丙烯环氧化反应中失活钛硅分子筛的无氧脱附研究

采用无氧脱附方法对丙烯环氧化中失活的薄层钛硅分子筛(即Spent EPO-4)和环氧丙烷(PO)与丙二醇单甲醚(MME)浸渍的TS-1催化剂(即PO／TS-1和MME／TS-1)进行了研究，脱附产物由气相色谱定性分析，无氧脱附后的催化剂以丙烯环氧化为探针反应进行再生性能评价，同时在无氧条件下考察了TS-1在300℃时催化裂化PO反应．实验结果表明：PO浸渍TS-1可使其活性明显下降，PO在TS-1上不是简单的弱吸附，存在着化学强吸附和自聚．失活催化剂(Spent EPO-4和PO／TS-1)经无氧脱附后，其催化活性可显著恢复．通过对失活催化剂脱附产物的比较，推测了丙烯环氧化反应过程中钛硅分子筛失活原因．     

柠檬酸溶胶-凝胶法制备的Ce1-xZrxO2: 结构及其氧移动性

采用 XRF、XRD、Raman、XPS、H₂-TPR 以及与氩离子刻蚀相结合的XPS等表征技术对柠檬酸溶胶-凝胶法制备的Ce_1-xZr_xO₂ (0≤x≤1)样品的结构及其氧移动性进行了研究. 结果表明, Ce_1-xZr_xO₂ 样品的晶型结构对其中氧的移动性有明显影响. 当x≤0.15 时, Ce_1-xZr_xO₂ 以立方CeO₂相 Ce-Zr-O 固溶体存在, 随着Zr含量的逐渐增加, CeO₂晶胞体积减小、氧空位浓度增加, 氧移动性逐渐增强; 当x＞0.15时, 形成四方ZrO₂相和立方CeO₂相Ce-Zr-O固溶体的混合物, 随着Zr含量的逐渐增加, 四方ZrO₂相的含量增加、氧空位浓度减小, 氧移动性逐渐减弱. 因此, Ce_0.852Zr_0.152O₂样品具有最高的氧移动性.     

Geometrical optics-based ray field tracing method for complex source beam applications

Due to the fact that traditional ray field tracking approaches require a large number of geometrical optical(GO) ray tubes,they are very inefficient in many practical applications.An improved ray model scheme for a complex source beam(CSB) tracking technique is proposed in this paper.The source field can be expressed by a superposition of CSBs,then every CSB basis function has a Gaussian-type amplitude distribution and is suitable for replacing a GO ray tube in the ray tracing approach.The complex phase matching technique is adopted to find the reflected beam in the reflection point where local approximation is used to represent the curved surface in its neighborhood.A new solution to multiple reflections using the conventional right-handed reflected system is used to track the field easily.Numerical results show the accuracy of the proposed method.     

金属-有机骨架化合物为前驱体制备CuO/CeO2催化剂及在富氢条件下催化CO的氧化

采用金属-有机骨架化合物(MOFs)Ce(1,3,5-BTC)(H2O)6为前驱体浸渍Cu2+离子后焙烧得到CuO/CeO2催化剂(B系列),并应用于富氢气氛中CO优先氧化反应(CO-PROX).通过与CuO/CeO2催化剂(A-600)对比发现,不同的MOFs前驱体对催化剂铜活性物种的分散程度有很大影响.X射线衍射分析(XRD)、透射电子显微镜(TEM)和氛气程序升温还原(H2-TPR)等表征均证明B系列催化剂表面铜有聚集现象,由此增加了催化剂的抗H2O和CO2性能.     

基于自交联杂萘联苯聚芳醚阴离子交换膜制备及其物理化学性质

以氯甲基杂环聚醚酮(CMPPEK)为原料,加入三乙胺进行铵化,并分别加入二乙烯三胺(DETA)和二乙胺(DEA),生成的仲胺基(或叔胺基)与邻近分子链氯甲基团进行自交联.经过制膜和离子交换反应,制备了DETA自交联杂萘联苯聚芳醚阴离子交换膜(DETA-QPPEK-OH)和DEA自交联杂萘联苯聚芳醚阴离子交换膜(DEA-QPPEK-OH).采用傅里叶变换红外(FTIR)光谱对制备自交联膜的化学结构进行表征.研究了DETA-QPPEK-OH和DEA-QPPEK-OH膜的理化性质,结果表明前者具有较低吸水率和更低溶胀度.通过研究DETAQPPEK-OH和DEA-QPPEK-OH膜的离子传导率随温度的变化规律,结果表明在80°C时其离子传导率分别达到0.060和0.028 S cm-1,表明本文制备的自交联膜具有较高离子传导率.此外还通过热重分析(TGA)对两类自交联膜的热稳定性进行了研究.     

复合软模板法可控制备红毛丹状AlOOH/Al2O3纳米材料

以Al(NO₃)₃为铝源,尿素为均相沉淀剂, 在聚乙二醇400(PEG4000)-DL-天冬氨酸形成的复合软模板体系中, 通过简单的常压回流方式成功合成出形貌和尺寸较为均一的红毛丹状γ-AlOOH纳米结构, 继而考察了反应物和添加剂用量对前驱体形貌和尺寸的影响, 并对γ-AlOOH纳米结构可能的形成机理进行了探讨. 实验结果表明, 所合成的红毛丹状γ-AlOOH具有球中球的核壳结构, 统计得内球直径约为400 nm, 外壳外径约为600 nm, 密集状态的壳层厚度约为15 nm, 毛刺状凸出物长度可达60 nm以上. 前驱体样品经600℃煅烧5 h后即转变为具有良好形貌继承性的γ-Al₂O₃, Brunauer-Emmett-Teller (BET) N₂-吸附实验表明其比表面积高达299.97 m²·g^-1.     

Efficiency Enhancement of Dye-Sensitized Solar Cells： Using Salt CuI as an Additive in an Ionic Liquid

Energy conversion efficiency of the dye-sensitized solar cell is improved from 3.5% to 4.5% by adding a small amount of CuI into an ionic liquid electrolyte. It is found that other copper-I salts, for example, CuBr, have the same effect for the dye-sensitized solar cell. Experimental results show that no Cu^2＋ ions exist in this electrolyte. It is suggested that this improvement is caused by the adsorption of Cu^＋ onto the TiO2 porous film.     

Analysis of secondary electron emission using the fractal method

Based on the rough surface topography with fractal parameters and the Monte–Carlo simulation method for secondary electron emission properties, we analyze the secondary electron yield(SEY) of a metal with rough surface topography. The results show that when the characteristic length scale of the surface, G, is larger than 1 × 10^-7, the surface roughness increases with the increasing fractal dimension D. When the surface roughness becomes larger, it is difficult for entered electrons to escape surface. As a result, more electrons are collected and then SEY decreases. When G is less than 1 × 10^-7,the effect of the surface topography can be ignored, and the SEY almost has no change as the dimension D increases. Then,the multipactor thresholds of a C-band rectangular impedance transfer and an ultrahigh-frequency-band coaxial impedance transfer are predicted by the relationship between the SEY and the fractal parameters. It is verified that for practical microwave devices, the larger the parameter G is, the higher the multipactor threshold is. Also, the larger the value of D,the higher the multipactor threshold.     

SPME/GC-MS分析冷水花的挥发性成分

利用固相微萃取/气相色谱-质谱（SPME/GC-MS）联用技术分析冷水花挥发性化学成分。共鉴定出61个化学成分,占总挥发性成分的98.42%。冷水花挥发性化学成分主要是1-甲基-5-甲烯基-8-（1-异丙基）-[s-（E,E）]-1,6-环癸二烯（20.03%）,石竹烯（13.38%）,1-萘胺（5.27%）,愈创兰油烃（5.20%）,N-（4-羟苯基）-丁酰胺（5.12%）,α-法呢烯（4.73%）,1-甲基-1-乙烯基-2,4-二丙烯基-环己烷（4.59%）等。     

冲击法测量磁感应强度实验的数字化解决方案

介绍了冲击法测量磁感应强度实验的基本原理,利用当今成熟的V／F变换技术和单片机技术,实现了对电压积分的测量,解决了冲击法测量磁感应强度实验的数字化问题．