铕掺杂BaPbO3的EXAFS研究

采用扩展Ｘ射线吸收精细结构方法，研究了铕掺杂ＢａＰｂＯ３多晶粉末中Ｅｕ，Ｐｂ两种原子的近邻结构。Ｅｕ的掺杂，导致八面体中金属Ｐｇ，Ｅｕ的配位数降低。     

Pt羰基簇合物在NaY内的合成机理

利用IR，EXAFS, ~(13)CO同位素交换反应及与NO作用等手段研究了Pt羰基簇合物[Pt_3(CO)_6]~(2-)_n(n＝3,4)在NaY分子筛超笼内的合成机理．在氧化样品Pt~(2+)/NaY上300－373 K的还愿羰基化过程中，首先Pt~(2+)与CO反应生成PtO(CO)物种(波数σ_(CO)＝2110 cm~(-1))，然后聚集成“Pt_3(CO)_6”(σ_(CO)＝2112，1896和1841 cm~(-1))，最后生成深绿色的Pt羰基簇合物Pt_(12)(CO)_(24)]~(2-)/NaY(σ_(CO)＝2080，1824 cm~(-1))．“Pt_3(CO)_6”的羰基在室温下能迅速地与~(13)CO发生交换，而[Pt_3(CO)_6]~(2-)_n(n＝3,4)的羰基与~(13)CO的同位素交换即使在343 K也进行得很慢，室温下，NO能逐步破坏Pt羰基簇合物的层间和层内Pt－Pt键，得到中间物种“Pt_3(CO)_6”和PtO(CO)，同时在气相产生CO_2和N_2O．而由上述两中间物种出发，300－353 K温度下，在CO气氛中的还原羰基化又能可逆地得到原羰基簇合物．     

硅胶担载四核羰基钴催化剂的EXAFS和IR研究

本文以透射法EXAFS和IR等手段研究了四核羰基钴金属簇Co_4(CO)_(10)(PPh)_2担载在SiO_2上以后及用于烯烃醛化反应前后的变化,确定了相应的结构参数并探讨了催化活性与结构的关系。     

MoCo/Y, MoNi/Y氮化物催化剂的结构和CH4+CO2重整反应性能

采用氨气还原法制备了NaY分子筛负载的MoCo/Y、MoNi／Y双组氮化物催化剂，用XRD和EXAFS方法征了样品的结构，并测定了其在CH4＋CO2重整反应中的活性，在氧化态时，MoCo/Y样品中主要存在CoMoO4和Co3O4两种物相，Mo的配位状态接近于CoMoO4，而Co的配位状态更接近于Co3O4，MoNi／Y样品中主要有NiMoO4和NiO两种物相，Mo的配位状态接近于MiMoO4，而Ni的配位状态可能是NiMoO4和NiO两种化合物中Ni配位状态的平均效果，Ni-Mo之间的朴素作用似乎比Co-Mo相对较强，在氮化态时，两种样品中Mo的配位状态较为相似，但即不同于MoO3，也不同于单组分γ－Mo2N.Co和Ni的配位状态都不同于各在氧化态下的状态，且都在相同的位置出现一个新强峰，这似乎表明MoCo和MoNi生成了结构相似的氮化物，在CH4＋CO2重整反应中，氮化态MoCO/Y和MoNi/Y的活性大大超过非负载单组分γ－Mo2N催化剂，其中MoNi/Y的活性相对更好一些，且活性随Ni含量增加而提高。     

离聚体的结构表征 Ⅲ.EXAFS法测定含氟的铜离聚体的精细结构

本文报道了用先进的EXAFS及ESR等方法研究了羧酸型含氟的铜(Ⅱ)离聚体离子微区的内部精细结构,结果表明,铜离聚体的离子微区主要由羧酸根桥键的双核配位结构单元及平面四方形的配位结构单元等聚集而成。在双核配位结构单元中第一层为Cu~(2+)—O配位,配位数为4,配位键键长为1.96A,第二配位层为Gu~(2+)—Cu~(2+)配位,Cu~(2+)—Gu~(2+)间距为2.64A。平面四方形的配位结构单元Cu~(2+)—O的配位数为4,配位键键长为1.96A。共聚物中羧基含量对离聚体的基本配位结构单元和离子微区的精细结构影响较小,但对微区大小有影响。     

Comparing the Atomic Structures of Binary MO2-SiO2 (M = Ti, Zr or Hf) Xerogels

The incorporation of transition-metal oxides into silica can give materials with useful optical, electronic or catalytic properties. For example, ZrO₂-SiO₂ and HfO₂-SiO₂ materials are of interest due to their high dielectric constants. Here we present a comparison of extended X-ray absorption fine structure and small-angle X-ray scattering results for acid-catalysed binary (MO₂) _x (SiO₂)_{1 – x} (M = Ti, Zr or Hf) xerogels, with x up to 0.4 and heat treatments up to 750°C. Detailed observations for TiO₂-SiO₂ and ZrO₂-SiO₂ xerogels provide a basis for interpretation of new results for HfO₂-SiO₂ xerogels. At low concentrations metal atoms are homogeneously incorporated into the silica network. Ti adopts coordinations of 4 or 6, and Zr and Hf both adopt higher coordination of 6 or 7 (the larger coordinations being due to ambient moisture). At higher concentrations, phase separation of metal oxide occurs. Such regions become clearly separated from the silica network for TiO₂, but remain very finely mixed with silica network for ZrO₂ and HfO₂.     

Preparation of ZnO Nanoparticles: Structural Study of the Molecular Precursor

The structure of zinc acetate derived precursor currently used in the sol-gel synthesis of ZnO nanoparticles is described. The reaction products obtained before and after reflux of ethanolic zinc acetate solution have been studied by UV-Vis, photoluminescence, FTIR and EXAFS at the Zn K edge. EXAFS results evidence for both precursor solutions a change from the octahedral coordination sphere of oxygen atoms characteristic of the solid zinc acetate dihydrate compound into a four-fold environment. The EXAFS spectra of precursor solutions can be satisfactorily reproduced using the molecular structure reported for Zn₄O(Ac)₆ (Ac = COOCH₃). UV-Vis and FTIR measurements are also in agreement with the formation of this oligomeric precursor. The structural modification is more pronounced after reflux at 80°C, because the increase of the Zn₄O(Ac)₆ amount and the formation of nearly 3.0 nm sized ZnO nanoparticle.     

The synthesis and characterisation of ferromagnetic CaMn2O4 nanowires.

The synthesis of marokite CaMn(2)O(4) nanowires using a hydrothermal method is reported. Transmission electron microscopy and electron diffraction measurements show that the nanowires are polycrystalline in nature with diameters between 10 and 20 nm and lengths ranging from approximately 100 to 500 nm. Most interestingly, in contrast with the bulk material, magnetization measurements show that these nanowires exhibit ferromagnetic ordering with a Curie temperature (T(C)) of approximately 40 K.     

CuO-BaO/SiO2催化剂的结构表征

以XRD、XPS和EXAFS手段对CuO－BaO／Sic2催化剂及其还原态的结构进行了研究．结果表明，在CuO－BaO／SiO2体系中铜和钡都是以氧化态的形式存在，超细SiO2载体对所负载的CuO的结构有影响．随着样品负载量的逐渐降低，Cu－O和Cu－Cu睡的健长和配位数逐渐征小，而且低载量样品的健长和配位数减小的幅度最大．在总负载量＞13．39％的样品中，CuO以晶相的形式存在；总负载量＜13．39％的样品中，CUO呈现单层分布的高分出状态．还原态样品中钢以本价铜的形式存在，随负载量的降低，还原态Cu－Cu健的镇长和配位数也分别呈现出逐渐减小的趋势．还原态中心铜原子在催化剂表面的分布状态基本上保持了氧化态催化剂中CuO物相的分市状态．     

Transition Metal Atom Sites in Ternary ZrO2-TiO2-SiO2 Xerogels

There has been much work on the binary TiO₂-SiO₂ and ZrO₂-SiO₂ materials prepared by sol-gel because of the beneficial properties resulting from incorporation of Ti and Zr. In contrast the ternary TiO₂-ZrO₂-SiO₂ xerogels have been relatively little studied. We report the results of a study of those xerogels having Zr:Ti:Si ratios of 5:15:80, 10:10:80 and 15:5:80 heated to 750°C and to 1000°C. The study includes X-ray diffraction, small angle X-ray scattering, X-ray absorption spectroscopy at Ti and Zr K-edges, and ¹⁷O MAS-NMR. The study has benefited from close comparison with similar previous studies of the binary systems. The metal atoms in the ternary systems are shown to be predominantly homogeneously mixed in the silica network, as observed for the respective binary systems. The clear exception is for the sample with a minority of Zr, which after heat treatment at 750°C shows the presence of phase separation attributed to the formation of an amorphous precursor of ZrTiO₄; at 1000°C this phase crystallises. In samples with higher Zr content the crystallisation of a ZrO₂ tetragonal phase was observed. The data obtained illustrate well the strength of a research methodology in which a common batch of samples is studied using a coherent suite of modern structural probes.