Bending of Composite Plates under Static and Dynamic Loading

The stationary bending of a two-dimensional elastic system of joined rectangular plates with different mechanical properties and boundary conditions is studied. A technique for solving the corresponding problem is proposed. It is based on approximate approaches in combination with a generalization of the force method. It is established that the static strain state of the system is essentially dependent on the difference between the elastic moduli of the constituent plates. It is also shown that with certain boundary conditions, the dependence of the first resonant frequency on the relative position of plates along the contact line is nonmonotonic__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 1, pp. 77–84, January 2005.     

An investigation of the electron density of a Jahn–Teller‐distorted CrII cation: the crystal structure and charge density of hexakis(acetonitrile‐κN)chromium(II) bis(tetraphenylborate) acetonitrile disolvate

In the crystal structure of the title homoleptic Cr^II complex, [Cr(CH₃CN)₆](C₂₄H₂₀B)₂·CH₃CN, the [Cr(CH₃CN)₆]²⁺ cation is a high‐spin d⁴ complex with strong static, rather than dynamic, Jahn–Teller distortion. The electron density of the cation was determined by single‐crystal X‐ray refinements using aspherical structure factors from wavefunction calculations. The detailed picture of the electronic density allowed us to assess the extent and directionality of the Jahn–Teller distortion of the Cr^II cation away from idealized octahedral symmetry. The topological analysis of the aspherical d‐electron density about the Cr^II cation showed that there are significant valence charge concentrations along the axial Cr—N axes. Likewise, there were significant valence charge depletions about the Cr^II cation along the equatorial Cr—N bonds. These charge concentrations are in accordance with a Jahn–Teller‐distorted six‐coordinate complex.     

静态顶空/气相色谱-质谱法同时测定化妆品中22种有毒挥发性有机溶剂残留

以2015版《化妆品安全技术规范》中规定的常见禁用及限用有毒挥发性有机溶剂为研究对象,建立了静态顶空/气相色谱-质谱法(SHS/GC-MS)同时测定化妆品中22种有毒挥发性有机溶剂(VOC)(二氯甲烷、顺式-1,2-二氯乙烯、反式-1,2-二氯乙烯、2-氯-1,3-丁二烯、三氯甲烷、1,2-二氯乙烷、苯、四氯化碳、三氯乙烯、甲苯、四氯乙烯、氯苯、乙苯、三溴甲烷、间二甲苯、对二甲苯、苯乙烯、邻二甲苯、异丙苯、1,4-二氯苯、1,2-二氯苯、六氯丁二烯)残留的检测方法。试样在80℃下30 min静态顶空,经DB-1柱分离后,采用选择离子监测模式(SIM)进行定性定量分析。优化了顶空、色谱和质谱参数,结果表明:22种VOC在0.5~50 ng/m L浓度范围内均呈良好的线性关系,相关系数均大于0.99,在1.0,2.0,5.0 ng/m L 3个浓度加标水平下的平均回收率为80.3%~102.7%,相对标准偏差(RSD,n=6)为6.4%~9.9%,检出限为0.2~5.0 ng/g。结果表明,该方法简便、灵敏、准确,具有良好的重现性和稳定性,适合于化妆品中22种VOC残留的筛查和确证检测。     

工程结构静力分析和屈曲分析程序系统DDJTJQ及其应用

DDJTJQ是一个国内开发的组合结构静力分析和屈曲分析有限元程序系统,自1986年通过技术鉴定以来又有了许多发展。本文介绍该程序系统的功能和特点、求解能力以及在不同工程领域结构分析中的应用。     

光纤陀螺随机游走系数的分析研究

分析了产生随机游走误差的机理,分别采用有关标准和Allan方差进行了随机游走系数的分析和计算。结果表明:随机游走系数是衡量光纤陀螺噪声水平的重要指标,其值的大小体现了陀螺的极限精度。采用Allan方法表述光纤陀螺的静态指标,物理概念清晰,方法简便。     

T300/648迭层板接头挤压疲劳损伤参数的选择与测定

本文对碳纤维增强复合材料迭层板(C.F.R.P)接头在不同环境条件下的挤压疲劳损伤扩展进行了实验研究.并根据“剩余强度,剩余刚度”理论和“疲劳模量”概念,讨论了接头的刚度下降和强度变化.由此提出了“损伤参数”D的定义和测量方法;并对损伤试件,进行了X射线检测分析,验证了累积损伤的扩展.     

Extraction-condensation method for solving large sets of equations in FE analysis

In static and dynamic analysis of a large complex structure, one may merely be interested in the stresses and displacements at some important locations. A new solution technique for structural analysis with FEM is proposed in this paper by which those important unknowns are separated from the rest. In static analysis the important unknows can be found directly. In dynamic analysis all mass and exciting forces can be condensed onto a small number of predetermined points in order to make the dynamic analysis much simplified. A large scale problem can be solved with a small capacity computer quickly.     

悬索大挠度风振响应的有限体积法分析

基于Lagrange原理,建立了一套新的悬索大挠度动力特性和动力响应分析的有限体积法列式,推导了结点力向量、质量矩阵和单元刚度矩阵的显式表达式。该列式的一个显著特点是直接利用工程应变定义结构变形,其物理意义明确,列式简单,适用于各种垂度和荷载情况的悬索大挠度动力分析。实例动力特性和随机风振响应分析表明,该有限体积列式不仅计算效率高,而且具有良好的计算精度。     

结构静动力屈曲问题研究进展

近几十年来，结构的静动力屈曲问题一直是力学工作者极为关注的一个前沿课题．本文总结和综述了这一研究领域的几个基本问题：屈曲问题的分类、动态屈曲问题的特点及其特征量；介绍了屈曲问题的处理方法和目前已取得的成果；总结评述了人们关心的热点问题；屈曲问题的模型分析和实验技术、动态屈曲判别准则．     

航空发动机压气机叶片振动频率与温度的关系

以某型航空发动机压气机第六级叶片为例，研究了温度对叶片振动频率的影响。发现由于温度的升高导致了材料弹性模量的下降，而弹性模量的下降又导致了叶片在发动机一定的转速范围内，除一阶振动外，其余各阶振动的动频均小于静频，因此与通常的工程处理方法不同，研究压气机叶片的动频时，应考虑温度的影响。