氟化类金刚石薄膜的拉曼和红外光谱结构研究

关键词：     

Deposition of Diamond-Like carbon Films by High-Intensity Pulsed Ion Beam Ablation at Various Substrate Temperatures

Diamond-like carbon (DLC) films have been deposited on to Si substrates at substrate temperatures from 255℃ to 400O℃ by a high-intensity pulsed-ion-beam (HIPIB) ablation deposition technique. The formation of DLC is confirmed by Raman spectroscopy. According to an x-ray photoelectron spectroscopy analysis, the concentration of sp^3 carbon in the films is about 40% when the substrate temperature is below 300℃ C. With increasing substratetemperature from 25℃ to 400℃, the concentration of sp^3 carbon decreases from 43% to 8%. In other words,sp3 carbon is graphitized into sp^2 carbon when the substrate temperature is above 300℃. The results of xray diffraction and atomic force microscopy show that, with increasing the substrate temperature, the surface roughness and the friction coefficient increase, and the microhardness and the residual stress of the films decrease.     

Optical Properties of ZnFe2O4—SiO2 Granular Films Prepared by Radio—Frequency Magnetron Sputtering

We report on the optical properties of ZnFe2O4-SiO2 granular films prepared on quartz substrates by the radio-frequency magnetron sputtering method.Post-annealing was performed at different temperatures under flow oxygen atmosphere.The morphology and Structures of ZnFe2O4 nanoparticles were characterized by x-ray different line types in the optical absorption curves of ZnFe2O4-SiO2 granular films.The critical transition of line types occurs when ZnFe2O4 changes from amorphous to crystalline,and the transition temperature increases with the increasing content of ZnFe2O4.There is an obvious blueshift of the optical absorption edge of the granular films with the decreasing annealing temperature.     

Fluorescence Microscopy of Nanoscale Silver Oxide Thin Films

The experimental conditions for photoactivated intermittent fluorescence from nanoscale silver oxide were studied with fluorescence microscopy.Strong fluorescence was observed from the Ag2O particles with size of 10-20nm excited with both blue and green light .We observed the saturation of Photoexcitation with blue light and explained the experimental results using the model of agglomeration of silver atoms to form small clusters and the fluorescence of Ag2 and Ag3 clusters.     

基片温度对坡莫合金薄膜结构和磁电阻的影响

用磁控溅射方法制备了系列坡莫合金Ni80Fe20薄膜。利用X射线衍射、扫描电子显微镜和原子力显徽镜分析了薄膜的结构、晶粒取向、薄膜厚度、截面结构和表面形态。用4点探测技术测量了薄膜的电阻和磁电阻。结果表明：随衬底温度的升高，晶粒明显长大。膜内的缺陷和应力显著减小，而且增强了薄膜晶粒的[111]择优取向。结果表明，薄膜电阻率显著减小，而磁电阻显著增大。     

离子注入合成β-FeSi2薄膜的显微结构

采用MEVVA源(Metal Vapor Vacuum Arc Ion Source)离子注入合成β-FeSi2薄膜,用常规透射电镜和高分辨电镜研究了不同制备参数下β-FeSi2薄膜的显微结构变化. 研究结果表明:调整注入能量和剂量,可以得到厚度不同的β-FeSi2表面层和埋入层. 制备过程中生成的α,β,γ和CsCl型FeSi2相的相变顺序为γ-FeSi2→β-FeSi2→α-FeSi2,CsCl-FeSi2→β-FeSi2→α-FeSi2或β-FeSi2→α-FeSi2. 当注入参数增加到60kV,4×1017ions/cm2,就会导致非晶的形成,非晶在退火后会晶化为β-FeSi2相,相变顺序就变为非晶→β-FeSi2→α-FeSi2. 随退火温度逐渐升高硅化物颗粒逐渐长大,并向基体内部生长,在一定的退火温度下硅化物层会收缩断裂为一个个小岛状,使得硅化物/硅界面平整度下降. 另外,对于β-FeSi2/Si界面取向关系的研究表明,在Si基体上难以形成高质量β-FeSi2薄膜的原因在于多种非共格取向关系的并存、孪晶的形成以及由此导致的界面缺陷的形成.     

同步辐射光电子能谱表征MgO在GaAs（100）上淀积过程中的氧物种

用同步辐射光电子能谱表征了不同氧分压下通过热蒸发镁在ＧａＡｓ（１００）面制备氧经物超薄膜过程中的氧物种，结果表明表面氧物种的形式与镁氧配比有关，较高的氧分压下于形成活泼的分子离子等氧中间体，因此通过控制镁氧比可以制备高效的薄膜模型催化剂或适合于功能材料集成的规则氧化物过渡层，氧物种的形式可以通过能谱中不同的原子或分子轨道电子跃迁来有效地区分。     

纳米硅薄膜光吸收谱的研究

用恒定光电导法测量了纳米硅(其晶粒尺寸为3-5nm,晶态成分比X_c为45％—50％)薄膜在0.9—2.5eV范围的光吸收谱。分析了在不同光子能量范围可能存在的对光电导作主要贡献的几种光跃迁过程,以及随着X_c的增加,材料由非晶、微晶转变为纳米硅薄膜时光吸收谱的变化。发现纳米硅晶粒之间的界面区(平均厚度约为1nm)中载流子的跃迁及传输过程对整个范围的光吸收谱起主导作用。联系纳米硅的这种特殊结构解释了有关实验结果。 关键词：     

金属颗粒-半导体膜Cu:CdS的制备及结构研究

利用磁控溅射产生金属Cu团簇，同时蒸发半导体介质CdS，将Cu团簇包埋在CdS介质中，制备出金属颗粒 半导体膜．团簇大小可通过改变溅射气压控制．用TEM研究了嵌埋团簇的结构．分析表明：CdS很好地包埋了Cu团簇，都呈多晶结构；团簇尺寸在5—20nm，Cu晶格发生了膨胀，膨胀量在7%左右 关键词：     

薄膜界面粗糙对双晶摇摆曲线的影响

用X射线衍射动力学理论,模拟计算InP衬底上InGaAs/AllnAs超晶格和InGaAs单层膜的X射线双晶摇摆曲线,计算结果表明:薄膜界面粗糙对单层膜的衍射峰和超晶格的零级衍射峰影响较小,但却明显影响单层膜衍射干涉条纹和超晶格的±1级卫星峰,随着平均界面粗糙度的增大,单层膜衍射干涉条纹强度减弱并趋于消失;超晶格的±1级卫星峰变弱并逐渐展宽,理论计算的模拟双晶摇摆曲线与超晶格实验曲线比较表明:高质量匹配In_0.53Ga_0.47As(85?)/Al_{0.4 关键词：}