Detection of large cluster ions by time-of-flight mass spectrometry with a conversion dynode

A linear time-of-flight mass spectrometer (TOF-MS) has been constructed to measure mass distribution of negatively-charged clusters formed in the hot filament diamond chemical vapor deposition (CVD) process and in the metal evaporation. A conversion dynode made of CsI was employed to enhance detection efficiency of the large clusters greater than 10 000 amu. An atomic peak from the tungsten evaporation was used for the mass calibration of the carbon clusters. The carbon clusters produced in the CVD diamond process was loosely bound so that they were easily fragmented during passage through accelerating electric fields. The mass distribution measured with the TOF-MS system showed much less abundance of large clusters than those measured previously with the energy analyzer and Wien filter.     

Motion of a vortex filament with axial flow in the half space

We consider a nonlinear third order dispersive equation which models the motion of a vortex filament immersed in an incompressible and inviscid fluid occupying the three dimensional half space. We prove the unique solvability of initial–boundary value problems as an attempt to analyze the motion of a tornado.     

冈村枝管藻孢子体的形态和超微结构

从日本冲绳采回枝管藻，用毛细管将成熟多室孢子囊挑出，在试验室条件下培养，可长成孢子体．用光学显微镜和透射电子显微镜观察发现：孢子释放后形成盘状体附着在基质上，念珠状同化丝从盘状体中间分生．同化丝可从中间部位产生分支，多室孢子囊位于部分同化丝的近端部；同化丝大量产生后基部细胞平行排列，中空，形成假薄壁组织，而后孢子体进入伸长生长阶段；在每个盘状体细胞和同化丝细胞中都有多个色素体和线粒体，蛋白核突出于色素体其他部分，类脂体存在于类囊体中；在同化丝的细胞壁上存在缺口；对同化纤毛而言，色素体和线粒体数量少，紧贴细胞膜，质壁分离严重，在细胞壁上存在“通道”．     

Numerical simulations of a filament in a flowing soap film

Experiments concerning the properties of soap films have recently been carried out and these systems have been proposed as experimental versions of theoretical two‐dimensional liquids. A silk filament introduced into a flowing soap film, was seen to demonstrate various stable modes, and these were, namely, a mode in which the filament oscillates and one in which the filament is stationary and aligns with the flow of the liquid. The system could be forced from the oscillatory mode into the non‐ oscillatory mode by varying the length of the filament. In this article we use numerical and computational techniques in order to simulate the strongly coupled behaviour of the filament and the fluid. Preliminary results are presented for the specific case in which the filament is seen to oscillate continuously for the duration of our simulation. We also find that the filament oscillations are strongly suppressed when we reduce the effective length of the filament. We believe that these results are reminiscent of the different oscillatory and non‐oscillatory modes observed in experiment. The numerical solutions show that, in contrast to experiment, vortices are created at the leading edge of the filament and are preferentially grown in the curvature of the filament and are eventually released from the trailing edge of the filament. In a similar manner to oscillating hydrofoils, it seems that the oscillating filaments are in a minimal energy state, extracting sufficient energy from the fluid to oscillate. In comparing numerical and experimental results it is possible that the soap film does have an effect on the fluid flow especially in the boundary layer where surface tension forces are large. Copyright © 2004 John Wiley & Sons, Ltd.     

Characteristics and design procedure of hyperbolic dies

Nozzle profiles capable of generating constant extensional strain rates are termed hyperbolic dies. When used in polymer extrusion, they exhibit greater potential in inducing and retaining polymer molecular orientation than conventional capillary dies. Most mathematical expressions found in the literature involve several processing variables in describing and designing such nozzle profiles. This report reveals that a hyperbolic die profile, although rather complicated, can be expressed with equations in terms of two ordinary geometrical parameters—the exit diameter and the hyperbolic length. This finding greatly simplifies the design procedure of hyperbolic dies. The extensional strain rate of a hyperbolic die can be related to the length-to-diameter ratio for any given exit diameter. Examples of various types of die profiles are presented and their constant extensional strain-rate characteristics are discussed.     

用可移动电流丝方法重建HL-2A等离子体边界的研究

根据Shafranov电流密度矩理论，给出了用可移动电流丝方法重建HL-2A装置等离子体边界的具体计算方法，研究了用可移动电流丝方法(VCF法)重建边界的可行性.VCF法与固定电流丝方法(FCF法)和有限电流元法(FCE法)相比，最大的优点就是用1—3个可移动电流丝就可以准确地重建位置和小半径快速变化的等离子体位形，这正好弥补了FCF法的不足.将可移动电流丝方法和FCF法相结合，可以实现全程等离子体放电的边界实时显示和等离子体的位形控制. 关键词： 可移动电流丝方法 边界识别     

The use of the isotropic orientation factor in fluorescence resonance energy transfer (FRET) studies of the actin filament

A Dale-Eisinger style analysis (R. E. Daleet al., Biophys. J. 26, 161, 1979) is used to produce three-dimensional plots that display the limits on the average orientation factor k ² that is required to calculate molecular distances in F-actin from fluorescence resonance energy transfer measurements. Maxima and minima plots are generated for the transfer of energy from a donor to a single acceptor and for transfer to multiple acceptors that are related by F-actin helical symmetry. The analysis is performed in terms of dipole cone half-angles rather than depolarization factors, in order to facilitate the modeling of the multiple acceptor problem. Calculations are carried out under the restrictive condition of a single electric dipole moment per fluorophore. In addition, both surface and volume averaging of the donor and acceptor dipoles are considered. Comparisons between the plots show that for the multiple acceptor cases with F-actin symmetry, there is a great reduction in the range for maxima and minima limits on k ². The calculations also suggest guidelines for the choice of fluorescence label that will result in an average orientation factor occurring within acceptable limits, i.e., inside the limits for which k ²=2/3 may be employed. Thus, without having detailed knowledge of the mean donor or acceptor dipole relative orientations, the use of k ²=2/3 in radial coordinate studies of F-actin is more than reasonable and is fairly assured of being correct.     

A Remark on the Global Existence of a Third Order Dispersive Flow into Locally Hermitian Symmetric Spaces

We prove time-global existence of solutions to the initial value problem for a third order dispersive flow into compact locally Hermitian symmetric spaces. The equation under consideration generalizes two-sphere-valued completely integrable systems modeling the motion of vortex filament. Unlike one-dimensional Schrödinger maps, our third order equation is not completely integrable under the curvature condition on the target manifold in general. The idea of our proof is to exploit two conservation laws and an “almost conserved quantity” which prevents the formation of a singularity in finite time.     

硅衬底上纳米晶金刚石生长

研究了蚀刻气体对生长在硅衬底上纳米晶金刚石合成的影响.合成方法为热丝化学气相沉积法,衬底温度为550 oC,反应压力为4 kPa. 其中甲烷和氢气分别作为源气体和稀释气体. 氮气、氢气和氨气用作蚀刻气体. 结果表明,仅氢气作为蚀刻气体可获得最佳工艺条件.