费-托合成Co/ZrO2-Al2O3催化剂反应性能的研究

以ZrOCl2·6H2O和AlCl3为原料,采用共沉淀方法制得一系列不同ZrO2质量分数的ZrO2-Al2O3混合氧化物载体;并以该混合氧化物为载体,采用初湿浸渍法制得钴质量分数为12％的Co/ZrO2-Al2O3催化剂。XRD、NH3-TPD、TPR和原位IR等表征结果表明,随着混合载体中ZrO2质量分数的增加,载体比表面积先增加后减少,混合载体的平均孔径则小于单一氧化物ZrO2和Al2O3的平均孔径。ZrO2和Al2O3载体混合后会导致氧化物的比表面积和酸性增大并且有新的物相生成。当混合氧化物用作载体时,能够抑制载体表面金属钴的分散,改变催化剂的还原行为,降低催化剂对CO物种的吸附能力。CO加氢反应表明,与单一金属氧化物相比,钴负载ZrO2-Al2O3混合氧化物催化剂的加氢活性和重质烃选择性有所降低。     

Properties and Applications of Mixed Packing Capillary Electrochromatography

Mixed packing capillary electrochromatography (MP CEC) with the stationary phase comprising a physical mixture of strong cation exchange (SCX) phase and octadecysilyl (ODS) phase was developed. With the existence of a sulfonic acid group on the surface of SCX, not only could the electroosmotic flow (EOF) remain high at low pH, but also the hydrophilicity of the stationary phase was increased greatly, leading to broad adaptable ranges of both pH and organic modifier concentration in the mobile phase. At the same time, with the coexistence of C₁₈ on the surface of ODS, both the retention and the resolution of samples were improved. Accordingly, MP CEC combined the advantages of both SCX and ODS columns. Effects of operation parameters on EOF and the capacity factors of solutes as well as the retention mechanism of such a column were studied systematically. In addition, MP CEC columns were used in the analysis of strong polar solutes as well as for the high speed separation of acidic, basic, and neutral compounds in a single run.     

东南部欠发达地区县域城乡空间统筹发展的规划思考

山区县由于其特殊的空间条件和战略地位决定了其发展战略和规划建设的特殊性和复杂性.以位于浙江南部丽水境内的景宁畲族自治县为例,研究山区县域发展所面临的关键问题及经济、社会、城镇发展模式的抉择,从而理清发展战略规划的研究思路并提出空间规划对策,以期对山区县经济社会综合发展以及空间发展策略提供案例借鉴.     

K-Co-Mo-C催化剂的制备及其合成低碳醇的性能

 采用溶胶-凝胶法制备了含碳的K-Co-Mo-C催化剂,通过改变碳前驱体的添加量以获得不同的碳含量,测试了催化剂上合成气制混合醇的性能. 结果表明,适量的残留碳增加了催化剂中活性相的分散度,提高了合成醇的收率和选择性,但过量的碳导致烃的选择性增加而醇的选择性下降,这是由于随着碳前驱体添加量的增加,催化剂中的Mo物种更容易被还原成金属态. 与惰性气氛中焙烧的样品不同,空气中焙烧的样品中没有碳的存在,氧化物组分容易生成难以还原的物相,合成醇活性较低. 含碳量为2.8%的样品具有最大的比表面积和孔体积,同时也具有最高的醇收率和选择性. 惰性气氛中高温焙烧样品导致其合成醇活性明显降低,但同时高碳醇的选择性增加.     

AN ADAPTIVE UNSTRUCTURED TRI-TREE ITERATIVE SOLVER FOR MIXED FINITE ELEMENT FORMULATION OF THE STOKES EQUATIONS

An iterative adaptive equation solver for solving the implicit Stokes equations simultaneously with tri-tree grid generation is developed. The tri-tree grid generator builds a hierarchical grid structure which is mapped to a finite element grid at each hierarchical level. For each hierarchical finite element grid the Stokes equations are solved. The approximate solution at each level is projected onto the next finer grid and used as a start vector for the iterative equation solver at the finer level. When the finest grid is reached, the equation solver is iterated until a tolerated solution is reached. In order to reduce the overall work, the element matrices are integrated analytically beforehand. The efficiency and behaviour of the present adaptive method are compared with those of the previously developed iterative equation solver which is preconditioned by incomplete LU factorization with coupled node fill-in. The efficiency of the incomplete coupled node fill-in preconditioner is shown to be largely dependent on the global node numbering. The preconditioner is therefore tested for the natural node ordering of the tri-tree grid generator and for different ways of sorting the nodes.     

利用1H NMR探究混合离子型/非离子型表面活性剂临界胶束浓度降低的实质

利用¹H NMR技术研究了离子/非离子表面活性剂形成的二元混合体系,结果显示表面活性剂的混合导致各组分的临界胶束浓度（CMC）均比各自纯溶液有所降低,用吸附平衡理论清楚地解释了这个现象.通过定量分析,发现不同的表面活性剂混合使得其组分CMC降低的程度各异,可以理解为它们吸附于界面单分子吸附层上的分子之间相互作用的不同（相吸或相斥）引起的.由此揭示了"协同效应"的实质,可以为选择适当的表面活性剂类型和混合比例以达到预期的性能提供有力的参考.     

硅烯/dx2-y2+idxy混合波超导隧道结隧道输运性质研究

运用Blonder-Tinkham-Klapwijk(BTK)理论研究了硅烯/dx2-y2 +idxy 混合波超导隧道结的隧穿性质.研究发现:垂直施加的电场、超导配对势的方向角和两种混合波配对能隙的比值Δ1/Δ0 强烈地影响正常反射、Andreev反射和隧穿电导的值;当两种混合波的序参量比值较大时,隧道谱线在外加偏压E =Δ1 处出现谐振峰;系统的隧穿电导、正常反射幅和Andreev反射幅随超导方向角成周期性变化,变化周期为π/2;由于dxy-波的存在,通过改变外加电场可以对隧穿电流加以调控。     

绿色催化二氧化碳、炔丙醇和亲核试剂的三组分反应

近些年来,将CO₂转化为高附加值化学品受到广泛关注。其中,CO₂、炔丙醇和亲核试剂的三组分反应可用于制备用途广泛的羰基化合物,该方法具有步骤经济性、原子经济性等优点。由于CO₂分子具有热力学稳定性和动力学惰性,多数CO₂参与的化学反应在热力学上不支持。然而,CO₂、炔丙醇和双亲核试剂三组分反应是热力学有利的CO₂转化反应,实现了邻二醇或氨基醇和CO₂到环状碳酸酯以及2-噁唑啉酮的高效转化。本综述旨在于总结并讨论近年来CO₂、炔丙醇和亲核试剂三组分反应制备多种羰基化学物的主要进展。     

Effectiveness of Darcy-Forchheimer and nonlinear mixed convection aspects in stratified Maxwell nanomaterial flow induced by convectively heated surface

The effect of nonlinear mixed convection in stretched flows of rate-type non-Newtonian materials is described. The formulation is based upon the Maxwell liquid which elaborates thermal relation time characteristics. Nanofluid properties are studied considering thermophoresis and Brownian movement. Thermal radiation, double stratification, convective conditions, and heat generation are incorporated in energy and nanoparticle concentration expressions. A boundary-layer concept is implemented for the simplification of mathematical expressions. The modeled nonlinear problems are computed with an optimal homotopy scheme. Moreover, the Nusselt and Sherwood numbers as well as the velocity, nanoparticle concentration, and temperature are emphasized. The results show opposite impacts of the Deborah number and the porosity factor on the velocity distribution.     

Simultaneous impacts of MHD and variable wall temperature on transient mixed Casson nanofluid flow in the stagnation point of rotating sphere

A numerical analysis is provided to scrutinize time-dependent magnetohydrodynamics(MHD) free and forced convection of an electrically conducting non-Newtonian Casson nanofluid flow in the forward stagnation point region of an impulsively rotating sphere with variable wall temperature. A single-phase flow of nanofluid model is reflected with a number of experimental formulae for both effective viscosity and thermal conductivity of nanofluid. Exceedingly nonlinear governing partial differential equations(PDEs)subject to their compatible boundary conditions are mutated into a system of nonlinear ordinary differential equations(ODEs). The derived nonlinear system is solved numerically with implementation of an implicit finite difference procedure merging with a technique of quasi-linearization. The controlled parameter impacts are clarified by a parametric study of the entire flow regime. It is depicted that from all the exhibited nanoparticles,Cu possesses the best convection. The surface heat transfer and surface shear stresses in the x-and z-directions are boosted with maximizing the values of nanoparticle solid volume fraction ? and rotation λ. Besides, as both the surface temperature exponent n and the Casson parameter γ upgrade, an enhancement of the Nusselt number is given.