70 GHz二次谐波倍频回旋速调管研究

 对70 GHz二次谐波倍频回旋速调管高频结构和电子与波互作用进行了研究。研究了TE02模腔体绕射品质因数及模式转化，解决了二次谐波倍频回旋速调管漂移段不能截止70 GHz的TE01模而引起的腔体间高频串扰的问题。分析了注电流、输入功率、电子横纵速度比和电子注引导中心半径等参数对输出功率、增益和效率的影响。针对二次谐波回旋速调管放大器工作频带窄、效率低，进行了高频结构优化设计，显著地展宽了工作频带，提高了互作用效率。在理论分析和高频计算的基础上，建立了注-波互作用PIC（粒子模拟）模型，进行了粒子模拟计算和优化，得到了70 GHz 的二次谐波倍频四腔回旋速调管放大器设计方案。粒子模拟结果表明：在工作电压70 kV，注电流13 A，电子注横向速度与纵向速度比为1.5时，中心频率69.81 GHz输出功率256 kW，带宽160 MHz，电子效率28%，饱和增益大于44 dB。     

北京大学DC-SC光阴极注入器的升级设计

 基于直流电子枪-超导加速腔（DC-SC）光阴极注入器样机的初步实验结果，北京大学提出了新的注入器的改进设计。新注入器核心结构包括皮尔斯枪和3+1/2超导腔。文章给出了它们的详细结构参数，然后采用程序，对注入器的束流动力学进行了模拟。结果发现：新注入器可以提供具有高束流品质、高平均流强的电子束，束团的电荷量100 pC，横向发射度低于2 mm·mrad,脉宽5 ps,rms束斑可达0.5 mm，重复频率81.25 MHz；也可以提供电荷量为300 pC低重复频率的高峰值流强的电子束，其横向发射度小于3 mm·mrad,脉宽约为9 ps，以满足北京大学自由电子激光（PKU-FEL）实验平台的要求。     

声光调制器在激光腔倒空技术中的应用

本文介绍了以36°Y切铌酸锂为换能器,以熔石英为声光互作用介质,驱动频率为389。5MHz的声光调制器的设计;计算并选定了换能器的各镀层厚度,研制成了用于激光腔内的中心频率389.5MHz声光脉冲调制器;叙述了该器件在同步泵浦染料激光器腔倒空技术中的应用。实验表明,当驱动平均功率约0.2W时,用该器件所实现的激光腔倒空的倒空比约40％。     

全固态高功率连续单横模Nd:YVO4/LBO绿光激光器

报道了激光二极管泵浦的高功率连续单横模绿光激光器。考虑到激光晶体因吸收泵浦光而产生的热透镜效应,我们选择低掺杂浓度Nd:YVO4激光晶体,设计了V字型热不灵敏折叠式驻波谐振腔,利用I类非临界相位匹配LBO非线性晶体,当泵浦功率为23 W时,得到7 W单横模532 nm绿光输出功率,光-光转化效率为33%,长期功率稳定性优于1.6%(自由运转3小时)。     

Entangling Two Multi-atomic Clusters Through a Cavity Field

Two atomic clusters, which have NA and Ns two-level atoms, respectively, are placed in a cavity but separated spatially. There is no direct interaction between the atoms. All the atoms interact with a single-mode of the cavity field. Quantum entanglement between the two atomic clusters is investigated for various initial states of the two atomic clusters and the field. When the cavity field is initially in a Fock state, we find that the time evolution of entanglement quasi-periodically oscillates regardless of the initial states of atoms. The oscillation period increases as the initial photon number increases. When all the atoms in both of the atomic clusters are initially in the excited state, we show that there is no entanglement between the atomic clusters with NA = NB = 1 regardless the initial state of the cavity field. However, when either NA or NB is larger than one, we find that the entanglement always exists even for a strong thermal field. In cases with different initial states of the atomic clusters, we notice that the entanglement becomes stronger as number of the atoms increases. When all the atoms in both of the clusters in the ground state, we also find that the entanglement can be enhanced even by a thermal field. We also notice that a single qubit can be entangled with multi-atoms which are initially in the ground state by the cavity field initially being in vacuum, thermal, coherent, and squeezed states.     

聚酰胺酸合成工艺研究

 采用超声波在线测量溶液粘度的方法，研究了合成聚酰胺酸过程中实验条件的影响，并对实验结果进行分析，由此确定了合成高分子量聚酰胺酸的最佳实验条件。研究表明：在加料次序为先加二胺后加二酐（二酐与二胺的摩尔比为1.01～1.02：1）、试剂中含水量尽可能少，反应温度0～5℃、反应时间以溶液粘度到达最大值为止的条件下，所合成的聚酰胺酸溶液粘度最大，可满足惯性约束聚变（ICF）充气腔靶端口膜的需要。     

在CPM非稳腔Nd:YAG激光器中用被—被动锁模方法选单脉冲的探讨

在CPM Nd:YAG非稳腔激光器中,我们使用透过率较大的可饱和吸收体使单脉冲序列中的脉冲个数减少到3—5个,在输出的单序列中再使用非线性介质进行处理,可以得到比较接近的单脉冲输出。     

Realization of Greenberg-Horne-Zeilinger （GHZ） and W Entangled States with Multiple Superconducting Quantum-Interference Device Qubits in Cavity QED

An alternative scheme is proposed for generating the Greenberg-Horne-Zeilinger （GHZ） and W types of the entangled states with multiple superconducting quantum-interference device （SQUID） qubits in a single-mode microwave cavity field. In this scheme, there is no transfer of quantum information between the SQUIDs and the cavity, the cavity is always in the vacuum and thus the requirement on the quality of cavity is greatly loosened. In addition, during the process of the generation of the W entangled state, the present method does not involve a real excitation of intermediate levels. Thus, decoherence due to energy relaxation of intermediate levels is minimized.     

分析非轴对称腔的复光线数值迭代法

将像散光束的复光线表示法用于分析非轴对称腔，并对有复杂像散的折迭腔作了数值迭代计算以说明方法的应用．     

光纤法布里-珀罗传感器腔长的傅里叶变换解调原理研究

在宽带光源条件下对光纤法布里-珀罗传感器腔长的傅里叶变换解调原理进行了详细的理论推导,在此基础上给出了具体的实现算法和仿真对比实验.仿真结果表明:采用傅里叶变换可以有效地对光纤法布里-珀罗传感器进行腔长解调.