π‐Interactions between Cyclic Carbocations and Aromatics Cause Zeolite Deactivation in Methanol‐to‐Hydrocarbon Conversion

The understanding of catalyst deactivation represents one of the major challenges for the methanol‐to‐hydrocarbon (MTH) reaction over acidic zeolites. Here we report the critical role of intermolecular π‐interactions in catalyst deactivation in the MTH reaction on zeolites H‐SSZ‐13 and H‐ZSM‐5. π‐interaction‐induced spatial proximities between cyclopentenyl cations and aromatics in the confined channels and/or cages of zeolites are revealed by two‐dimensional solid‐state NMR spectroscopy. The formation of naphtalene as a precursor to coke species is favored due to the reaction of aromatics with the nearby cyclopentenyl cations and correlates with both acid density and zeolite topology.     

催化燃烧去除VOCs污染物的最新进展

催化燃烧是目前最有效的处理挥发性有机物(VOCs)技术之一. 本文从催化剂活性组分、催化剂载体、有效组分颗粒大小、水蒸汽的影响及催化燃烧反应中的积碳等几个方面, 对近年来催化燃烧处理VOCs的研究进行了总结. 分析表明: 贵金属催化剂的研究主要着重于选择有效的载体和双组分贵金属催化剂; 非贵金属催化剂的研究主要集中在高活性的过渡金属复合氧化物、钙钛矿和尖晶石型等催化剂的研制, 还有这些活性组分粒径大小及载体对催化燃烧VOCs反应活性的影响;此外, 在实际应用中,水蒸汽和催化剂积碳失活等问题对催化燃烧VOCs的反应也有很大影响. 本文的评述将为选择合适的催化燃烧技术处理VOCs污染物提供一定参考.     

辣根过氧化物酶在亲水性离子液体中的活性与稳定性研究

基于辣根过氧化物酶对过氧化氢氧化愈创木酚这个显色反应的催化作用,研究了辣根过氧化物酶在七种亲水性离子液体[C2mim][BF4]、[C4mim][BF4]、[C6mim][BF4]、[C4mim]HSO4、[C4mim]Cl、[C4mim]NO3、[C4mim][CF3CO2]中的活性与稳定性变化.结果表明辣根过氧化物酶在不同离子液体中均有不同程度的失活,辣根过氧化物酶活性随离子液体极性增强而降低.辣根过氧化物酶在含[C4mim]Cl离子液体的介质中,随着温度升高,[C4mim]Cl对辣根过氧化物酶的失活过程起加速作用,离子液体浓度越高,酶的热稳定性越差.紫外-可见光谱研究表明,在含[Cnmim][BF4]、[C4mim]HSO4、[C4mim]Cl、[C4mim]NO3的介质中,辣根过氧化物酶血红素中心最大吸收峰没有发生变化,但吸收值增强,证明离子液体使酶的血红素基团暴露于介质中而增强了吸收;而在含[C4mim][CF3CO2]的介质中,辣根过氧化物酶血红素基团最大吸收峰区发生蓝移,证明有部分血红素基团被离子液体破坏而脱落.     

Synthesis of NMP/RAFT inifers and preparation of block copolymers

Two different initiator/transfer agents (inifers) containing an alkoxyamine and a dithiobenzoate were synthetized and used to trigger out either reversible addition‐fragmentation chain transfer (RAFT) polymerization or nitroxide‐mediated polymerization (NMP). α‐Dithiobenzoate‐ω‐alkoxyamine‐difunctional polymers were produced in both cases which were subsequently used as precursors in the formation of block copolymers. This synthetic approach was applied to N‐isopropylacrylamide (NIPAM) or polyethylene oxide methacrylate (EOMA) to form α,ω‐heterodifunctional homopolymers via RAFT at 60°C which were chain extended with styrene by activating the alkoxyamine moiety at 120°C. Under such temperature conditions, it is proposed that a tandem NMP/RAFT polymerization is initiated producing a simultaneous growth of polystyrene blocks at both chain‐ends. Self‐assembled nanostructures of these amphiphilic block copolymers were evidenced by scanning electron microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Facile preparation of superhydrophobic and oleophobic surfaces via the combination of Cu(0)‐mediated reversible‐deactivation radical polymerization and click chemistry

The fabrication of novel hydrophobic, superhydrophobic, and oleophobic surfaces on glass using nanosilica particles modified with polymer brushes prepared via surface initiated Cu(0)‐mediated reversible‐deactivation radical polymerization was demonstrated. Monomers including n‐butyl acrylate, 2,2,2‐trifluoroethyl methacrylate, and 1,1,1,3,3,3‐hexafluoroisopropyl acrylate were used to synthesize a series of nanosilica–polymer organic/inorganic hybrid materials. Products were analyzed using infrared spectroscopy, thermogravimetric analysis, scanning and transmission electron microscopy. The coated nanosilica showed core–shell structures that contains polymer brushes up to 67 wt %. The application of these particles for modifying surface wettability was examined by covalently attaching them to glass via a recently developed one‐pot “grafting to” methodology using “thio‐bromo click” chemistry. Atomic force microscopy topographic images show up to 25 times increase in roughness of the coated glass compared to blank glass sample. Contact angle measurements showed that nanosilica coated with PBA and PTFEM produced hydrophobic glass surfaces, while a superhydrophobic and oleophobic surface was generated using nanosilica functionalized with PHFIPA. This novel methodology can produce superhydrophobic and oleophobic surfaces in an easy and fast way without the need for tedious and time‐consuming processes, such as layer‐by‐layer deposition, high temperature calcination, and fluorinated oil infusion. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018     

H2S splitting on Cu(110): Insight from combined periodic density functional theory calculations and microkinetic simulation

Practical copper (Cu)‐based catalysts for the water–gas shift (WGS) reaction was long believed to expose a large proportion of Cu(110) planes. In this work, as an important first step toward addressing sulfur poisoning of these catalysts, the detailed mechanism for the splitting of hydrogen sulfide (H₂S) on the open Cu(110) facet has been investigated in the framework of periodic, self‐consistent density functional theory (DFT‐GGA). The microkinetic model based on the first‐principles calculations has also been developed to quantitatively evaluate the two considered decomposition routes for yielding surface atomic sulfur (S*): (1) H₂S → H₂S* → SH* → S* and (2) 2H₂S → 2H₂S* → 2SH* → S* + H₂S* → S* + H₂S. The first pathway proceeding through unimolecular SH* dissociation was identified to be feasible, whereas the second pathway involving bimolecular SH* disproportionation made no contribution to S* formation. The molecular adsorption of H₂S is the slowest elementary step of its full decomposition, being related with the large entropy term of the gas‐phase reactant under realistic reaction conditions. A comparison of thermodynamic and kinetic reactivity between the substrate and the close‐packed Cu(111) surface further shows that a loosely packed facet can promote the S* formation from H₂S on Cu, thus revealing that the reaction process is structure sensitive. The present DFT and microkinetic modeling results provide a reasonably complete picture for the chemistry of H₂S on the Cu(110) surface, which is a necessary basis for the design of new sulfur‐tolerant WGS catalysts. © 2013 Wiley Periodicals, Inc.     

热稳定单原子催化剂的理性构筑:从原子级结构到实际应用

80%以上的工业生产过程涉及催化,如化工生产、能源转换、制药和废物处理等等.催化剂的使用显著提高了生产效率,降低了生产成本,为国民经济、地球环境和人类文明的可持续发展做出了很大贡献.为了满足日益增长的生产需求和最大的经济效益,开发高效、稳定、低成本的新型催化剂已成为当务之急.金属中心负载在载体上的负载型金属催化剂因其较好的催化活性和相对较低的金属用量而受到广泛关注.研究发现,负载型结构可增强传热和传质并增加活性金属中心的分散度,从而影响催化性能.此外,负载金属的颗粒尺寸对催化剂的性能有很大影响.迄今为止,科学家们一直在通过减小金属颗粒尺寸和提高原子利用效率来提高催化剂的活性.原子级尺寸的颗粒通常表现出与大尺寸颗粒显着不同的物理和化学性质,而当活性位点的尺寸缩小到单个原子时,单原子催化剂的概念应运而生.对于单原子催化剂,金属原子中心通过配位被载体中的缺陷锚定,从而调整金属原子的电子云分布.这种配位调整使得单原子催化剂拥有与传统催化剂不同的性能.作为催化领域的新前沿,单原子催化剂已经在许多催化反应中表现出前所未有的活性和选择性.然而,许多报道的单原子催化剂在高温环境或长期催化应用中容易受到奥斯特瓦尔德熟化过程的影响,从而导致催化剂烧结和失活.而烧结的原因在于金属原子和载体之间较弱的相互作用.失活催化剂的再生和回收将大大增加工业生产的时间和经济成本.因此,开发具有优异热稳定性的单原子催化剂以满足工业需求是十分必要的.本综述首先总结了近年来关于热稳定型单原子催化剂合成方法的基础研究,并从原子尺度上分析了这些方法所构建的金属中心的结构形态和配位环境.此外,结合近些年的研究中新的表征技术与理论计算手段解释了热稳定性的来源.重点讨论了热稳定单原子催化剂的实际催化应用.分析了热稳定单原子催化剂在热催化应用中的独特作用机理、并尝试为确定催化过程中真正的活性中心以及通过原子级调控手段进行高活性热稳定单原子催化剂的合成提供理论指导.最后总结了热稳定单原子催化剂发展的主要问题,并简要分析了单原子催化领域的研究挑战和发展前景.     

Cr2O3和CrO3/Cr2O3催化剂的2-氯-1,1,1-三氟乙烷气相氟化反应的活性物种和失活

采用沉淀法和浸渍法制备了2种铬基（Cr₂O₃和CrO₃/Cr₂O₃）催化剂,用于气相氟化2-氯-1,1,1-三氟乙烷合成1,1,1,2-四氟乙烷。研究发现含有低价铬（Cr³⁺）物种的Cr₂O₃催化剂上2-氯-1,1,1-三氟乙烷的稳态转化率为18.5%,而含有高价铬（Cr⁶⁺）物种和低价铬（Cr³⁺）物种的CrO₃/Cr₂O₃催化剂初始转化率达到30.6%,然而存在明显的失活。含有Cr⁶⁺物种的CrO₃/Cr₂O₃催化剂的2-氯-1,1,1-三氟乙烷氟化反应初始TOF值为1.71×10^-4 mol_HCFC-133a·mol_Cr（Ⅵ）^-1·s^-1,高于含有Cr³⁺物种的Cr₂O₃催化剂（4.16×10^-5 mol_HCFC-133a·mol_Cr（Ⅲ）^-1·s^-1）。Cr₂O₃催化剂在氟化反应前后催化剂的物相结构保持不变;而含有高价铬物种的CrO₃/Cr₂O₃催化剂经HF反应后生成了CrO_xF_y活性物种。然而,CrO_xF_y物种在反应中挥发或转化成稳定但无活性的CrF₃,从而导致催化剂失活。     

CoAPO-11分子筛在己烯骨架异构化反应中的应用及失活

 用水热法合成了CoAPO-11分子筛,并考察了温度和空速对分子筛上1-己烯骨架异构化反应的影响. 结果表明,1-己烯转化率以及产物异己烯的选择性和收率均随空速的增加而降低; 而随着温度的升高1-己烯转化率也升高,异己烯的选择性和收率则先增加后减小,在300 ℃附近有一最大值. 另外从分子筛的晶相、孔道尺寸以及酸性的变化等方面探讨了再生后的分子筛催化性能下降的原因.