Measurement of labile Cu in soil using stable isotope dilution and isotope ratio analysis by ICP-MS

Isotope dilution is a useful technique to measure the labile metal pool, which is the amount of metal in soil in rapid equilibrium (<7 days) with the soil solution. This is normally performed by equilibrating soil with a metal isotope, and sampling the labile metal pool by using an extraction (E value), or by growing plants (L value). For Cu, this procedure is problematic for E values, and impossible for L values, due to the short half-life of the ⁶⁴Cu radioisotope (12.4 h), which makes access and handling very difficult. We therefore developed a technique using enriched ⁶⁵Cu stable isotope and measurement of ⁶³Cu/⁶⁵Cu ratios by quadrupole inductively coupled plasma mass spectrometry (ICP-MS) to measure labile pools of Cu in soils using E value techniques. Mass spectral interferences in detection of ⁶³Cu/⁶⁵Cu ratios in soil extracts were found to be minimal. Isotope ratios determined by quadrupole ICP-MS compared well to those determined by high-resolution (magnetic sector) ICP-MS. E values determined using the stable isotope technique compared well to those determined using the radioisotope for both uncontaminated and Cu-contaminated soils.     

Interactions between terminally substituted amino acids in an aqueous and a non-aqueous environment. Enthalpic interaction coefficients in water and in N,N-dimethylformamide at 25°C

Enthalpies of dilution of the N-acetyl amides of glycine, L-alanine, L-valine, L-leucine, and L-phenylalanine, dissolved in N,N-dimethylformamide (DMF) as a solvent have been measured at 25°C. The results obtained have been analyzed to give the enthalpic interaction (or virial) coefficients of the solutes and these are compared with information previously obtained in aqueous systems. There are marked differences in the interaction properties in the two solvents and, while the additivity approach of Savage and Wood is applicable to the solutes in water it is not suitable for representing the interactions in DMF. A correlation is presented between the enthalpic second virial coefficients in DMF and the propensity of side-chains to be in proximity in globular proteins.     

Enthalpies of dilution of electrolyte solutions by flow microcalorimetry

The enthalpies of dilution of NaCl, Me₄NBr, andn-Bu₄NBr were measured in water at 25°C with a new flow microcalorimeter. The data were analyzed with a polynomial equation, and the derived relative apparent molal enthalpies _L are in good agreement with literature values. Provided care is taken that mixing is complete, flow calorimeters are as reliable and much less time-consuming than cell-type instruments for enthalpies of dilution measurements.     

高效液相色谱分离与质谱稳定同位素稀释法联合测定地质样品中钐及钕

本文报道了用高效液相色谱分离,制取高纯度的Sm及Nd。再与质谱稳定同位素稀释法联合测定几种岩石矿物中的Sm与Nd。     

Automatic flow procedure for the determination of glycerol in wine using enzymatic reaction and spectrophotometry

An automatic flow procedure for the determination of glycerol in wines by employing a flow system based on multicommutation and enzymatic reaction is described. Glycerol dehydrogenase was immobilized on aminopropyl glass beads and packed into a column that was coupled to the flow system. The NADH produced by the enzymatic reaction was monitored by spectrophotometry at 340 nm and its radiation absorption presented a relationship with glycerol concentration. The system manifold comprised a set of three-way solenoid valves controlled by a microcomputer, which was furnished with electronic interfaces and runs a software that was designed to carry out on-line sample dilution, reagent addition, and data acquisition. The procedure allows the determination of glycerol in wine samples without any prior pretreatment. The procedure presented as profitable features a linear response range between 2.0 and 10.0 g l⁻¹ glycerol (R=0.998), a detection limit of 0.006 g l⁻¹ glycerol, a relative standard deviation of 1.8% (n=14) for a typical wine sample presenting 5.3 g l⁻¹ glycerol, a sampling throughput of 33 determinations per hour, and a NAD⁺ consumption of 0.8 mg per determination. The results were compared with those obtained using a reference method and no significant difference at 90% confidence level was observed.     

Performance of quantitative analyses by liquid chromatography–electrospray ionisation tandem mass spectrometry: from external calibration to isotopomer-based exact matching

Liquid chromatography–tandem mass spectrometry (LC-MS/MS) is a versatile coupling system which combines both selectivity and sensitivity and certainty. Hence, it is generally considered as the most reliable technique to quantify chemical compounds in complex matrices. In the present paper, we evaluate the performance of LC-MS/MS methods for the quantification of 3-nitrotyrosine in human urine in order to point out its dependence on the design of the quantification method, and emphasize the role of matrix effects in the performance. We compare external and internal calibrations, isotope dilution and isotopomer-based exact matching. The role of both sample preparation and multiple transitions monitoring is particularly addressed.     

Retrieval and chaos in extremely dilutedQ-Ising neural networks

Using a probabilistic approach, the deterministic and the stochastic parallel dynamics of aQ-Ising neural network are studied at finiteQ and in the limitQ. Exact evolution equations are presented for the first time-step. These formulas constitute recursion relations for the parallel dynamics of the extremely diluted asymmetric versions of these networks. An explicit analysis of the retrieval properties is carried out in terms of the gain parameter, the loading capacity, and the temperature. The results for theQ network are compared with those for theQ=3 andQ=4 models. Possible chaotic microscopic behavior is studied using the time evolution of the distance between two network configurations. For arbitrary finiteQ the retrieval regime is always chaotic. In the limitQ the network exhibits a dynamical transition toward chaos.     

血清中葡萄糖含量CCQM-K11.1国际比对

研究利用同位素稀释质谱法测定血清中的葡萄糖含量，并利用该方法参加国际物质量咨询委员会（CCQM）2005年组织的关键比对CCQM—K11．1，我国国家标准物质研究中心（NRCCRM）的测定结果与韩国（KRISS）和墨西哥（CENAM）的测定结果非常接近，日本（NMIJ）的测定结果离群偏高。     

Enthalpic interaction coefficients of formamides dissolved in N,N-dimethylformamide

Enthalpies of dilution of formamide, N-methylformamide, N-ethylformamide, N-propylformamide, N-butylformamide, N-pentylformamide, N,N-diethyl-formamide, N,N-dipropylformamide, N,N-dibutylformamide, and N,N-dipentyl-formamide dissolved in N,N-dimethylformamide as solvent have been measured calorimetrically at 25°C. The results are interpreted in terms of the McMillan-Mayer theory. Enthalpic interaction parameters are obtained for pairs, triplets, and in some cases, quadruplets of solute molecules. In general, the enthalpic pair interaction coefficients are negative, whereas the triplet coefficients are positive. The interaction enthalpies are positive only for N-methylformamide and formamide. The magnitudes of the enthalpic pair and triplet interaction coefficients increase with increasing number of C atoms in the N-alkyl groups. The results for the formamides presented in this paper are compared with those for corresponding acetamides published earlier. Although the trends are comparable, distinct differences are observed. The contribution of the -CH₃ group at the CO side of the dialkylacetamides to the enthalpic interaction coefficients appears to be negligible. The same is true for -CH₂ groups at the NH side of a number of amides and related compounds. The enthalpic pair interaction coefficients of the mono-N-alkylsubstituted formamides show a shift of about 100 J-kg-mol^–2 as compared with isomeric N-alkylacetamides. This is discussed in terms of the difference in proton donating and accepting ability of several types of amide molecules. It is concluded that substitution effects should be incorporated in additivity models for these type of systems.     

Trace lead measurement and on-line removal of matrix interference in seawater by isotope dilution coupled with flow injection and ICP-MS

Isotope dilution analysis method coupled with flow injection and inductively coupled plasma mass spectrometry (ID-FI-ICP-MS), enabled trace lead concentration in seawater to be determined and the high salt concentration in the matrix, such as Na⁺, Ca²⁺ and Mg²⁺, to be removed on-line. The operational parameters of the FI system including pH for the chelating reaction, concentration of 8-hydroxyquinoline-5-sulfonic acid (8-HQS), sample loading time and injection speed, washing time and speed, eluting acid concentration and eluting speed, and instrumental parameters for ICP-MS were optimized and selected. Accurate results could be achieved because the isotope ratios required can be precisely measured in the range of the eluting peak by means of ID-FI-ICP-MS. The 3σ detection limit was 0.204 ng ml⁻¹. The trace lead concentration of seawater in south Xiamen, China was 0.988 ± 0.039 ng ml⁻¹. The recoveries of spiked Pb standard in seawater and standard reference water (GBW 08607) were 97.9 and 101.0%, respectively, with a relative standard deviation of 0.98%. This method can be used to determine trace lead concentration in high salt matrix samples, and is especially useful when the eluting peaks do not have a Gaussian-distribution.