Thermalization time of thin metal film heated by short pulse laser

Based on the hyperbolic two-step heat conduction model, using the Laplace transform and numerical inverse transform method (Riemann-sum approximation method), the thermal behaviour of thin metal films has been studied during femtosecond pulse laser heating. Also the thermalization time, which is the time for the electron gas and solid lattice to reach thermal balance, has been studied in detail. The values of thermalization time for silver (Ag), gold (Au), copper (Cu) and lead (Pb) are obtained. The effects of material parameters of the thin metal film on the thermalization time are considered for the four kinds of metals by changing one of the parameters and regarding the other parameters as constant. For a typical metal material, the order of the thermalization time is of the order of hundreds of picoseconds. The thermalization time decays exponentially with the increase of phonon－electron coupling factor or electron gas thermal conductivity, and it increases linearly with the increase of the ratio of lattice heat capacity to electron gas heat capacity. However, the relaxation time of the electron gas has very little effect on the thermalization time.     

THE CLASSIFICATION OF NILPOTENT LEIBNIZ 3-ALGEBRAS

The notions of the nilpotent and the strong-nilpotent Leibniz 3-algebras are defined. And the three dimensional two-step nilpotent, strong-nilpotent Leibniz 3-algebras are classified.     

ZnO-SnO2透明导电薄膜的制备及性能研究

采用二步成胶工艺制备ZnO-SnO₂透明导电薄膜,应用X射线衍射、原子力显微镜、紫外-可见分光光度计、薄膜分析仪及四探针仪等对薄膜的结构、表面微观形貌、透过率和导电性能进行表征.结果表明,锌锡摩尔比为9/12,退火温度为500 ℃时,薄膜的透过率达90%,电阻率为3.15×10-3 Ω·cm.与其它工艺相比,二步成胶工艺所制备出的ZnO-SnO₂透明导电薄膜性能优异.     

手性碳量子点的制备及其应用

手性碳量子点(CQDs)因兼具优异的荧光性质、良好的生物相容性、较低的毒性、易于功能化以及手性特征等,在催化、检测和生物医学等领域具有广阔的应用潜力。目前,通过一步法或两步法制备的手性CQDs,已应用于手性催化、手性检测、高尔基体靶向成像、选择性调控酶和蛋白活性、选择性调控细胞能量代谢和促进植物生长等领域。然而,手性CQDs的发展初露头角,需进一步完善可控合成工艺,制备高荧光量子产率的长波长手性CQDs,使其在生物医学等领域绽放异彩。     

不等频两步激发Li蒸汽产生红外受激辐射特性研究

本文首次报道了利用不等频两步激发Li蒸汽,获得了五条红外受激辐射和串级辐射.并对受激辐射特性进行了研究.     

Computer-assisted optimization of mobile phase compositions and development distance selectivity in gradient two-step development high-performance thin-layer chromatography

A computer-assisted method is presented for optimization of mobile phase compositions and development distance in gradient two-step development HPTLC. The method is based on a system which can predict the final Rf values for gradient two-step development from values measured using five preliminary runs. The statistical scanning method is then used for optimization, using Rf difference as the selection criterion. The method was evaluated using a mixture of eight components. Excellent agreement was obtained between predicted and experimental results. Gradient two-step development HPTLC, mobile phase composition optimization, velopment distance optimizationde-     

两步离子交换玻璃光功分器的折射率分布

介绍了在用两步离子交换方法制作光功分器中，在高斯分布为初始条件下采用平均法求出非线性两步离子扩散方程的折射率分布，与实验测出的折射率分布符合得很好。该法尤其对单模光功分器求其折射率更为简单和实用。     

离子液体[bmim]PTSA的微波合成

近年来,随着绿色化学的兴起,离子液体作为一种新型的绿色溶剂已成为国内外科研工作者的研究热点之一.离子液体是由有机阳离子和无机阴离子组成的盐,可以根据需要控制阴阳离子的组成和结构,设计合成出不同特性的离子液体[1].     

nc-Ge/SiN_x多层膜材料的可调控非线性光学特性

采用等离子体增强化学气相沉积和后退火的方法制备了纳米锗/氮化硅(nc-Ge/SiN_x)多层薄膜。借助Raman光谱仪对其微结构进行表征,测得样品的晶化率大于46%。由样品的光吸收谱可知,nc-Ge的尺寸越小,其光学带隙越大。利用Z扫描技术对样品的非线性光学特性进行研究,以波长为1 064 nm、脉宽为25 ps的锁模激光作为激发光,测得样品的非线性折射率系数在10~(-10)cm~2/W数量级。实验结果表明,通过改变nc-Ge的尺寸可以使材料的非线性光学折射率由自散焦转变为自聚焦特性,而负的非线性折射率系数可归因于两步吸收产生的自由载流子散射效应。当激发光强增大时,在锗层厚度为6 nm的多层膜中同时存在两步吸收过程和饱和吸收过程。两种非线性光学吸收过程之间的竞争是样品呈现不同非线性光学特性的主要原因。     

碱/酸两步催化法制备耐候性SiO2增透膜的研究

以正硅酸乙酯(TEOS)为先驱体,采用碱/酸两步催化溶胶-凝胶法制备出一种兼具碱催化增透膜的高透过率和酸催化增透膜的良好耐摩擦性能的优点的SiO2增透膜。对酸碱催化SiO2相对比例及酸催化时水含量的系统研究表明,当酸催化SiO2的含量为50%时,增透膜综合性能最好,即具有高透过率和高耐摩擦性;当nH2O/nHCl=1∶0.0010时,增透膜的透过率最高。碱/酸两步催化法制备的增透膜与水的接触角仅为11.3°,本文进一步用六甲基二硅氧烷(HMDS)对增透膜表面进行了修饰,修饰后增透膜的接触角提高至52.5°,增透膜的疏水性及环境稳定性得到较大的提高。