可用于激光核聚变的闪烁中子探测器

在当前激光核聚变实验中,中子集中在短时间内出现、且产额低。为适应这种特点,要求探测器的效率高,分辨时间短。利用闪烁中子探测器探测激光核聚变所产生的中子,能测定中子产额,记录中子能量,而且探测效率高,分辨时间短。缺点是易受γ射线、X射线的干扰。     

Rebuilding of metal components with laser cladding forming

Laser cladding forming (LCF) is a novel powerful tool for the repairing of metal components. Rebuilding of V-grooves on medium carbon steel substrates has been carried out with laser cladding forming technique using stainless steel powder as the cladding material. Microstructure of the deposited layers has been characterized using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive X-ray microanalysis (EDAX), electron probe microanalysis (EPMA) and X-ray diffraction (XRD). Mechanical properties of the rebuilt V-groove samples have been evaluated by tensile and impacting tests and microhardness measurement. Experimental results show that good fusion bonding between the rebuilt layers and the substrate has been formed, and the microstructure of the cladding layers is mainly composed of fine, dense and defect-free epitaxial columnar dendrites. Due to the effect of grain size refinement, the tensile strength, impacting toughness, elongation and microhardness of the rebuilt samples have been greatly enhanced compared to those of the substrate. Microhardness is also very uniform throughout the rebuilt regions. With the growth of the deposited layers, the microhardness increases gradually. The good ductility of the deposited regions is verified by the SEM fracture analysis.     

Matrix assisted pulsed laser evaporation processing of triacetate-pullulan polysaccharide thin films for drug delivery systems

We report the first successful deposition of triacetate-pullulan polysaccharide thin films by matrix assisted pulsed laser evaporation. We used a KrF* excimer laser source (λ = 248 nm, τ ≈ 20 ns) operated at a repetition rate of 10 Hz. We demonstrated by FTIR that our thin films are composed of triacetate-pullulan maintaining its chemical structure and functionality. The dependence on incident laser fluence of the induced surface morphology is analysed.     

激光对生物分子的共振激发作用

在生物分子的“谐”和“非谐”振子势模型的基础上，用量子力学讨论了激光对生物分子的共振激作用；并用之对激光的生物激活、诱变机理的“共振吸收”定性理论作一解析分析。     

Gamma radiation effects on an amine antioxidant added in an ethylene-propylene copolymer

The aim of this work was to compare the gamma radiation induced effects on samples of an ethylene-propylene copolymer antioxidant free with samples loaded with an antioxidant characterised by the presence of an -NH functional group. The employed techniques were Electron Spin Resonance spectroscopy (ESR) and High Performance Liquid Chromatography (HPLC). Stable radicals R---NO° due to the interaction of free radicals produced in the irradiated polymer with the antioxidant have been observed by ESR at room temperature. The time evolution of the ESR signals following the irradiation was examined at different doses. The amount of antioxidant not involved in the oxidation reactions has been determined using HPLC.     

韧性金属裂纹尖端损伤区内应变场测量——数字散斑相关法应用

本文用数字散斑相关方法测量了五种不同幂硬化指数韧性金属材料(铝和铜),双边裂纹尖端细观区域内应变场.对所得结果用韧性损伤模型进行了分析.在此法中以金属自然表面结构为散斑场,不同加载状态的散斑场进行比较,得到相对变形与应变.图象之间相关性 C 是变形参数或是位移及其导数的泛函.使其相关性 C 取最大值的试凑变形即为其真实变形场.这一方法在细观测量中应用得到满意的结果.     

毛细管凝胶电泳的激光光热在线检测

近年来,毛细管电泳已成为一种高效快速的微化学分离分析新技术,在无机、有机及生物化学分析中得到了广泛的应用.但毛细管的内径小,进样量在pg～ng级,给样品的检测带来新的困难.因此,发展高灵敏度的显微在线检测器,已成为毛细管电泳技术发展中的重要环节.基于各种原理的检测器研究已有报道~[1].Dovichi等曾用热透镜技术在线检测了乙腈/     

大鼠肾组织的超低温快速冷冻固定和冷冻置换研究

超低温快速冷冻固定以极高的冷冻速率（１００００Ｋ／ｓ）对生物组织进行物理固定，可使生物组织结构、组织内可溶性离子及游离性物质得到保存，使被固定后的生物组织保持最接近于原自然状态，这种样品制备方法大大优于化学制备法，因而在Ｘ－射线微分析及免疫细胞化学中得到广泛应用。生物样品超低温快速冷冻后，利用冷冻置换法，在低温下将生物组织内的结晶水缓慢置换出来，而后常规包埋切片，可获得理想的组织结构及组织内待分析成分。本文应用超低温快速冷冻固定技术及冷冻置换法对大鼠肾皮质部的快速冷冻固定及损伤进行探讨。     

散射背景下激光热透镜光谱分析法测定人体血清中锌量

建立了散射背景下测定人体血清中Zn^2＋含量的激光热透镜光谱分析方法。比较了蛋白质微粒散射对于分光光度法和激光热透镜光谱分析法测定的影响。结果表明，激光热透镜光谱分析方法能够避免溶液中存留蛋白质微粒散射的影响。Zn^2＋量在0～1．6μg/mL范围内呈线性关系（r=0．9986），检出限为1ng/mL。应用于人体血清中Zn^2＋含量的测定，与原子吸收法测定结果基本一致。     

铜在ρ-Si上激光诱导电沉积过程的研究

由于在微电子器件制造，成像系统及太阳能电池等领域里具有广阔的应用前景，激光诱导化学及电化学沉积金属的研究，最近几年引起了极大兴趣［1－3］，例如Zahavi［4］报道了Pd，Au，Ni－Pd在氩离子激光作用下可以不加偏压实现在半导体Si，InPGaAs上的无掩膜选择性沉积，金属沉积只发生在光照部位．大多数研究工作是围绕应用技术而开展的，理论研究，尤其是光电化学方面的研究尚十分欠缺．我们认为对于普通电镀液中的激光诱导电沉积来讲，既使不需外加偏压，沉积过程也必然伴随着溶液中金属离子与半导体能带之间的电荷传递，因此可以通…