科研的工作者和教育者普遍关注的问题。     

选区激光熔化及热处理工艺对钴铬合金力学性能的影响

系统研究了选区激光熔化（SLM）及热处理工艺对钴铬合金组织与性能的影响。通过设计正交实验,利用EOS M290选区激光熔化设备,优化钴铬合金成型的工艺参数;利用XRD、扫描电镜（SEM）、硬度仪及万能材料试验机对选区激光熔化钴铬合金的显微组织结构、物相组成及力学性能进行观察与测试。研究结果表明,选区激光熔化成型的最佳工艺参数为:扫描间距0.08 mm,扫描速度1110 mm/s,激光功率335 W,能量密度4.8 J/mm2,获得的致密度高达99.18%,且最佳的填充角度为67。SLM成型的钴铬合金的物相主要由相及少量相共存,微观组织由细小均匀的胞状晶及柱状晶构成;其硬度、抗拉强度及延伸率分别为41.0HRC,1032 MPa,10%,断裂机制主要为穿晶脆性断裂。热处理后显微组织发生相变,主要为相及少量相,并产生少量强化相M23C6(M=Cr,Mo,W);其硬度、抗拉强度及延伸率分别提升了6.1%,35.9%和17.6%,断裂机制主要为准解理断裂。     

质子数Z 分别位于Ru 之上和之下的A~(100~126) 丰中子原子核三轴形变在原子核形状变迁和共存中的重要作用(英文)

基于Ru (Z = 44) 丰中子同位素中存在最大三轴形变的理论预言和实验证据,综述了近年来Rh (Z = 45),Pd (Z =46), Ag (Z =47), Cd (Z =48)(质子数Z 位于Ru,Z =44 之上)及Zr (Z =40), Nb (Z =41), Mo (Z =42),Tc (Z =43)(质子数Z 位于Ru,Z =44 之下) 的A~ (100~126) 丰中子同位素中关于三轴形变的形状变迁和形状共存系统性研究的重要进展。252Cf 自发裂变瞬发 射线-- 三重符合、特别是新建立的--- 四重符合数据的系统观测和研究,在Ru, Pd, Cd 和Nb 丰中子同位素中显著扩展或首次观测到了一系列能带,为这个核区原子核形状的研究提供了新的、重要的实验数据。联系此前报道的有关进展,使用PES, TRS, PSM, CCCSM 和SCTAC 理论模型计算拟合新的实验数据,在该核区沿同中素和同位素链,并随自旋和激发能变化各自由度,跟踪原子核形状渐进变化,获得了新的系统性研究成果,显著扩展和深化了人们对原子核形状变迁和形状共存的认知。对于Ru 及其上的Rh (Z = 45), Pd (Z = 46), Ag (Z = 47) 和Cd (Z = 48) 丰中子同位素的研究表明:Rh 丰中子核具有比最大值稍小的三轴形变,γ = 28°,并在103{106Rh 同位素链上鉴别出了手征对称破缺;在三轴形变核112Ru和114Pd(N = 68)中发现了三轴原子核的摆动运动,该摆动运动也可能在114Ru (N = 70)中存在;观察到了从具有最大三轴形变的110,112Ru 中手征破缺到稍小三轴形变的112,114,116Pd 中扰动的手征破缺的过渡;在较软的Ag 核中观察到了丰富的谱学结构,在104,105Ag 中鉴别出了可能的手征对称破缺,在较重的115,117Ag 中提出了趋于三轴形变的软度;具有小形变的Cd核的能级结构被解释为准粒子耦合、准转动和软三轴形变;最近的库伦激发的研究提供了Z = 50, N = 82满壳附近122,124,126Cd 核中出现核集体性的实验和理论证据;上述研究成果展现出从Ru中的最大三轴形变(γ=30°,三轴形变极小增益为0.67 MeV), 经具有大三轴形变的Rh核γ=28°),到Pd核中的稍小、但稳定于中等自旋到高自旋区的三轴形变(γ~41°,三轴形变极小增益为0.32 MeV),再经Ag核中的软度,最后到具有很小形变、但仍出现集体性质、包括软三轴形变的Cd核的过渡。对于Pd核转动带交叉系统性的研究揭示了其第一带交叉(νh_11/2)2 中子转动顺排的上行驱动,和第二带交叉(πg_9/2)2质子转动顺排的下行驱动效应,成功地解释了114Pd 中的三轴摆动运动,并给出了110-118Pd同位素链中理论早已预言、而比早期理论预言更为完整准确的形状渐进变迁和形状共存的图像。根据该核区的系统研究,发现最大三轴形变出现在112Ru,而在相邻的偶Z(Pd)同位素链,三轴形变极小的中心在114Pd, 两者均为N = 68。上述系统性研究沿相邻的Ru和Pd偶Z同位素链,在N =68同中素中鉴别出最大三轴形变,均比理论预言的108Ru 和110Pd 多4个中子。在Z值位于Ru (Z = 44) 之下的Zr (Z = 40), Nb (Z = 41), Mo (Z = 42) and Tc (Z = 43) 丰中子同位素中,Y和Zr核具有很强的轴对称四极形变,而在较重的Zr同位素中出现了自由度;较重的Nb核(A = 104~106) 基态具有中等程度的软三轴形变和强四极形变,随着自旋和激发能的增加,过渡到接近于轴对称的强四极形变;而较轻的Nb核(A≤103) 基态均接近轴对称形状;在Nb同位素链上基态由球形到强四极形变的形状突变发生在100Nb(N = 59),在100-106Nb同位素链中基态的软三轴形变随中子数增加而增加;在Nb核中还观察到关于软三轴形变的形状共存;Mo核具有大的三轴形变,观察到了振动和手征对称破缺;Tc核具有比最大值稍小的三轴形变,γ=26°,并观察到了手征对称破缺。质子数Z从41到48的A~(100~126)丰中子同位素,特别是Pd和Nb 同位素,呈现出关于三轴形变的过渡特征。This paper reviews the systematic investigations and understanding for the shape transitions and coexistence with regard to triaxial deformations in A s 100 to 126 neutron-rich Rh (Z = 45), Pd (Z = 46), Ag (Z = 47), Cd (Z = 48) and Zr (Z = 40), Nb (Z = 41), Mo (Z = 42), Tc (Z = 43) isotopes with Z beyond and below Ru (Z = 44), respectively, in Ru the maximal triaxial deformation having been predicted and deduced. The recent measurements and studies of prompt triple- and four-fold, γ-γ-γ and γ-γ-γ-γ, coincidence data from the spontaneous fission of 252Cf using Gammasphere have yielded considerable expansion and extension or first observation of the bands in Ru, Pd, Cd, and Nb isotopes,which provided important data for the studies of nuclear shapes in this region. Combined with previous investigations, recent systematic studies of the new data well reproduced by PES, TRS, PSM, CCCSM and SCTAC model calculations have traced shape changes along the isotonic and isotopic chains, respectively,and with changing excitations/spins as well, significantly expanding our knowledge of shape transitions/coexistence in nuclei.For the neutron-rich Ru and beyond, Rh, Pd, Ag and Cd isotopes, triaxial deformations γ= 28°,slightly smaller than the maximal value, were deduced in Rh (Z = 45) isotopes, with chiral symmetry breaking proposed in 103-106Rh; onset of wobbling motions were identified in 112Ru and 114Pd (N =68),and probably also in 114Ru (N =70); evolution from chiral symmetry breaking in 110,112Ru with maximal triaxial deformations to disturbed chirality in 112,114,116Pd with less pronounced triaxial deformations was proposed; rich nuclear structure was proposed in soft Ag isotopes with possible chiral doubling structure suggested in 104,105Ag, and softness towards triaxial deformation proposed in heavier 115,117Ag;quasi-particle couplings, quasi-rotations and soft triaxiality were suggested in Cd (Z =48) isotopes with small deformations; onset of collectivity was recently suggested in 122,124,126Cd in the vicinity of Z =50 and N = 82 closed shells by studies of Coulomb excitations; shape evolutions from maximal triaxial deformations in Ru (γ=30°, with triaxial minimum energy gain of 0.67 MeV), through Rh with large triaxial deformations ( γ=28°), to less pronounced triaxiality in Pd (with triaxial minimum energy gain of 0.32 MeV), then soft triaxiality in Ag, and finally to slightly deformed Cd isotopes but with emergence of collectivity and soft triaxiality were proposed. The systematic studies of the band crossings in Pd revealed up-rising drivings of the first band crossings caused by (νh_11/2)2 and down-sloping drivings of the second band crossings by (πg_9/2)2, explained the onset of wobbling motions in 114Pd,and showed a long-sought picture of shape evolution and coexistence in the Pd isotopic chain which is more complete but complex than earlier predictions. Based on the systematic studies in the mass region,maximal triaxial deformation is found to be reached in 112Ru and less-pronounced triaxiality centered at 114Pd, both for N =68, four neutrons more than predicted in earlier theoretical calculations.In the neutron-rich Zr (Z =40), Nb (Z =41), Mo (Z =42) and Tc (Z =43) isotopes with Z just below Ru, large quadrupole deformations of axially symmetric shapes were deduced in Y and Zr isotopes, with emergence of the degree of freedom having been suggested for heavier Zr isotopes; medium triaxial deformations were deduced for the ground states of heavier (A > 104) Nb isotopes, and, with increasing excitations and spins, evolution from medium triaxial deformations with strong quadrupole deformations at ground states to nearly axially-symmetric shapes were deduced; light Nb isotopes (A6103) have near axially-symmetric shapes with strong quadrupole deformations; combining with the identification of onset of strong quadrupole deformation at 100Nb in the Nb isotopic chain, an increase of soft triaxiality with increasing neutron number was proposed in 100-106Nb. Shape coexistence with regard to soft triaxiality is also proposed in Nb isotopes; large triaxial deformations, vibrations and chiral doublets were proposed in Mo isotopes; chiral doubling and large triaxial deformations (γ ~26°) slightly smaller than the maximal triaxiality were suggested in Tc isotopes.The neutron-rich nuclei with Z ranging from 41 through 48 and A ~100 to 126, especially the Pd and Nb isotopes are thus found to be transitional nuclei with regard to triaxiality.     

双侧下颌支矢状劈开截骨术后患者可施加合适咬合力的数值研究

双侧下颌支矢状劈开截骨术在临床手术中广泛用于治疗缩颌、凸颌和颌面不对称患者的颌面畸形症状。本文用数值方法研究双侧下颌支矢状劈开截骨术并前移下颌骨后患者可施加的合适咬合力。首先,用缩颌患者的CT断层扫面数据建立下颌骨、关节盘、关节窝和相关软组织的高度几何相似性的几何模型;然后,用有限元模型模拟双侧下颌支矢状劈开截骨术后患者的咬合过程。通过分析发现,术后关节盘上的位移处于正常的范围,而应力却远远超过正常范围,因此,将应力因素作为确定术后患者可施加的合适咬合力的标准。当施加正常咬合力的25%时,关节盘上的应力分布和术前没有显著性差异,同时下颌骨上的应力水平也处于正常范围。     

表面张力对Rayleigh-Taylor不稳定性谐波的影响

Using the method of the parameter expansion up to the third order, explicitly investigates surface tension effect on harmonics at weakly nonlinear stage in Rayleigh-Taylor instability (RTI) for arbitrary Atwood numbers and compares the results with those of classical RTI within the framework of the third-order weakly nonlinear theory. It is found that surface tension strongly reduces the linear growth rate of time, resulting in mild growth of the amplitude of the fundamental mode, and changes amplitudes of the second and third harmonics, as is expressed as a tension factor coupling in amplitudes of the harmonics. On the one hand, surface tension can either decrease or increase the space amplitude; on the other hand, surface tension can also change their phases for some conditions which are explicitly determined.     

可中断的多任务平行机排序问题

Leung等(Preemptive multiprocessor order scheduling to minimize total weighted flowtime [J]. European Journal of Operational Research, 2008, 190: 40-51)研究了如下问题: 有 n 个订单, 其中每个订单 i 含有 n_i 个不同的工件. 所有的订单在零时刻已经到达, 并且工件的加工是可中断的. 每个订单 i有一个权重 \omega_i, 定义订单 i 的完工时间 C_i 为订单 i 最后一个完工工件的完工时间. 目标是找到一个可行排序使得加权总完工时间\sum\limits_{i=1}^n \omega_iC_i 最小. Leung等证明了这个问题是NP-难的, 给出了一个近似算法, 并且分析了该算法的最坏情况界. 但是定理2的证明存在一些错误. 证明了尽管定理2的证明过程存在错误, 但是其结论仍然正确. 另外, 对上述模型的一种特殊情形给出了更好的近似算法.