草酸根桥联Cr(Ⅲ)-Ni(Ⅱ)配合物的合成和磁性

Two new heteropolynuclear metal complexes ［Ni(phen)₂］₃［Cr(ox)₃］₂·8H₂O(1) and ［Ni(bipy)₂］₂［Cr(ox)₃］NO₃·4H₂O(2)(phen=1,10-phenanthroline, ox=oxalato, bipy=2,2-bipyridine) have been synthesized and characterized by elemental analyses, IR, TG-DTA and diffuse reflectance UV-VIS spectra. The temperature dependence of the magnetic susceptibilities of the complexes have been studied over the range 73.6～300K. The results show that ferromagnetic spin exchange interaction exist between Cr(Ⅲ) and Ni(Ⅱ) in the complex (1). The magnetic property of the complex(2) abides Curie law.     

包结物晶析法选择分离辛夷挥发油中1，8-枝叶素

We used 1,1,6,6-tetraphenylhexa-2,4-diyne-1,6-diol(A) as the host molecule to selectively recognize the component 1,8-cineole(B) in the volatile oil of Flos Magnoliae(Xin Yi). The inclusion com-pound (A B) was formed as crystalline, and the structure was confirmed by means of IR, ^1H NMR, and single crystal X-ray diffraction, with the 1:2 molar ratios of the host to the guest. The component 1,8-cineole(B) was selectively isolated from the inclusion compound(A B) by Kugelrohr vaccum technology, and then further characterized by IR, ^1H NMR and ^13C NMR. The whole components in the volatile oil of Flos Magnoliae (Xin Yi) and the isolation effect of 1,8-cineole isolated from inclusion crystals were analyzed by GC and GC-MS, respectively. The result indicate that the good isolation effect is given by the inclusion method, with purity and yield of the component 1,8-cineole(B) separated from the volatile oil of Flos Magnoliae are 100% and 85%, respectively.     

用钛系载体高效催化剂进行乙烯-丙烯-1-丁烯三元共聚合的研究 Ⅰ.聚合条件对共聚合反应的影响

用多组份改性钛系载体催化剂TiCl_4,Ti(OBu)_4/MgCl_2/Ethylbenzeate(EB)/φ_2SiCl_2/AlEt_3进行了乙烯-丙烯-1-丁烯三元共聚合的研究。考察了单体进料比、聚合温度,烷基铝浓度和催化剂浓度等条件对共聚合的影响。发现本催化剂对乙丙丁三元共聚合有极高的催化效率,聚合1h达8.6×10~4g共聚物/g-Ti。共聚合速率衰减符合动力学方程:R_s=R_s+(R_0—R_s)_e~(βs)。     

钯催化全氟及多氟碘化物与三乙胺的反应

Pullin等人曾对全氟碘代烷与三级胺的相互作用进行了研究,发现R_(?)I与NR_3能形成电荷转移络合物,即:R_(?)…I…NR_3。但此后却未见到有关反应的报道。我们发现在钯催化剂存在下,全氟碘化物与三乙胺能发生反应,反应条件较为温和,产物为氟代烷基烯基二乙基胺1。反应可能是在三乙胺中先产生一个双键,然后β碳原子接上一个全氟烷基。1的IR和NMR与Blanc报道的一致。化合物1经水解可得胺基烯酮2。在酸溶液中水解时,速度明显加快,而在碱溶液中,不仅不能加快水解速度,而且还有副反应发生。我们对化合物2进     

液膜法分离钒(Ⅳ)的研究

本文用P204-兰113A-煤油组成的滤膜体系处理钒(Ⅳ)的溶液,并考察了表面活性剂、载体、外相pH值、内相酸度、起始钒(Ⅳ)浓度以及乳水比等因素对分离的影响。     

Morphology Control over the Organic Nanoparticles of 1,3-Diphenyl-5-（9-anthryl）-2-pyrazoline

The organic nanoparticles of a blue-light-emitting molecule, 1,3-diphenyl-5-(9-anthryl)-2-pyrazuline, were prepared by reprecipitation method using acetonitrile as the solvent for the molecular precursor. Three morphologies, spherical, doughnut-shaped and cubic, could be observed on the silicon substrate forthe nanoparfides by the volume-controlled addition of acetonitrile. The evolution of particle morphology as a function of acetonitrile addition was attributed to the variation of the growth habits of the particles in the different environment. The nanoparticles exhibit the novel photoluminescence spectra as compared to those of monomer and the bulk crystals.     

N,N-二(2-苯并咪唑亚甲基)甲胺高氯酸盐的晶体和电子结构

合成了三齿配体N,N-二(2-苯并咪唑亚甲基)甲胺(MN3)的高氯酸盐.对该化合物进行了元素分析、紫外和红外表征;采用X射线衍射方法测定了该化合物的晶体结构,依据晶体结构数据使用G98程序对配体(MN3)进行了量子化学计算.     

[Co(pdmma)(ampy)Cl]2+体系--面式异构体的结构解析及其优势构型

合成了[Co(N-(2-吡啶基甲基)-N,N-二甲基乙二胺)(2-(氨基甲基)吡啶)Cl] [ZnCl4]体系的三个异构体,将配合物用H2ZnCl4结晶,1H NMR检测表明它们是标题体系中的异构体,并利用二维核磁共振技术与单晶X ray衍射法平行解析了——异构体的结构,确定其结构f2,结果显示结构中存在C-H…π相互作用．用量子化学从头计算方法,在赝势基组RHF／LANL2DZ的水平上对体系的十个可能的几何异构体(四个经式异构体和六个面式异构体)进行了结构优化及基态能量计算,f2’;f3;m3;m4四个异构体的基态能量比其他异构体低,其中f2’为最低．因此CH…π相互作用对含吡啶环的[CoN5 Cl]2 系配合物的异构体的选择性形成及其稳定性具有重要作用．     

一种新型可溶性高聚物负载手性配体的合成及其催化烯烃的不对称双羟化反应研究

在碱性条件下, 聚乙二醇单甲醚(HO\|OPEG\|OMe)与1,4-二氟蒽醌进行亲核单取代反应生成中间体F\|AQN-OPEG-OMe, 产率88%. F-AQN-OPEG-OMe与奎宁锂进行亲核取代反应, 以95.6%的产率得到新型手性配体QN\|AQN\|OPEG-Me. QN-QN\|OPEG-Me与OsO4原位配位生成的均相催化剂在4种烯烃的不对称双羟化反应中表现出较高的对映选择性(92%~99%e.e.)和化学产率(80%~94%). 催化活性和立体选择性与Sharpless手性配体(DHQ)2AQN相当. 反应结束后, 配体可用乙醚沉淀回收, 循环使用5次, 催化剂的催化活性和立体选择性无明显改变, 配体的回收率均在95%~97%之间.     

N,N-双(α-萘基-苯基)-4,4''''-联苯二胺纳米管的制备及其光谱行为

利用多孔氧化铝作模板采用熔融法成功制备了一种定向有序排列的有机小分子(NPB)纳米管,并用场发射扫描电镜(FESEM)、 X射线能量损失谱(EDX)、透射电子显微镜(TEM)和荧光显微镜对其进行了表征.发现该纳米管具有整齐的形貌和规整的尺寸.进一步的研究表明,多孔氧化铝模板的亲油亲水处理对能否成功地大量获得纳米管起到非常重要的作用.值得注意的是,在对不同尺寸纳米管材荧光光谱的测定中,可明确观察到材料光学性质的尺寸依赖性.