Stable isotope dilution assay for the accurate determination of tricaine in fish samples by HPLC–MS–MS

Tricaine methanesulfonate is one of most commonly used anesthetics in fish during blood sampling, artificial propagation and long‐distance transportation. In this study, an accurate method for the quantitative determination of tricaine in fish samples by a stable isotope dilution assay coupled with high‐performance liquid chromatography–triple quadrupole mass spectrometry was developed. Tricaine‐D₅ was synthesized and used as an isotopically labeled internal standard for the determination of tricaine. The analytical performance of the method was validated for tricaine determination in marine fish and freshwater fish. The determination of tricaine was linear in the range of 2.0–200.0 μg L^?1. The limit of detection and limit of quantitation for fish muscle tissues were 1.0 and 4.0 μg kg^?1, respectively. Good recoveries were obtained in the range of 92.08–97.50%. The inter‐ and intra‐assay relative standard deviations (RSD values) were investigated, and the values were 0.39–3.01 and 0.85–2.77%, respectively. The values of CCα and CCβ were 10.21–10.43 and 10.42–10.87 μg kg^?1, respectively. The clearance of MS‐222 from grass carp was further studied using our method. The results demonstrate that MS‐222 could be well absorbed and rapidly eliminated after bath administration.     

The assay of pterostilbene in spiked matrices by liquid chromatography tandem mass spectrometry and isotope dilution method

Pterostilbene (trans‐3,5‐dimethoxy‐4‐hydroxystilbene) is an active component found in several plant species, exhibiting important pharmacological properties. A new and reliable method of assaying this phyto compound in various matrices is presented; the assay is based on (1) the selectivity of liquid chromatography (LC) hyphenated with electrospray ionisation (ESI), (2) the specificity of a two‐step mass spectrometric analysis (MS/MS) and (3) the accuracy of the isotope dilution method. The labelled analogue may be conveniently synthesised in a few steps. The sensitivity of the method is confirmed by the very low limit of detection (LOD) and limit of quantitation (LOQ) values achieved in the assay of pterostilbene in two distinct fortified matrices, and is further supported by the observed accuracy values. Copyright © 2010 John Wiley & Sons, Ltd.     

Cure Kinetics of Poly(acrylonitrile-butadiene-styrene) Modified Epoxy–Amine System

The cure kinetics of epoxy based on the diglycidyl ether of bisphenol A (DGEBA) modified with different amounts of poly(acrylonitrile-butadiene-styrene) (ABS) and cured with 4,4′-diaminodiphenylsulfone (DDS) was investigated by employing differential scanning calorimetry (DSC). The curing reaction was followed by using an isothermal approach over the temperature range 150–180°C. The amount of ABS in the blends was 3.6, 6.9, 10 and 12.9 wt%. Blending of ABS in the epoxy monomer did not change the reaction mechanism of the epoxy network formation, but the reaction rate seems to be decreased with the addition of the thermoplastic. A phenomenological kinetic model was used for kinetic analysis. Activation energies and kinetic parameters were determined by fitting the kinetic model with experimental data. Diffusion control was incorporated to describe the cure in the latter stages, predicting the cure kinetics over the whole range of conversion. The reaction rates for the epoxy blends were found to be lower than that of the neat epoxy. The reaction rates decreased when the ABS contents was increased, due to the dilution effect caused by the ABS on the epoxy/amine reaction mixture.     

粮谷中8种痕量真菌毒素的定量分析方法

建立了大米、小麦和大豆中黄曲霉毒素B1、黄曲霉毒素B2、黄曲霉毒素G1、黄曲霉毒素G2、伏马毒素B1、伏马毒素B2、柄曲霉素和异烟棒曲霉素C 8种真菌毒素的高效液相色谱-串联质谱(HPLC-MS/MS)分析方法。样品加入正己烷去除油脂,用60%乙腈振荡液液分配提取,取乙腈水层过滤膜后分析。在电喷雾电离(ESI)正离子模式下采用多反应监测(MRM)进行测定。定量方法采用同位素内标稀释法,8种真菌毒素在各自浓度范围内线性关系良好,线性系数均不低于0.997 0。空白样品的加标回收率为77%～123%,相对标准偏差(RSD)为0.6%～13.3%。该方法操作简单、灵敏度高,可用于粮谷中真菌毒素的检测。     

Ultra high performance liquid chromatography-quadrupole-time of flight analysis for the identification and the determination of resveratrol and its metabolites in mouse plasma

Resveratrol is a polyphenol that has numerous interesting biological properties, but, per os, it is quickly metabolized. Some of its metabolites are more concentrated than resveratrol, may have greater biological activities, and may act as a kind of store for resveratrol. Thus, to understand the biological impact of resveratrol on a physiological system, it is crucial to simultaneously analyze resveratrol and its metabolites in plasma. This study presents an analytical method based on UHPLC-Q-TOF mass spectrometry for the quantification of resveratrol and of its most common hydrophilic metabolites. The use of ¹³C- and D-labeled standards specific to each molecule led to a linear calibration curve on a larger concentration range than described previously. The use of high resolution mass spectrometry in the full scan mode enabled simultaneous identification and quantification of some hydrophilic metabolites not previously described in mice. In addition, UHPLC separation, allowing run times lower than 10 min, can be used in studies that requiring analysis of many samples.     

Interfacial Behavior,Structure, and Thermodynamics of Water in Oil Microemulsion Formation in Relation to the Variation of Surfactant Head Group and Cosurfactant

Interfacial behavior, structural, and thermodynamic parameters in relation to the formation of water-in-oil (w/o) microemulsion (μE) with varied surfactant head groups and cosurfactants have been evaluated through dilution technique at different temperature and [water]/[surfactant] mole ratio. Dodecyltrimethylammonium bromide (DTAB), sodium dodecylsulphate (SDS), and polyoxyethylene sorbitan monolaurate (Tween-20) were used as surfactants and n-butanol and n-pentanol were used as cosurfactants. Distribution of cosurfactants between bulk oil and the interface using fixed amount of surfactant at varied [water]/[surfactant] mole ratio and temperature has been studied to evaluate thermodynamic parameters. Associated structural parameters, such as droplet dimension and aggregation number of surfactant and cosurfactant at the droplet interface, have also been evaluated. Spontaneity of the μE formation followed the order DTAB>SDS>Tween-20 for both butanol and pentanol in the studied range of temperature. Correlations of the results in terms of the evaluated physicochemical parameters have been attempted.     

Elution behaviour and environmental impact of heavy metals and rare-earth elements from volcanic ashes of Mt. Oyama,Miyake Island

To obtain information on the environmental impact of materials eluted from volcanic ashes of Mt. Oyama, Miyake Island, which erupted in July 2000, the dissolution behaviours of heavy metals and rare-earth elements from the volcanic ashes were examined. The most important characteristic of the Mt. Oyama eruption is that sulphur dioxide (SO₂) gas has been continuously released, and all persons living on Miyake Island have been required to evacuate. To estimate in terms of the volcanic eruption using SO₂ gas, the ash nature in Mt. Usu, Hokkaido, was also examined and compared with that in Mt. Oyama. When rain water mixed the ashes, the water from the ashes of Mt. Oyama became acidic because of the sulphuric acid. Therefore, SO₂ gas in Mt. Oyama can accelerate the dissolution of protons and heavy metals in the ashes, whereas the rain water in Mt. Usu was not acidic and the dissolution of the heavy metals was not so evident compared with that in the case of Mt. Oyama. With this sulphuric acid, heavy metals such as As, Cd, Pb and Hg in the ashes in Mt. Oyama easily dissolved owing to the low pH. The ashes in Mt. Oyama had been released for eight years and the amount of fallen ashes was estimated to be 33 billion tons. The weights of the harmful heavy metals in the volcanic ashes, such as As, Cd, Pb and Hg, were estimated to be 3.8?×?10², 1.3?×?10³, 1.1?×?10³ and 29?kg, respectively, and these heavy metals were dissolved and diluted in seawater. Therefore, the concentration and species (chemical form) of these metals should be carefully monitored in the future. Moreover, SO₂ gas, which has a direct effect on human health and has been monitored continuously, causes other effects, such as facilitation of metal ion elution and rock aeration.     

Application of a new focused microwave technology with species-specific isotope dilution analysis for the quantitative extraction of organometallic contaminants in solid environmental matrices

A new self-tuning single-mode-focused microwave technology has been evaluated in this work to perform the quantitative routine extraction of organometallic species from solid matrices of environmental interest. Species-specific isotope dilution analysis has been employed to better investigate the real influence of the microwave-assisted extractions on the final results. The advantages of such methodology in comparison with other established microwave units for the routine speciation analysis of organomercury and organotin compounds are discussed (such as the capability of using disposable glass vials, a self-tuning mode to provide an accurate control of the temperature and pressure inside of the vials, and the possibility of performing automated sequence of extractions with low sample size). The results obtained in this work demonstrated that such technology provides a fast and reliable quantitative extraction of the organometallic species in a wide range of extraction conditions even when the multi-elemental (Sn and Hg) species-specific determination is carried out.     

18O同位素标记定量肽段串联体蛋白质结合同位素稀释-多反应监测质谱的蛋白质绝对定量新方法

建立了定量肽段串联体蛋白质(concatamers of Q peptides, QconCATs)结合¹⁸O同位素标记-多反应监测质谱的蛋白质绝对定量新方法。首先对QconCAT重组蛋白质进行了纯度表征,十二烷基硫酸钠-聚丙烯酰胺凝胶电泳(SDS-PAGE)表征结果表明重组蛋白质的纯度在99%以上,相对分子质量约为63.4 kDa。对QconCAT重组蛋白质酶切后的肽段混合物进行质谱分析,并经pFind和pLabel软件处理,验证了目标肽段。还考察了QconCAT重组蛋白质的酶切效率和¹⁸O标记效率,并对QconCAT蛋白质结合¹⁸O标记-同位素稀释-多反应监测质谱方法进行了评价。实验结果表明,采用该方法对腾冲嗜热厌氧菌(Thermoanaerobacter tengcongensis, TTE)中选定蛋白质的肽段进行绝对含量测定时,相对标准偏差小于20%,准确度较高,说明该方法可用于复杂生物样本中蛋白质的绝对定量。更重要的是所建方法不仅解决了细胞培养氨基酸稳定同位素标记(SILAC)技术的重标试剂价格昂贵的问题,也为定量蛋白质组学提供了一种新的方法。     

A Dilute and Shoot Strategy for Determining Alternaria Toxins in Tomato-Based Samples and in Different Flours Using LC-IDMS Separation

Alternaria toxins are emerging mycotoxins whose regulation and standardization are in progress by the European Commission and the European Committee for Standardization. This paper describes a dilute and shoot approach to determine five Alternaria toxins in selected food samples using liquid chromatography–tandem mass spectrometry (LC-MS/MS). The strategy involves sample extraction with acidified aqueous methanol, followed by a solvent change accomplished via sample evaporation and reconstitution. The quantification is based on isotope dilution, applying all corresponding isotopically labeled internal standards to compensate possible matrix effects of the analysis. The main advantages of the present method over other existing methods includes simple and effective sample preparation, as well as detection with high sensitivity. The five-fold sample dilution can decrease matrix effects, which were evaluated with both external and internal standard methods. The results demonstrated a limit of quantification lower than 1.0 µg/kg for all five analytes for the first time. The newly presented method showed acceptable accuracy (52.7–111%) when analyzing naturally contaminated and spiked standard samples at the described levels. The method was validated for tomato-based and flour samples (wheat, rye, and maize). The absolute recovery ranged from 66.7% to 91.6% (RSD < 10%). The developed method could be an alternative approach for those laboratories that exclude sample cleanup and pre-concentration of state-of-the-art instruments with enhanced sensitivity.