槽内热磁耦合流动换热数值模拟

数值模拟研究了矩形槽内导电流体由于焦耳热作用和电磁力共同作用引起的流动换热现象.数值结果表明,在给定流体性质情况下,焦耳热作用引起对流为两涡,电磁力作用时获得四涡流动,随Ha数的增加,电磁力驱动对流作用增大,热、磁共同作用时,流场温度场与Ha2Pr/Ra大小有关,从而影响到对流换热的强弱,在临界Ha2Pr/Ra以下,焦耳热引起的对流为主,Ha数增加,减弱换热;在临界日Ha2Pr/Ra以上,电磁力驱动的对流为主,Ha数增加,换热强化.     

S—Ka频段电磁波在等离子体中传输特性的实验研究

在感应耦合等离子体风洞上开展了等离子体中电磁波传输特性实验研究,获得了不同频率电磁波在等离子体中的传输衰减.通过微波诊断技术,获得了等离子体射流的电子数密度和碰撞频率.通过矢量网络分析仪和标准增益天线组成的电磁波传输特性测试系统,获得了电磁波经过等离子体之后的衰减,研究了电子数密度范围7.0×10~(10)-1.0×10~(13)cm~(-3)、等离子体碰撞频率在109 Hz量级的等离子体对2.6—40 GHz不同频率电磁波传输特性的影响,分析了经典传输理论和薄层理论预测结果与实验结果的差异.该实验工作为等离子体中电磁波传输特性的理论研究和数值仿真提供了基础数据.     

洛伦兹力对自由燃烧弧和壁稳非转移弧流场的影响

通过耦合迭代求解流体力学方程和电磁场方程,数值模拟了转移式自由燃烧电弧和具有细长中间段及突扩阳极结构的壁稳式非转移直流电弧的流场,分析了洛伦兹力对这两种典型直流电弧流场的影响。结果显示:在自由燃烧电弧情况下,电流自感磁场的洛伦兹力对流场特性有显著影响,自磁压缩是约束电弧的主要机制;而在壁稳式非转移直流电弧情况下,相对于强壁面约束和气动力作用而言,洛伦兹力对流场的影响有限。特别在中间段出口以后,洛伦兹力与气动力的比值小于0.010,因此,当主要考虑壁稳式非转移直流电弧发生器出口参数时,为了提高数值模拟效率,可忽略洛伦兹力的作用。     

氩气感应耦合等离子体速度与温度数值模拟

为了获得用于研究再入飞行器热防护系统的感应耦合等离子体风洞流场数据，基于流场、电磁场和化学场的多场耦合建立了非平衡态感应耦合等离子体数值模型。利用该模型对不同入口质量流率和不同工作压力下的感应耦合等离子体进行了数值模拟，得到了相应工作参数下感应耦合等离子体温度与速度的分布特性。计算结果表明：等离子体中心线上的速度随着入口质量流率的增大而增大，而随着工作压力的增大而减小；同时，等离子体中心线上的温度随着入口质量流率的增大而减小，而随着压力的增大先减小后增大。这些结果可为感应耦合等离子体风洞优化设计及其工业应用提供理论指导。     

基于等离子体粒子模拟的喷气Z箍缩过程物理研究

给出了喷气Z箍缩动力学过程在二维柱坐标系下的等离子体粒子模拟物理模型,编写了相应的程序.对低电流驱动下的稀薄喷气Z箍缩动力学过程进行了验证性的等离子体粒子模拟,得到了许多微观的Z箍缩物理信息,如负载中的电流(密度)、电磁场、粒子位置和密度的时空演化,以及总的z箍缩拖尾质量和拖尾电流等信息.发现在Z箍缩过程中,模拟得到的等离子体电流随时间的变化反映出了等离子体箍缩到心和反弹的过程特征,磁场随径向的变化与长直导线电流给出的磁场很接近;电子所受到的电场力和磁场力(洛伦兹力)是相当的,而离子所受到的力主要是电场力;电子首先在z方向加速,然后在自身运动产生电流的磁场的作用下向轴心箍缩,而离子是在电子和离子电荷分离所产生的电场力的作用下向轴心运动;在压缩到轴心附近时,电子首先因静电排斥而飞散,而离子则在惯性的作用下继续向轴心箍缩,而后滞止飞散.Z箍缩等离子体的拖尾质量在20%左右,拖尾电流最大时在7%左右.     

槽道湍流展向振荡电磁力控制的实验研究

对槽道湍流的展向振荡电磁力控制进行了实验研究,讨论了展向振荡电磁力对宏观流场、近壁湍流结构以及壁面阻力的影响.采用谱方法进行了数值模拟的对比.数值模拟和实验结果均表明展向振荡电磁力能够使近壁区域的宏观流场产生周期性振荡,并影响壁湍流的条带结构,使其在展向上发生倾斜,从而使壁面阻力减小.     

等离子体激励器在航空航天工程中的应用前景

文章基于等离子体的Joule加热、静电力、Hall效应以及Lorentz加速度等固有特性,对等离子体在航空航天领域（不包括电推进和飞行器再入热防护方面）中的应用进行总结及评估.等离子体激励器在亚声速流到高超声速流的整个空气动力学领域及稀薄流领域,得到了广泛的应用.真正引人瞩目的是,与所控制的流场相比,应用中所加入的电磁力或能量仅仅与其扰动水平相当.因此,有效的流动控制往往就限制在像流动分离、流体动力学不稳定性、动态失速和涡破碎等动力学分岔问题中.有效的控制应用通常是利用有黏-无黏流相互作用的放大效应、外部磁场或微波能量的加入等来增强其控制效果.最后文章根据这些评估,对未来学科前沿提出了几点基础创新研究方向的建议.      

Discharge impedance of solenoidal inductively coupled plasma discharge

The discharge impedance is calculated for a solenoidal inductively coupled plasma (ICP) discharge, which is one of the important sources for plasma processing. To calculate this impedance, the electromagnetic field quantities are obtained by solving the two-dimensional Maxwell equations in a realistic geometry. Also considered in the calculation is the anomalous skin effect which is regarded as a collisionless heating mechanism of ICP discharge. The results show that the discharge impedance is a function of various discharge parameters, such as plasma density, electron temperature, antenna position, collision frequency, excitation frequency, and chamber geometry.     

����FLUENT�Ķ�ά��Ӧ��ϵ����������ֵģ��

将等离子体作为磁流体,考虑其流体属性和电磁属性,介绍了利用FLUENT软件包并将其进行二次开发,解算电磁场方程、质量连续性方程、动量守恒方程、以及能量守恒方程的数值模拟方法,得到了以磁矢势为表达形式的电磁场分布、温度分布和速度分布.数值模拟了粉末球化所用的感应耦合等离子体炬电磁场分布、温度分布、速度分布.分析了温度分布、速度分布产生的物理原因,为感应耦合等离子体炬球化粉末颗粒提供理论性指导.     

Magnetoplasma Lamination due to Microwave Gyroresonant Heating

The hysteresis transitions between two temperature states of a collisional magnetoplasa due to Joule heating near by the electron gyroresonance are analysed. The propagation of intense extra-ordinary gyroresonant microwave across the magnetic field in a plasma is responsible for such jump-like thermic effects, the wave amplitudes being less than the “characteristic plasma field”. The transversal heat conductivity may lead to formation of spatially periodical temperature profiles in the hysteresis region of wave's intensity; the spatial periods of such profiles are much less than the Joule dissipation length of heating wave. The thermodiffusion, stimulated by temperature lamination, may form the spatial oscillations of magneto-plasma density across the magnetic field.     

The Faraday law of induction for an arbitrarily moving charge

The Faraday law of electromagnetic induction for an arbitrarily moving charge is generalized and the expression for the force acting on the charge in an alternating magnetic field is obtained. It is shown that besides the Lorentz force perpendicular to the velocity of the particle, the Faraday force parallel to the particle velocity and proportional to it is acting on the charge, too. The equations of motion of the charged particle and the magnetic moment are obtained in the time-varying magnetic field. The problems of induction acceleration of charged particles (betatron) and induction heating of medium (plasma, plasma betatron) are considered.     

边界层效应影响等离子体气动激励诱导激波机理

 针对小型暂冲式超声速风洞进行的诱导激波实验结果,提出等离子体气动激励诱导激波的机理不仅取决于放电时产生的焦耳热效应,放电区域的边界层厚度也起到了决定性的作用的推论。为进一步验证此思想,在高超声速激波风洞进行了等离子体气动激励诱导激波的实验研究。结果表明,在边界层很薄的情况下,等离子体气动激励能够诱导出斜激波。分别阐述了两种实验条件下诱导激波的机理,证实了边界层效应在等离子体与激波相互作用中起到了决定性作用。     

Numerical Simulation of MHD Peristaltic Flow with Variable Electrical Conductivity and Joule Dissipation Using Generalized Differential Quadrature Method

In this paper, the MHD peristaltic flow inside wavy walls of an asymmetric channel is investigated, where the walls of the channel are moving with peristaltic wave velocity along the channel length. During this investigation,the electrical conductivity both in Lorentz force and Joule heating is taken to be temperature dependent. Also, the long wavelength and low Reynolds number assumptions are utilized to reduce the governing partial differential equations into a set of coupled nonlinear ordinary differential equations. The new set of obtained equations is then numerically solved using the generalized differential quadrature method(GDQM). This is the first attempt to solve the nonlinear equations arising in the peristaltic flows using this method in combination with the Newton-Raphson technique. Moreover, in order to check the accuracy of the proposed numerical method, our results are compared with the results of built-in Mathematica command NDSolve. Taking Joule heating and viscous dissipation into account, the effects of various parameters appearing in the problem are used to discuss the fluid flow characteristics and heat transfer in the electrically conducting fluids graphically. In presence of variable electrical conductivity, velocity and temperature profiles are highly decreasing in nature when the intensity of the electrical conductivity parameter is strengthened.     

Computational Model of Thermal‐Fluid Flow in a Radio‐Frequency Plasma Torch

The paper aims to clarify the modelling results concerning the heat transfer and fluid flow in a radio‐frequency plasma torch with argon at atmospheric pressure. Fluid numerical simulation requires the coupling of magnetohydrodynamics (MHD) and thermal phenomena. This model combines Navier–Stokes equations with the Maxwell's equations for compressible fluid and electromagnetic phenomena successively. A numerical formulation based on the finite element method is used. In this study, fluid flow and temperature equations are simultaneously solved (direct method, instead of using the indirect method) using a finite elements method (FEM) for optically thin argon plasmas under the assumptions of local thermodynamic equilibrium (LTE) and laminar flow. Appropriate boundary conditions are given, and nonlinear parameters such as the thermal and electrical conductivity of the gas and input power used in the simulation are detailed. We have found that the source of power is located on the torch wall in this type of inductive discharge. The center can be heated by conduction and convection via electromagnetic phenomena (power loss and Lorentz force). (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

风沙运动的电场-流场耦合模型及气固两相流数值模拟

沙尘暴和尘卷风等风沙运动的静电场是空气流场中沙粒间的碰撞摩擦带电及沙粒粒径的分层效应引起的, 本文耦合沙粒摩擦荷电模型和风沙运动气固两相流模型, 提出了离散单元法与计算流体动力学结合的数值方法. 数值模拟计算表明电荷呈中性的沙粒临界直径为300 μm; 在充分发展的水平风沙流中, 细小的沙粒带负电, 较大直径的沙粒带正电, 所模拟的沙粒带电的荷质比及水平风洞试验段的电场强度与实验测量值一致, 验证了风沙运动的电场-流场耦合模型及数值计算方法的合理性. 本文基于沙粒摩擦荷电机理的风沙运动气固两相流模型提供了理解风沙运动静电场产生的一种物理机理.     

Self-consistent equations for the interaction of an atom with an electromagnetic field of arbitrary intensity

A system of equations is suggested for the interaction of an atom with an electromagnetic field of arbitrary intensity. The distinctive feature of the equations is that, in the absence of the field, the electron density in the atom is determined by the Schrödinger equation and, in the presence of the field, by the equation resembling the classical equation for an electron in the Lorentz force field.     

Drag reduction in turbulent channel flow using bidirectional wavy Lorentz force

Turbulent control and drag reduction in a channel flow via a bidirectional traveling wave induced by spanwise oscillating Lorentz force have been investigated in the paper. The results based on the direct numerical simulation (DNS) indicate that the bidirectional wavy Lorentz force with appropriate control parameters can result in a regular decline of near-wall streaks and vortex structures with respect to the flow direction, leading to the effective suppression of turbulence generation and significant reduction in skin-friction drag. In addition, experiments are carried out in a water tunnel via electro-magnetic (EM) actuators designed to produce the bidirectional traveling wave excitation as described in calculations. As a result, the actual substantial drag reduction is realized successfully in these experiments.     

确定分布的展向Lorentz力调制下的槽道湍流涡结构

采用直接数值模拟方法,对槽道湍流中确定分布的Lorentz力的流动控制与减阻问题进行研究.讨论了Lorentz力作用于槽道湍流后,流场的特性和涡结构的特性,并对此类Lorentz力对槽道湍流的控制与减阻机理进行了讨论.研究发现:1)Lorentz力诱导的层流流场壁面附近存在梯度极大的展向速度剪切层,该剪切层容易形成流向涡结构;2)在给定合适参数的确定分布的Lorentz力作用下,湍流流场仅剩周期分布的准流向涡;3)与未控制流场相比,控制后的流场中,准流向涡的抬升高度大大降低,从而减小猝发强度,使壁面阻力下降.     

EAST 电子回旋共振加热效果的数值模拟和分析

为了给EAST 电子回旋共振加热物理实验提供理论依据和模拟预测,从电子热输运方程出发,运用 CRONOS 输运程序对不同等离子体和波参数下,电子回旋加热效果进行了数值模拟计算。给出不同电子回旋波功率、入射角、电子密度和纵场等参数对电子回旋加热效果的影响,预测在不同参数下,电子温度、等离子体总内能和能量约束时间的变化,分析了其原因,并与实验结果进行了初步的比较。