Study of In Situ Formation of Magnesium Hydroxide Whisker via Basic Magnesium Chloride Whisker Regulated by Organic Parcels at Low Temperature

In this work, we demonstrate an in situ phase conversion from basic magnesium chloride（BMC） into magnesium hydroxide whisker by using polar organic solvent at low temperature. The morphology and phase composition of magnesium hydroxide whiskers prepared at different reaction temperature, alkali concentration and organic solvent were analyzed by X-ray diffraction（XRD） and scanning electronic microscope（SEM）. It was found that when one of the organic solvents such as absolute ethyl alcohol, butanol, polyethylene glycol（PEG-400）, acetone, et al. was selected as the template, the precursor BMC can transform into whisker-like magnesium hydroxide through precipitate transformation in low temperature and non-hydrothermal system. It can be reasonably explained that the regulation of Mg^2＋ solubility by those organic solvents and the sustained release of Mg^2＋ dissolution by organic adsorption played a significant role in the formation of magnesium hydroxide whisker via BMC whisker as the precursor.     

Synthesis of Nordstrandite and Nordstrandite-Derived Layered Double Hydroxides of Li and Al: A Comparative Study with the Bayerite Counterpart

The layered double hydroxides (LDHs) of Li and Al can be synthesized from the four polymorphs of Al(OH)₃, namely gibbsite, bayerite, nordstrandite, and doyleite. The crystal structure of this class of compounds depends on the type of the precursor used due to their topotactic reaction mechanism. While the LDHs derived from gibbsite and bayerite yield different crystal structures, the incorporation of Li into nordstrandite was expected to yield new LDH structures different from those derived from gibbsite and bayerite. The structure of nordstrandite derived LDHs were however identical to that derived from the bayerite counterpart. The absence of symmetry in the interlayer of nordstrandite (C₁) makes it unsuitable to accommodate the intercalating anions with different molecular symmetries. To make the interlayer gallery suitable for the anions, the metal hydroxide layers of the nordstrandite translate, transforming nordstrandite to bayerite. The bayerite with site symmetries O_h and C₂ stabilizes the anions in the interlayer by hydrogen bonding. The transformation of nordstrandite to bayerite, when soaked in lithium salt solution is, therefore, a manifestation of the intercalating anions.     

乙醛与新制氢氧化铜反应的条件分析及产物成分探究*

借助手持技术通过电化学方法测定乙醛与新制氢氧化铜反应的电压变化情况,揭示了该反应的本质,通过控制变量的思想探究了NaOH在该反应中所起的作用,并结合相关文献知识和实验对比进一步探究了乙醛与新制氢氧化铜反应产物的成分。     

Mechanistic aspects of magnetic MgAlNi barium-ferrite nanocomposites enhanced adsorptive removal of an anionic dye from aqueous phase

The mechanistic aspects of improved aqueous removal of methyl orange (MO) dyes using high performance novel magnetic MgAlNi barium-ferrite (MgAlNi-BaFe) ternary double layer hydroxide (LDH) nanocomposites is reported in this study. Detailed surface characterization coupled with kinetic, equilibrium, thermodynamics and regeneration studies were undertaken under different operational conditions of temperature (298–318 K), initial concentration (20–100 mg/L), pH (2–6). The kinetic results show that MO sorption was mainly, associated with pseudo-second order and intra-particular diffusion process. The MO adsorption onto the MgAlNi-BaFe nanocomposites suggests a multi-layered sorption process that is endothermic and spontaneous in nature. The MO adsorption mechanism insight taken in cognizance of FTIR, XRD, pKa, zeta potential, the adsorbates surface functional groups and the adsorbate-adsorbent surface charges interactions suggest involvement of hydrogen bonding and n-π interactions, predominantly via physisorption process (ΔG° = −7.406 to −5.69 kJ/mol). The excellent adsorptive performance of the MgAlNi-BaFe adsorbents for removal of MO from water compared with other magnetic LDH nanocomposites was further elucidated via the MgAlNi-BaFe nanomaterials high rates of regeneration and superior performances for three successive desorption-adsorption cycles. This study demonstrates the high potentials of employing MgAlNi-BaFe nanomaterials for removal of dyes from water and wastewater.     

XNBR/LDH nanocomposites: Effect of vulcanization and organic modifier on nanofiller dispersion and strain‐induced crystallization

In elastomer/organo clay nanocomposites, the morphological characteristics, and hence the mechanical properties, of the vulcanizates are strongly influenced by the organic modifier and the vulcanization process. When the elastomer itself undergoes strain‐induced crystallization, both the organic modifier and the dispersed filler particles could significantly influence the crystallization process. These phenomena are very common in case of natural rubber‐based vulcanizates. In this study, the similar effects have been demonstrated with carboxylated nitrile rubber (XNBR) and organically modified layered double hydroxide (O‐LDH)‐based nanocomposites. The effect of size of the organic modifier was obviously visible on the interlayer distance of O‐LDH and also on the morphological reorganization of the dispersed O‐LDH particles during vulcanization process. The strain‐induced crystallization of the XNBR was found to be strongly dependent on the morphological change that occurs during vulcanization process. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

An efficient synthesis of pyrazole chalcones under solvent free conditions at room temperature

An easy,safe,solvent free and effective method for the synthesis of pyrazole-substituted chalcones has been achieved by grinding pyrazole aldehydes and acetophenones in the presence of activated barium hydroxide(C-200) in high yield within short span of time.All reactions were carried out just by grinding the two reactants in the presence of activated barium hydroxide(C-200). Results are also compared with sodium hydroxide and potassium hydroxide.     

Microwave–assisted synthesis of <Emphasis Type="Italic">submicrometer</Emphasis> GaO(OH) and Ga<Subscript>2</Subscript>O<Subscript>3</Subscript> rods

Submicrometer sized gallium oxide hydroxide (GaO(OH)) and gallium oxide (Ga₂O₃) rods have been successfully fabricated on a large scale by refluxing an aqueous solution of Ga(NO₃)₃ and NH₄OH in a simple domestic microwave oven (DMO). The structures, morphologies, compositions and physical properties of the as–synthesized and calcined products have been characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), selected area energy dispersive X-ray spectroscopy (SAEDS), thermo gravimetric analysis (TGA), differential scanning calorimetry (DSC), and energy dispersive X-ray (EDX) analysis. TEM images show that submicrometer sized as–synthesized Ga O(OH) rods have diameters of 0.3–0.5 m and lengths of 3.2–3.5 m. The calcined product consists of submicrometer rods with diameters of 0.4–0.5 m and lengths of 5–5.5 m. XRD, EDX and SAED analysis together indicate that the as–synthesized product has an orthorhombic gallium oxide hydroxide (GaO(OH)) crystal structure, and that the calcined product is rhombohedral Ga₂O₃. A possible mechanism for the formation of submicrometer sized GaO(OH) rods is discussed briefly.     

Facile Hydrolysis of Esters with KOH-Methanol at Ambient Temperature

Summary. A simple, rapid, and efficient method is reported for the hydrolysis of a variety of mono- and diesters of aromatic, aliphatic, fatty, and heterocyclic acids with potassium hydroxide in methanol at ambient temperature (35°C).     

Aluminum Complexes with a Donor Polymer: New Route to Organic/Inorganic Polymer Hybrids

The formation of alumina particles from aluminum salts in the presence of poly(1-vinylimidazole) was investigated by quantitative ²⁷Al NMR, potentiometry and FTIR spectra. The interaction of poly(1-vinylimidazole) with aluminum chloride and nitrate in an aqueous medium stabilizes [AlO₄Al₁₂(OH)₂₄]⁷⁺ and less ordered polymeric particles. The addition of NaOH (NaOH: Al 2) results in water-insoluble organic/inorganic hydrogen-bonded composites. Stabilization of the complexes is realized by cooperative hydrogen N···H—O—Al bonds, without N Al donor-acceptor interactions.     

Surface treatment of magnesium hydroxide to improve its dispersion in organic phase by the ultrasonic technique

Micron magnesium hydroxide [Mg(OH)₂] was modified by means of ultrasonic method with stearic acid (SA) as modifier in water. The Fourier transform infrared spectroscopy (FT-IR) and element analysis showed all SA was bonded upon the surface of the Mg(OH)₂ forming a coating layer and no free SA was detected after the modifying process. The thickness of coating SA on the Mg(OH)₂ was determined by X-ray photoelectron spectroscopy (XPS). Compared with the unmodified Mg(OH)₂, the modified Mg(OH)₂ had better dispersion property in xylene, slower sedimentation velocity of dilute suspension in xylene and lower viscosity of suspension in paraffin liquid. The results showed that the modified Mg(OH)₂ could be dispersed much better than the unmodified Mg(OH)₂ in organic phase.