基于相场描述的拉压不对称强度结构拓扑优化

运用了基于相场描述的拓扑优化方法，来寻找在拉伸和压缩中表现出不对称强度行为的连续体结构的最优布局。依据Drucker-Prager屈服准则和幂率插值方案，优化问题可以描述为在局部应力约束下的最小化结构的体积。用qp放松法来解决应力约束的奇异性，并采用基于P-norm函数的聚合方法对应力约束进行凝聚，该方法实现了约束个数的降低，同时引入了稳定转化法来处理大量的局部应力约束和高度非线性的应力行为，以修正应力，提高优化收敛的稳定性。在优化问题求解时，使用拉格朗日乘子法对目标函数和应力约束进行处理。利用伴随变量法进行灵敏度分析，并通过求解Allen-Cahn方程更新相场函数设计变量。数值算例证明了该优化模型和相应数值技术的有效性，相关算例还揭示了考虑拉压不同强度和考虑同拉压强度约束时得到的结构优化拓扑构型具有显著的差异。     

A类算子n次根的代数扩张是次标量算子

研究了A类算子n次根的代数扩张.特别地,利用空间分解技巧得到每个A类算子n次根的代数扩张是次标量算子.作为应用,考虑了此类算子的Weyl型定理和超不变子空间问题.     

依从者平均因果效应的统计推断

本文主要研究临床试验中出现不依从现象时依从子总体的平均因果效应的统计推断。考虑在实际服药状态是二值变量且有相关性,治疗响应变量连续取值的情形,同时考虑协变量对治疗效果有影响的情况下,给出了治疗效果参数的可识别性及近似条件极大似然估计,且构造了记分检验统计量。对特殊模型进行了模拟,结果表明与理论预期一致。     

“光纸”开启灯光新纪元

如果光也可以像纸一样打印,还能被运用到任何物体表面,你会如何使用它?来自美国的Rohinni公司发明了一种"光纸",它是一种打印光的形式,可以把光打印成任何形状,从而运用到不同物体表面和不同场景中去。是不是觉得这有点像3D打印?Rohinni公司的CMOSmoot说:"我们不知道将来光纸在相关平台上会有怎样的应用,我们所知道仅仅是如何开启制造光的大门。"     

浮升力和流动加速对超临界CO2管内流动传热影响

基于单相流体的概念,超临界流体的异常传热行为已经被研究很多年了,但是关于其流动传热机理仍没有统一的认识.本文通过理论分析和实验研究了超临界二氧化碳在竖直管内向上流动过程中,浮升力和流动加速效应对其流动结构和传热过程的影响.结果表明,没有确凿的实验证据表明超临界流体的异常传热行为是浮升力和流动加速直接导致的,存在的估计浮升力和流动加速效应准则均是在常物性流体的基础上,做了大量假设得出的,不同的研究者采用浮升力和流动加速准则分析超临界流体的传热恶化得出的结论不一致.最后,基于拟沸腾理论分析超临界流体的传热恶化过程,提出超临界沸腾数区分了超临界流体正常传热与恶化传热的转换边界,为超临界流体流动传热研究提供新思路,超临界沸腾数对建立用于不同技术的超临界流体动力循环的最佳运行条件具有重要意义.     

一个p(x)-Laplace方程组非平凡解的存在性

在广义Lebesgue空间L~(p(x))(Ω)和广义Sobolev空间W~(1,p(x))(Ω)基本理论体系的基础上,利用山路引理,Young不等式,H(o|¨)lder不等式和嵌入定理,获得了一p(x)-Laplace方程组非平凡解的存在性.     

高校教师激励与约束机制分析

最有效的管理方式是对人的激励,高校管理的核心是通过激励以最大限度地调动与发挥教师的积极性和创造性.运用博弈论方法和委托-代理理论探析信息不对称下高校教师的激励与约束机制,对教师校外兼职问题进行博弈分析,提出健全高校教师激励与约束机制的建议.     

欧盟REACH法规中钴、砷、铬、锡、铅等高关注物质X射线荧光光谱法定量筛选用橡胶标准样品的研制

<正>欧洲化学品管理署(ECHA)于2008年10月至今已公布8批、共计138种高关注物质(SVHC),包括含钴、砷、铬、锡和铅的高关注物质共30多种物质,它们广泛应用于塑料、橡胶、染料、油漆、涂料等多个领域。因残留在橡胶和塑料制品中的高关注物质危害人类的健康,欧盟REACH法规[1]规定进入欧盟的化学品若高关注物质含量超过0.1%,必须向欧洲化学品管理署通报。X射线荧光光谱法(XRF)由于具有准确度高、     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.