数控裁剪机切割刀壳体振动噪声预测分析*

高频往复式切割刀是柔性材料数控裁剪机的核心部件。该文对切割刀壳体的振动噪声改进措施进行研究。首先对切割刀进行刚体动力学分析,获取其所受动载荷情况,并通过数值计算验证了切割刀刚体动力学模型的可靠性。其次,基于有限元法获取切割刀壳体模态特性,并通过锤击激振实验验证了有限元模型的准确性。然后基于模态仿真结果进行谐响应分析,将计算得到的频域动载荷施加至切割刀壳体各螺栓固定处,获取结构加速度响应频谱,结合振动响应结果,对壳体进行声固耦合分析,并进行实验对比,验证了分析方法的准确性。最后,计算不同的阻尼措施对壳体噪声辐射的影响,为切割刀的减振降噪提供参考。     

A Coupling Framework for Multi-Domain Modelling and Multi-Physics Simulations

This paper describes a coupling framework for parallel execution of different solvers for multi-physics and multi-domain simulations with an arbitrary number of adjacent zones connected by different physical or overlapping interfaces. The coupling architecture is based on the execution of several instances of the same coupling code and relies on the use of smart edges (i.e., separate processes) dedicated to managing the exchange of information between two adjacent regions. The collection of solvers and coupling sessions forms a flexible and modular system, where the data exchange is handled by independent servers that are dedicated to a single interface connecting two solvers’ sessions. Accuracy and performance of the strategy is considered for turbomachinery applications involving Conjugate Heat Transfer (CHT) analysis and Sliding Plane (SP) interfaces.     

Configuration interaction study on low-lying states of AlCl molecule

High-level ab initio calculations of the Λ–S states for aluminum monoiodide(Al Cl) molecule are performed by utilizing the explicitly correlated multireference configuration interaction(MRCI-F12) method. The Davidson correction and scalar relativistic correction are investigated in the calculations. Based on the calculation by the MRCI-F12 method, the spin–orbit coupling(SOC) effect is investigated with the state-interacting technique. The adiabatic potential energy curves(PECs) of the 13 Λ–S states and 24 Ω states are calculated. The spectroscopic constants of bound states are determined,which are in accordance with the results of the available experimental and theoretical studies. Finally, the transition properties of 0~+(2)–X0~+, 1(1)–X0~+, and 1(2)–X0~+ transitions are predicted, including the transition dipole moments(TDMs),Franck–Condon factors(FCFs), and the spontaneous radiative lifetimes.     

Numerical simulation and experimental validation of multiphysics field coupling mechanisms for a high power ICP wind tunnel

We take the established inductively coupled plasma(ICP) wind tunnel as a research object to investigate the thermal protection system of re-entry vehicles. A 1.2-MW high power ICP wind tunnel is studied through numerical simulation and experimental validation. The distribution characteristics and interaction mechanism of the flow field and electromagnetic field of the ICP wind tunnel are investigated using the multi-field coupling method of flow, electromagnetic, chemical, and thermodynamic field. The accuracy of the numerical simulation is validated by comparing the experimental results with the simulation results. Thereafter, the wind tunnel pressure, air velocity, electron density, Joule heating rate, Lorentz force, and electric field intensity obtained using the simulation are analyzed and discussed. The results indicate that for the 1.2-MW ICP wind tunnel, the maximum values of temperature, pressure, electron number density, and other parameters are observed during coil heating. The influence of the radial Lorentz force on the momentum transfer is stronger than that of the axial Lorentz force. The electron number density at the central axis and the amplitude and position of the Joule heating rate are affected by the radial Lorentz force. Moreover, the plasma in the wind tunnel is constantly in the subsonic flow state, and a strong eddy flow is easily generated at the inlet of the wind tunnel.     

Spinor F=1 Bose–Einstein condensates loaded in two types of radially-periodic potentials with spin–orbit coupling

We consider two-dimensional spinor F = 1 Bose–Einstein condensates in two types of radially-periodic potentials with spin–orbit coupling, i.e., spin-independent and spin-dependent radially-periodic potentials. For the Bose–Einstein condensates in a spin-independent radially-periodic potential, the density of each component exhibits the periodic density modulation along the azimuthal direction, which realizes the necklacelike state in the ferromagnetic Bose–Einstein condensates. As the spin-exchange interaction increases, the necklacelike state gradually transition to the plane wave phase for the antiferromagnetic Bose–Einstein condensates with larger spin–orbit coupling. The competition of the spin-dependent radially-periodic potential, spin–orbit coupling, and spin-exchange interaction gives rise to the exotic ground-state phases when the Bose–Einstein condensates in a spin-dependent radially-periodic potential.     

Spin–phonon coupling in van der Waals antiferromagnet VOCl

We report magnetization and Raman spectroscopy study on single crystals of VOCl, a van der Waals antiferromagnetic material. Magnetization measurement confirms an antiferromagnetic transition at 79 K and a magnetic easy axis along crystallographic a direction. The temperature-dependent Raman spectrum reveals five peaks at 30 K. Below the Neel temperature TN, the Raman-active modes 247 cm~(-1) and 404 cm~(-1) remarkably deviate from the standard Boltzmann function,which is ascribed to the strong magnetoelastic coupling between spins and phonons. We further observe an anomaly in 383 cm~(-1) mode at around 150 K. This coincides with the broad maximum in VOCl's magnetic susceptibility, suggesting a development of short-ranged magnetic order at this temperature.     

Au-Nanoparticle-Array/Aligned-Ag-Nanowire-Based Flexible Dual Plasmonic Substrate for Sensitive Surface-Enhanced Raman Scattering Detection

The fabrication of flexible surface-enhanced Raman scattering (SERS) substrates for sensitive detection on uneven or irregular surfaces is challenging. In this study, a flexible dual plasmonic SERS (FDPS) substrate rationally constructed using Au nanoparticle (AuNP) arrays/aligned Ag nanowires (AgNWs) and elastic polyurethane (PU) is demonstrated. It exhibits high sensitivity (detection limit of 10⁻⁸ m for melamine and 10⁻¹⁰ m for malachite green) and excellent reproducibility. The well-designed structure of AuNP arrays/aligned AgNWs fabricated using block copolymer self-assembly and oil–water–air interfacial self-assembly successfully enhances the electromagnetic field through plasmonic coupling. In addition, the FDPS substrate retains a high SERS sensitivity after exposure to air at room temperature for 30 days because of the high stability of AuNP arrays and antioxidation characteristic of the PU covered on the aligned AgNWs. Even after undergoing stretching, bending, and twisting for 100 cycles, the FDPS substrate maintains a stable SERS activity owing to the introduction of the elastic PU. This study demonstrates a potential application of SERS detection under practical conditions for irregular surfaces and may be helpful in the development of flexible sensors.     

Magnetic anisotropy manipulation and interfacial coupling in Sm3Fe5O12 films and CoFe/Sm3Fe5O12 heterostructures

The magnetic anisotropy manipulation in the Sm₃Fe₅O₁₂ (SmIG) films and its effect on the interfacial spin coupling in the CoFe/SmIG heterostructures were studied carefully. By switching the orientation of the Gd₃Ga₅O₁₂ substrates from (111) to (001), the magnetic anisotropy of obtained SmIG films shifts from in-plane to out-of-plane. Similar results can also be obtained in the films on Gd₃Sc₂Ga₃O₁₂ substrates, which identifies the universality of such orientation-induced magnetic anisotropy switching. Additionally, the interfacial spin coupling and magnetic anisotropy switching effect on the spin wave in CoFe/SmIG magnetic heterojunctions have also been explored by utilizing the time-resolved magneto-optical Kerr effect technique. It is intriguing to find that both the frequency and effective damping factor of spin precession in CoFe/SmIG heterojunctions can be manipulated by the magnetic anisotropy switching of SmIG films. These findings not only provide a route for the perpendicular magnetic anisotropy acquisition but also give a further path for spin manipulation in magnetic films and heterojunctions.     

驱动马达定向运动的随机动力学模型

本文在非对称周期势中考虑驱动马达的机械化学耦合,基于布朗马达的工作原理,利用MATLAB数值模拟驱动马达在一定实验条件下的运动特征.我们首先模拟了单个驱动马达的位移和速度随时间变化的图像,然后分别计算了多个驱动马达运动的平均速度,最后计算了不同负载力条件下马达运动速度的系综平均值.模拟结果表明驱动马达在定向运动中存在等待态和行走态,行走步长约为8.2nm,且马达运动具有一定的随机性.通过与实验比较,发现模型计算结果与实验吻合.     

自旋轨道耦合Su-Schrieffer-Heeger原子链系统的电子输运特性

在Su-Schrieffer-Heeger (SSH)原子链中,电子在胞内和胞间的跳跃依赖于其自旋时,即SSH原子链存在自旋轨道耦合作用时,存在不同缠绕数的非平庸拓扑边缘态.如何探测自旋轨道耦合SSH原子链不同缠绕数的边缘态是一个重要问题.本文在紧束缚近似下研究了自旋轨道耦合SSH原子链的非平庸拓扑边缘态性质及其零能附近的电子输运特性.研究发现四重和二重简并边缘态的缠绕数分别为2和1;并且仅当源极入射电子的自旋被极化(铁磁电极)时,自旋轨道耦合SSH原子链在零能附近的电子输运特性才能反映其边缘态的能谱特性.尤其是,随着自旋轨道耦合SSH原子链与左、右导线之间的耦合强度由弱到强改变,对于缠绕数为2的四重简并边缘态,入射电子在零能附近的透射峰数目将从4个变为0;而对于缠绕数为1的二重简并边缘态情形,其透射峰数目将从2个变为0.因此,在源极为铁磁电极的情形下,通过观察自旋轨道耦合SSH原子链在零能附近电子共振透射峰的数目随着其与左、右导线之间耦合强度的变化,来探测其不同缠绕数的边缘态.上述结果为基于电子输运特性探测自旋轨道耦合SSH原子链不同拓扑性质的边缘态提供了一种可选择的理论方案.