异质结Bi_2WO_6/ZnO复合光催化剂的制备及其光催化降解含酚废水的研究

采用水热法制备了一系列Bi2WO6/Zn O异质结光催化剂,并对其进行X射线衍射(XRD)、紫外-可见光谱(UV-Vis DRS)、扫描电镜(SEM)、光电子能谱(EDS)等手段对其结构性质进行了表征。在含酚废水的液相反应体系中,研究了异质结Bi2WO6/Zn O复合光催化剂光催化降解苯酚的性能。结果表明,Bi2WO6/Zn O异质结的形成可以有效的抑制光生电子和空穴对的结合,使其光催化活性明显优于纯的Zn O和Bi2WO6;另外,异质结型Bi2WO6/Zn O复合光催化剂的表面OH·自由基更有利于光催化活性的提高。当Bi2WO6复合量为4wt%时,异质结Bi2WO6/Zn O复合光催化剂光催化降解苯酚的效果最佳。     

Photocatalytic removal of tetracycline by a Z-scheme heterojunction of bismuth oxyiodide/exfoliated g-C3N4: performance,mechanism, and degradation pathway

Antibiotics, once being released into the environment, become recalcitrant organic pollutants, which pose a potential risk to ecological balance and human health. In this study, a Z-scheme heterojunction of bismuth oxyiodide (BiOI)/exfoliated g-C₃N₄ (BiOI/ECN hereafter) was synthesized by the combination of thermal exfoliation of g-C₃N₄ and chemical precipitation of BiOI for efficient photocatalytic degradation of tetracycline in aqueous solutions under visible light irradiation. The optimized BiOI/ECN delivered an outstanding degradation rate at circa 0.0705 min^?1, which was 10 times higher than that of the bulk g-C₃N₄. The photocatalytic degradation efficiency of tetracycline remained almost unchanged in a pH range of 3–11, and the BiOI/ECN displayed an excellent photostability upon recycled usage. The photocatalytic mechanism of tetracycline was ascribed to the main reactive oxidation species of photogenerated holes and superoxide radicals. In addition, the possible degradation pathways of tetracycline were investigated by HPLC-MS to identify intermediates. The toxicity of photocatalytic-generated intermediates of tetracycline was found significantly alleviated according to the calculation of quantitative structure–activity relationship prediction. This work not only provides an attractive photocatalyst for the removal of tetracycline but also opens a new avenue for rational design of Z-scheme heterojunction composites for tetracycline degradation.     

直接Z型LaNiO3/Mn0.2Cd0.8S异质结催化剂光解水产氢性能及机理探究

以LaNiO_3纳米颗粒为基质,在水热法制备CdS的过程中引入Mn~(2+)离子,原位合成直接Z型LaNiO_3/Mn_(0.2)Cd_(0.8)S异质结光催化剂。分别采用场发射扫描电镜、X射线衍射、X射线光电子能谱、紫外可见漫反射光谱、氮气吸附-脱附测试以及电化学测试等分析方法对制备的催化剂进行表征。在光解水产氢测试中,LaNiO_3/Mn_(0.2)Cd_(0.8)S异质结光催化剂在5 h的H_2产量达到1 190.3μmol,相较于CdS和Mn_(0.2)Cd_(0.8)S,其H_2产量分别提高了 25倍和10倍。荧光和电化学实验证实,Mn~(2+)的引入能够有效地促进光生载流子的分离,同时LaNiO_3/Mn_(0.2)Cd_(0.8)S之间异质结的构筑能有效地促进光生载流子在界面间的迁移、分离,从而促进其光解水产氢效率和稳定性的提高。结合一系列表征和活性测试结果提出直接Z型光解水反应机理,很好地阐述了其光解水产氢活性和稳定性的增强。     

Partial P-Type Metal Ions Doping Induced Variation of Both Crystal Structure and Oxygen Vacancy Within Cu/SnO2 Metastable Solid Solution Nanofibers for Highly Sensitive C2H2 Sensor

Partial P-type metal ions doping(PPMID) is an alternative method to further enhance the gas sensing performance of N-type metal oxides(NMOs) in contrast to that of P-N metal oxides heterojunctions, but the influences of the introduction of PPMID on the grain size and oxygen vacancies of NMOs have been rarely investigated. Herein, a simple and effective route has been demonstrated to address this problem with Cu²⁺-doped SnO₂ metastable solid solution nanofibers(CSMSSNs) as model and C₂H₂ as target molecule by combining electrospinning and calcination technique. It seems that the introduction of PPMID can also affect crystal structure and oxygen vacancies of NMOs, proven by combining X-ray diffraction(XRD) and X-ray photoelectron spectra(XPS). Thus, PPD, crystal structure and oxygen vacancies have been combined to clarify the enhanced sensing performance of Cu-doped SnO₂ metastable solid solution nanofibers angainst C₂H₂.     

Bi2Fe4O9/g-C3N4/UiO-66三元复合材料的协同光催化作用

通过水热法合成具有协同机制的三元复合材料Bi₂Fe₄O₉/g-C₃N₄/UiO-66,研究表明三元复合光催化剂的催化活性要高于二元材料和纯材料。这主要是由于Bi₂Fe₄O₉更易于和g-C₃N₄结合形成稳定的Z-scheme异质结结构,使三元复合材料增强了可见光响应能力,提高了电子-空穴分离能力,增强了空穴和电子的氧化还原能力。     

基于水滑石前驱体制备ZnCr_2O_4-ZnO复合光催化剂及产氢性能

以研磨水热法合成ZnCr_2O_4-ZnO异质结型光催化剂,对所得样品进行了TG-DTA、XRD、SEM、HRTEM、DRS和N2吸附-脱附表征分析;在模拟太阳光下,以草酸为牺牲剂对样品的光催化产氢活性进行评价,并分别与共沉淀法、尿素回流法和尿素水热法制备的ZnCr_2O_4-ZnO样品进行比较,探讨了异质结型ZnCr_2O_4-ZnO复合光催化剂的产氢机理。结果表明,四种方法制备的Zn-Cr前驱体都具有一定的水滑石结构,经500℃焙烧后,均为球形纳米粒子,但团聚情况各异,比表面积和孔结构参数有较大差别。其中,研磨水热法所得样品ZnCr_2O_4-ZnO粒子均匀,光电流响应强度最大,产氢效率最高,为0.956 mmol/(h·gcat),分别是共沉淀法、尿素回流法和尿素水热法制备样品产氢量的2.3、1.5和3.0倍。     

Microwave-assisted sol-gel synthesis of CeO2–NiO nanocomposite based NO2 gas sensor for selective detection at lower operating temperature

The progress in the development of gas sensors has considerably grown using some novel nanomaterials of metal, metal oxide and composite. In the current study, we intended and evaluated the properties of nanomaterials like CeO₂, NiO, and CeO₂–NiO composite and its application as NO₂ gas sensor. Sensing of low concentration of NO₂ gas at optimum functional temperature was succeeded using CeO₂–NiO nanocomposites (NCs) film. The working temperature ranges in between 100 and 225 ?°C. Highly crystalline nanomaterials (CeO₂, NiO and CeO₂–NiO) have been prepared by applying microwave-assisted sol-gel route. The as-prepared nanomaterials are characterized for their structure, size, morphology and constitution by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray analysis. XRD studies of nanoparticles reveal the formation of nanoscale CeO₂ and NiO with crystallite size 26, 23 ?nm, respectively. Both are having a face centered cubic structure. The nanocomposite (NC) Ce:Ni ?= ?60:40 has crystallite size of 13 ?nm. XRD study of NCs shows assimilation of Ni metal into the ceria and proves physical similarities of two phases. It can be observed from SEM that prepared NC has a porous surface which enables more surface active sites for adsorbing oxygen. The optical properties are measured with the help of UV–Vis. Spectroscopy. Optical band gaps of 3.19, 3.41 and 2.9 ?eV were observed for CeO_2, NiO nanoparticles (NPs) and CeO₂–NiO NC, respectively. Gas sensing properties state that the NC material shows a higher gas response % of 67.34% for NO₂ gas (25 ?ppm) at comparatively low operating temperature (125 ?°C). It gives response time as (～28 ?s) and the recovery (～54 ?s). NiO incorporation in CeO₂ results in a decline of operating temperature of NC and improves the sensing features.     

压力诱导相变原位构建BiVO4/Bi0.6Y0.4VO4型异质结增强光催化全解水性能

光催化完全分解水制氢是一个在粉末颗粒中实现多个串行物理化学步骤的复杂反应过程.这一过程在理论上具有体系简单、成本低、易操作等特点.然而,单步光激发系统中通常存在严重的光生载流子复合,这极大地制约了光催化的整体效率.利用能带结构不同的半导体合理构建异质结催化剂被认为是解决这一难题的重要途径之一.特别是近年来,S型异质结概念的提出为设计异质结结构以及分析不同半导体之间的载流子迁移问题提供了新的思路.本文以小粒径BiVO₄/Bi_0.6Y_0.4VO₄(BYV)为研究对象,首先利用"共沉淀-晶化"的方法制备了BYV固溶体纳米颗粒,随后利用压力诱导固溶体中四方相钒酸铋结构转变为单斜相,从而构建了BiVO₄/Bi_0.6Y_0.4VO₄复合光催化剂.XRD,Raman,HRTEM,HAADF-EDS的结果表明,经过高压后处理的BYV固溶体表面会出现粒径约为5 nm单斜钒酸铋纳米颗粒,实现了原位构建异质结结构.随后载流子动力学的相关表征以及Au选择性光沉积的结果表明,在光照条件下,所构建异质结中的光生电子主要分布在BYV固溶体上,而在表面形成的单斜相钒酸铋颗粒主要起到了类似"空穴"捕获的作用.这种在异质结中的载流子迁移路径符合S型异质结机理.电化学、稳态荧光光谱以及瞬态荧光光谱的表征结果表明,相比于单一固溶体,在S型异质结这种两步激发系统中所存在的载流子迁移路径能够大幅促进光生载流子分离,从而提高了小粒径BYV的光催化完全分解水性能.综上,构建S型异质结是一种解决小粒径光催化剂中载流子分离能力差的有效途径.同时,压力诱导材料晶型转变实现原位构建异质结的制备方法也为提高光生载流子分离效率提供了新的研究思路与机遇.     

原位制备具有增强光催化活性的S型Bi2Se3/g-C3N4光催化剂

光催化氧化是一种应用前景良好的环境治理技术.与絮凝、物理吸附和化学氧化等常见的方法相比,光催化氧化具有环境友好、氧化完全、方便和廉价等优势.特别是可见光光催化氧化,可利用太阳能中占比最高的可见光,在应用中更具优势.因而,探索可见光响应性能优异的光催化剂一直是光催化氧化领域的一个重要研究内容.硒化铋(Bi₂Se₃)是一种带隙(带隙宽度在0.3~1.3 e V)非常窄的半导体,能吸收全部波长范围的可见光和近红外光.此外,Bi₂Se₃还具有独特的金属表面态,其表面具有良好的导电性.这些特性使其在可见光光催化氧化领域具有很大的应用潜力.然而,由于Bi₂Se₃价带位置高,氧化能力很弱,其价带上的空穴在光催化反应中难以被消耗,导致空穴大量累积,并迅速与光生电子复合,大幅降低了Bi₂Se₃的光催化性能.因此,一直以来,Bi₂Se₃很少被用于光催化反应.如何充分利用Bi₂Se₃的光响应优势,制备出性能优异的光催化剂,仍是具有挑战性和吸引力的研究方向.本文采用预先制备的Bi2O3/g-C₃N₄复合物作为前驱体,通过原位转化的方法,将前驱体置于热的Se蒸汽中,使前驱体上的Bi2O3与Se蒸汽反应,完全转化为Bi₂Se₃纳米颗粒,从而制得Bi₂Se₃/g-C₃N₄复合光催化剂(Bi₂Se₃含量约为4 wt%).透射电镜结果表明,所形成的Bi₂Se₃纳米颗粒较均匀地分布在g-C₃N₄表面.表面功函数分析发现,Bi₂Se₃与g-C₃N₄结合后,它们的费米能级分别由原来的-0.55和-0.18 e V变为平衡时的-0.22 e V,可形成指向g-C₃N₄的内建电场,有利于形成梯型(S型)异质结.在此基础上,能级位移、荧光分析、结构计算和反应自由基测试等结果表明,Bi₂Se₃和g-C₃N₄之间形成了S型异质结.在可见光光催化降解苯酚的实验中,所制备的Bi₂Se₃/g-C₃N₄复合物的光催化活性明显优于单一的Bi₂Se₃和g-C₃N₄.结合比表面、孔结构、光吸收和荧光等对比分析,认为Bi₂Se₃/g-C₃N₄的这种S型异质结构在其光催化活性增强中起到了关键作用.在光照条件下,其g-C₃N₄导带中光生电子向Bi₂Se₃的价带迁移,并与光生空穴复合,从而使Bi₂Se₃导带上可保留更多的高活性光生电子参与光催化反应,由此Bi₂Se₃/g-C₃N₄的光催化活性增强.循环性能测试和光还原实验结果表明,所制备的Bi₂Se₃/g-C₃N₄复合光催化剂具有良好的稳定性.本文工作为高可见光吸收的光催化剂制备和性能增强提供了新途径和新视野.     

Crosslinking Super Yellow to produce super OLEDs: Crosslinking with azides enables improved performance

An increasing number of organic light-emitting diodes (OLEDs) is nowadays based on the use of polymers as the emissive material. For this material class in particular, solution-processing of the OLEDs has gained traction in both research and industry. However, in order to access multilayer material systems, orthogonal solvents must be used to prevent dissolution of previously prepared layers. The use of crosslinkers can facilitate this production method by reducing the number of orthogonal solvents needed since insoluble networks are generated. In this work, a novel bisazide crosslinker is employed to insolubilize Super Yellow, a polyphenylene-vinylene emitter. This allows the use of an additional poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine electron blocking layer (EBL) from the same solvent. Devices including the blocking layer show improved efficacies compared to reference devices without the additional EBL, while also maintaining the emission spectrum. Using the upscalable technique of doctor blading, OLEDs were fabricated which showed a particularly noticeable effect of the blocking layer with a nearly twofold increase in luminance and a 56% increase in current efficacy.