气相色谱法监测氧化钙催化制备生物柴油的反应进度

建立了一种通过检测氧化钙催化制备生物柴油过程中产生的甘油来监测反应进度的方法. 在反应样品中加入草酸、硫酸溶液, 除掉由催化剂引入的钙离子, 释放与氧化钙结合的甘油, 利用气相色谱方法检测甘油的含量. 讨论了实验中加入草酸、硫酸的目的及对结果的影响. 实验结果表明, 此法可用于氧化钙催化制备生物柴油过程中反应进度监测的研究.     

甲醇／丙烷在ZSM－5分子筛上偶合转化过程的研究

考察了甲醇／低碳烷烃在ＺＳＭ－５分子筛上偶合转化为芳烃和低碳烯烃的反应过程。对特定的催化体系，存在一最佳原料配比，使反应的热效应近似为零。偶合转化时甲醇完全转化，低碳烷烃的转化率低；不同催化剂上偶合转化产物分布差别极大，与ＨＺＳＭ－５相比，Ｇａ改性后可获得较高的芳烃和低碳烯烃收率。     

Solar-Driven Artificial Carbon Cycle

Constituting the artificial carbon cycle,for example,through recycling CO₂ and converting CH₄ to value-added fuels and chemicals with solar energy,offers a sustainable future for humankind to tackle the global environmental issues and energy crisis.However,significant bottlenecks remain in such photocatalytic conversion,mainly related to the reaction activity and product selectivity.Herein,we share our efforts and systematic research progress on addressing the double bottlenecks for achieving solar-driven artificial carbon cycle,with specifically focusing on the photocatalytic CO₂ and CH₄ conversion.We further elucidate the common fundamentals behind various designed photocatalytic materials systems.Toward future development,we highlight the opportunities and challenges in the research field.     

重氮树脂-聚(4-羧酸苯基)乙炔自组装膜与光电转换

近年来 ,自组装及其形成的多层复合膜已经在导电、生物传感器及非线性光学等领域得到深入研究 ,特别是以聚阴离子与聚阳离子相互作用的静电自组装研究更为深入 .这一技术制备方法简单 ,无需特别的设备 ,对膜层厚度能随意调控 ,并以水作为介质 ,对环境无害 [1～ 3] .共轭高分子 (如聚苯胺、聚吡咯及聚苯亚乙烯等 )通过自组装形成共轭高分子膜 ,对制备具有导电、光电和传输等功能的薄膜半导体器件具有重要意义 .聚乙炔类是最早被发现且理论与应用研究最多的一类共轭高分子材料[4 ,5] .本文以聚 ( 4 -羧酸苯基 )乙炔 ( PCPA)为聚阴离子 ,以重…     

黑腔靶X光转换,输运的定量测量

为了测量黑腔靶X光引光效率、转换效率,我们设计了相应的分解靶(泄漏靶)实验,1989～1992年在″神光″装置上共进行了四次漏靶分解实验,利用灵敏度作了绝对标定的平响应X光二极管对漏靶注入孔、引光孔流出的X光角分布进行了测量,测出了x光角分布,得到了黑腔靶X光转换效率为50％～60％,引光效率约6％,为以后辐射驱动内爆研究的理论计算和靶的优化设计提供了重要的数据。     

Large-scale synthesis of tube-like ZnS and cable-like ZnS-ZnO arrays: Preparation through the sulfuration conversion from ZnO arrays via a simple chemical solution route

Arrayed structures are desirable for many applications, but the fabrication of many material arrays remains a significant challenge. As a prominent II-VI semiconductor, large-scale arrayed ZnS structure has not been easily fabricated. Here, we introduce a simple structure conversion route for the synthesis of novel arrayed structures, and large-scale tube-like ZnS structure arrays and cable-like ZnS-ZnO composite arrays were successfully prepared through sulfuration conversion from arrayed rod-like ZnO structure based on a hydrothermal method at low temperature. XRD, EDS, SEM, TEM and PL are used to confirm the formation of the novel arrayed structure and trace the conversion process. The results show that the conversion ratio can be conveniently tailored by the reaction time, and the PL properties of the obtained materials can be adjusted through the conversion ratio. Especially, the cable-like structure holds the PL properties of both ZnO and ZnS structures. This simple solution method can be further extended to the preparation of other semiconductor sulfide and selenide, and can amplify the application field of large-scale arrays of semiconductors.     

水滑石焙烧产物Mg（Al）O为载体的Pt催化剂的正己烷临氢反应性能

制备了以水滑石焙烧产物－Ｍｇ－Ａｌ复合氧化物为载体的Ｐｔ催化剂，并考察了它在氢存在下的烃类转化反应性能，表明此类催化剂具有比一般的Ｐｔ／Ａｌ２Ｏ３更好的正己烷脱氢环化和异构化反应活性和选择性，更低的氢解反应活性。分别制备了以Ｈ２ＰｔＣｌ６、Ｐｔ（ＮＨ３）４（ＯＨ）２和Ｐｔ（ＮＨ３）４Ｃｌ２为浸渍剂的催化剂，其中以用Ｐｔ（ＮＨ３）４Ｃｌ２和Ｐｔ（ＮＨ３）４（ＯＨ）２制备的催化剂的脱氢环化反应和异构化     

The use of 1H NMR microscopy to study proton-exchange membrane fuel cells.

To understand proton-exchange membrane fuel cells (PEMFCs) better, researchers have used several techniques to visualize their internal operation. This Concept outlines the advantages of using 1H NMR microscopy, that is, magnetic resonance imaging, to monitor the distribution of water in a working PEMFC. We describe what a PEMFC is, how it operates, and why monitoring water distribution in a fuel cell is important. We will focus on our experience in constructing PEMFCs, and demonstrate how 1H NMR microscopy is used to observe the water distribution throughout an operating hydrogen PEMFC. Research in this area is briefly reviewed, followed by some comments regarding challenges and anticipated future developments.     

Enhancement of photocurrent generation by honeycomb structures in organic thin films.

A light-emitting poly (distyryldimethylbenzene-co-triethylene glycol) rod-coil block copolymer was used to fabricate films with three-dimensionally ordered honeycomb structures by the breath-figure method. Photocurrent generation and photovoltaic performance are studied, and the dependence of photocurrent on applied electric field is investigated. Introducing the ordered porous structure significantly improves the photoelectric conversion behavior, because porous structures not only enhance the light-harvesting efficiency but also benefit charge separation and charge transfer. This phenomenon may have great prospects for enhancing the photovoltaic behavior of organic thin-film devices.     

SAPO-34分子筛骨架稳定性的研究

利用差热分析，原位ＸＲＤ技术，高温条件下的焙烧和水蒸气处理并关联其催化性能变化，研究了ＳＡＰＯ－３４分子筛的热及水热稳定性，差热分析结果表明，ＳＡＰＯ－３４的骨架破坏温度高于１３００Ｋ，原位ＸＲＤ跟踪研究证实，ＳＡＰＯ－３４分子筛原粉在高温焙烧以除掉有机胺及随后的降温过程中无明显的骨架破坏；而焙烧型ＳＡＰＯ－３４在空气中放置一定时间后，水分子吸附微孔中明业降低样品的ＸＲＤ峰强度，且降低幅度随放置时