无参考源电路的 E C L 电路设计

普通ECL门电路工作时均需要外加参考源,为提高门电路的稳定性,需要对参考源采取有效的温度和电源电压补偿措施,因而各种改进型的参考源电路相继提出.NTL电路及FECL电路即是其中的实例.本文提出一种利用ECL电路本身的输出经过分压后提供给参考管基极作为参考电压的新型ECL电路,并对其进行分析考察.     

一种基于多目标约束的互连线宽和线间距优化模型

优化线宽和线间距已经成为改善系统芯片性能的关键技术.本文基于互连线线宽和线间距对互连延时、功耗、面积和带宽的影响,提出了基于多目标优化方法实现优化线宽和线间距的思路,并利用曲线拟合方法得到了多目标约束的解析模型.Hspice验证结果显示,该解析模型精度较高,平均误差不超过5%,算法简单,能有效弥补应用品质因数方法的缺陷,可以应用于纳米级互补金属氧化物半导体系统芯片的计算机辅助设计.     

Design and fabrication of automated sedimentation-based separation and siphon-based extraction for detection of allergic reaction on a centrifugal microfluidic disc

We report the design and fabrication of a novel and fully integrated polymer-based centrifugal microfluidic disc for rapid automatic allergens detection. All essential steps for a single test including flow valving, sequencing, mixing, separation, extraction, and sedimentation for final detection are automatically conducted within 30 min on a centrifugal microfluidic disc. Our design features a siphon-based valving and analyte extraction structure where the released analyte is separated and subsequently extracted by a siphon valve into the detection chamber. Incorporating the siphon valve and a series of capillary valves, we realize automated detection of allergic reaction on a centrifugal microfluidic disc.     

Bulk工艺气体微网探测器的研究

In this paper, we present a study of a micromegas detector prototype built with bulk technology. Following a short discussion of the micromegas detector＇s structure and working mechanism, the bulk fabrication process is described, and some testing results of the prototype are presented.     

基于改进Adaptive Lasso的多工序制造过程关键质量特性识别

为解决多工序制造过程关键质量特性识别中存在的质量特性间具有多重相关性以及数据高维度, 小样本等问题,本文采用主成分回归改进Adaptive Lasso方法并融合状态空间思想和Bootstrap方法实现多工序过程关键质量特性识别。首先引入状态空间思想构建多工序过程关键质量特性识别模型,然后利用Bootstrap方法重构样本,扩大样本量;进而采用改进Adaptive Lasso方法识别关键质量特性,并通过仿真验证改进Adaptive Lasso方法与Lasso,Adaptive Lasso和岭回归方法在质量特性间不同相关度下识别的有效性;最后通过实例说明改进Adaptive Lasso的具体应用过程,仿真及实例结果显示,改进Adaptive Lasso方法对多工序过程有良好的关键质量特性识别能力,特别当质量特性间有较强相关性时显著优于其它两种方法。     

基于演化博弈的制造企业服务创新扩散研究

制造企业服务化是我国实现制造强国的必经之路,本文以“中国制造2025”战略为背景,通过借鉴创新扩散和演化博弈理论,对社会系统中参与服务创新的相关主体进行分析,构建政府与企业之间演化博弈模型,结合并改进Bass经典创新扩散模型,探究政府规制行为对企业服务创新行为演化及扩散的影响,利用Matlab对复制动态方程和扩散模型进行数学推导和数值仿真分析。结果表明:当满足政府的社会总收益大于其调控成本和各项补贴总额且企业选择服务创新策略时收益的额外增加额大于其实际投入时,系统才会演化至政府调控且企业采纳服务创新的稳定状态;适当增加政府对企业的调控力度、投入补贴和税收补贴有助于推进服务创新在系统中的扩散,其中税收补贴的感知能力最强,投入补贴最弱;将抑制系数引入Bass创新扩散模型,构建互补型、竞争型和替代型三种服务创新的扩散模式,其中竞争型扩散符合中国现阶段市场规律,替代性扩散将成为未来制造企业的发展趋势。     

大口径连续相位板远场光强的离线测试实验

为了准确测试和评价大口径连续相位板（CPP）元件的远场光强性能,根据激光装置需求建立了351 nm波长下大口径CPP远场光强离线测试系统,开展了330 mm330 mm口径CPP元件测试实验,并与标量衍射计算结果进行对比,分析了系统的测试重复性和测试精度。实测系统远场弥散斑大小为2.9倍衍射极限,可测试最大口径为圆形f600 mm和方形430 mm430 mm。测试系统在焦点2 mm范围内的能量集中度测试重复性优于0.2 %。计算和实验焦斑形貌及分布吻合,实测能量集中度比计算结果小0.85%、焦斑半径大13 m左右,差异由实测系统的时间匀滑作用引起,可通过缩短曝光时间和减小系统像差等措施进一步提高测试精度。     

Determining polymer film thickness during manufacturing with broadband transmission

A novel broadband transmission method to determine polymer film thickness during manufacturing is proposed, and a measurement system is developed based on this method. The relationship between broadband optical power and film thickness is deduced according to the Lambert-Beer law. The system is composed of a halogen light and an optical power meter. Results show that the measurement error of this method is approximately 1 μm, and the resolution of the system is below 0.4 μm for polymer films with less than 100-μm thickness.     

Preliminary results for the design,fabrication,and performance of a backside-illuminated avalanche drift detector

The detection of low-level light is a key technology in various experimental scientific studies. As a photon detector, the silicon photomultiplier （SiPM） has gradually become an alternative to the photomultiplier tube （PMT） in many applications in high-energy physics, astroparticle physics, and medical imaging because of its high photon detection efficiency （PDE）, good resolution for single-photon detection, insensitivity to magnetic field, low operating voltage, compactness, and low cost. However, primarily because of the geometric fill factor, the PDE of most SiPMs is not very high; in particular, for those SiPMs with a high density of micro cells, the effective area is small, and the bandwidth of the light response is narrow. As a building block of the SiPM, the concept of the backside-illuminated avalanche drift detector （ADD） was first proposed by the Max Planck Institute of Germany eight years ago; the ADD is promising to have high PDE over the full energy range of optical photons, even ultraviolet light and X-ray light, and because the avalanche multiplication region is very small, the ADD is beneficial for the fabrication of large-area SiPMs. However, because of difficulties in design and fabrication, no significant progress had been made, and the concept had not yet been verified. In this paper, preliminary results in the design, fabrication, and performance of a backside-illuminated ADD are reported; the difficulties in and limitations to the backside-illuminated ADD are analyzed.