An investigation of the electron density of a Jahn–Teller‐distorted CrII cation: the crystal structure and charge density of hexakis(acetonitrile‐κN)chromium(II) bis(tetraphenylborate) acetonitrile disolvate

In the crystal structure of the title homoleptic Cr^II complex, [Cr(CH₃CN)₆](C₂₄H₂₀B)₂·CH₃CN, the [Cr(CH₃CN)₆]²⁺ cation is a high‐spin d⁴ complex with strong static, rather than dynamic, Jahn–Teller distortion. The electron density of the cation was determined by single‐crystal X‐ray refinements using aspherical structure factors from wavefunction calculations. The detailed picture of the electronic density allowed us to assess the extent and directionality of the Jahn–Teller distortion of the Cr^II cation away from idealized octahedral symmetry. The topological analysis of the aspherical d‐electron density about the Cr^II cation showed that there are significant valence charge concentrations along the axial Cr—N axes. Likewise, there were significant valence charge depletions about the Cr^II cation along the equatorial Cr—N bonds. These charge concentrations are in accordance with a Jahn–Teller‐distorted six‐coordinate complex.     

Influence of Ga/(Ga + In) grading on deep‐defect states of Cu(In,Ga)Se2 solar cells

The benefits of gallium (Ga) grading on Cu(In,Ga)Se₂ (CIGS) solar cell performance are demonstrated by comparing with ungraded CIGS cells. Using drive‐level capacitance profiling (DLCP) and admittance spectroscopy (AS) analyses, we show the influence of Ga grading on the spatial variation of deep defects, free‐carrier densities in the CIGS absorber, and their impact on the cell's open‐circuit voltage V_oc. The parameter most constraining the cell's V_oc is found to be the deep‐defect density close to the space charge region (SCR). In ungraded devices, high deep‐defect concentrations (4.2 × 10¹⁶cm^–3) were observed near the SCR, offering a source for Shockley–Read–Hall recombination, reducing the cell's V_oc. In graded devices, the deep‐defect densities near the SCR decreased by one order of magnitude (2.5 × 10¹⁵ cm^–3) for back surface graded devices, and almost two orders of magnitude (8.6 × 10¹⁴ cm^–3) for double surface graded devices, enhancing the cell's V_oc. In compositionally graded devices, the free‐carrier density in the absorber's bulk decreased in tandem with the ratio of gallium to gallium plus indium ratio GGI = Ga/(Ga + In), increasing the activation energy, hindering the ionization of the defect states at room temperature and enhancing their role as recombination centers within the energy band. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Dark Fermentative Hydrogen Production from Neutralized Acid Hydrolysates of Conifer Pulp

Concentrated acid hydrolysis of cellulosic material results in high dissolution yields. In this study, the neutralization step of concentrated acid hydrolysate of conifer pulp was optimized. Dry conifer pulp hydrolysis with 55?% H₂SO₄ at 45?°C for 2?h resulted in total sugar yields of 22.3?C26.2?g/L. The neutralization step was optimized for solid Ca(OH)₂, liquid Ca(OH)₂ or solid CaO, mixing time, and water supplementation. The highest hydrogen yield of 1.75?mol?H₂/mol glucose was obtained with liquid Ca(OH)₂, while the use of solid Ca(OH)₂ or CaO inhibited hydrogen fermentation. Liquid Ca(OH)₂ removed sulfate to below 30?mg SO₄ ^2?/L. Further optimization of the neutralization conditions resulted in the yield of 2.26?mol?H₂/mol glucose.     

Potential‐induced optimization of ultra‐thin rear surface passivated CIGS solar cells

Ultra‐thin Cu(In,Ga)Se₂ (CIGS) solar cells with an Al₂O₃ rear surface passivation layer between the rear contact and absorber layer frequently show a “roll‐over” effect in the J–V curve, lowering the open circuit voltage (V_OC), short circuit current (J_SC) and fill factor (FF), similar to what is observed for Na‐deficient devices. Since Al₂O₃ is a well‐known barrier for Na, this behaviour can indeed be interpreted as due to lack of Na in the CIGS absorber layer. In this work, applying an electric field between the backside of the soda lime glass (SLG) substrate and the SLG/rear‐contact interface is investi‐gated as potential treatment for such Na‐deficient rear surface passivated CIGS solar cells. First, an electrical field of +50 V is applied at 85 °C, which increases the Na concentration in the CIGS absorber layer and the CdS buffer layer as measured by glow discharge optical emission spectroscopy (GDOES). Subsequently, the field polarity is reversed and part of the previously added Na is removed. This way, the J –V curve roll‐over related to Na deficiency disappears and the V_OC (+25 mV), J_SC(+2.3 mA/cm²) and FF (+13.5% absolute) of the rear surface passivated CIGS solar cells are optimized. (© 2014 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Synthesis and photochemistry of 1-iodocyclohexene: influence of ultrasound on ionic vs. radical behaviour

Simultaneous application of UV light and ultrasonic irradiation to a reaction mixture containing 1-iodocyclohexene is reported. The irradiation of 1-iodocyclohexene in methanol was carried out with or without addition of zinc. The effect of ultrasound or mechanical stirring on this solid-liquid system was also compared. The irradiation of 1-iodocyclohexene in methanol in the presence of zinc increases the yield of the nucleophilic trapping product, compared with the yield after irradiation in the absence of zinc. The photodegradation of 1-iodocyclohexene was slightly accelerated after addition of zinc. A rapid formation of radical product was accompanied by substantial decrease of 1-iodocyclohexene after application of ultrasound and irradiation without the zinc. The ultrasound significantly affects the photobehaviour of this reaction, predominantly its radical route. The joint application of ultrasound and zinc contributes positively to the production of radical and ionic products. The sonochemical stirring is more effective than mechanical stirring.     

Cationic poly(methacryl oxyethyl trimethylammonium) and its poly(ethylene glycol)‐grafted analogue as capillary coating materials in electrophoresis

Cationic polyelectrolytes were synthesized and used as semipermanent coating materials for capillaries in electrophoresis. The polyelectrolytes used were a homopolymer of poly(methacryl oxyethyl trimethylammonium chloride) (PMOTAC) and its poly(ethylene glycol) (PEG)‐grafted analogue. Two PMOTAC polyelectrolytes, with molar masses of 85,000 and 300,000 g/mol, and PEG‐grafted PMOTAC with a molar mass of 280,000 g/mol were synthesized and then characterized by size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Attachment of the polyelectrolytes to the wall of the fused silica capillary for electrophoresis caused the electroosmotic flow (EOF) to reverse. The polyelectrolyte coatings were tested over the pH range 2–11 at different buffer ionic strengths, and the most stable and strongest anodic EOFs were obtained at acidic pH values with low ionic strength buffers. Between runs the capillary is merely rinsed for 2 or 3 min with the background electrolyte solution. With the PMOTAC coatings at pH values ≤5, the RSDs of the EOFs were less than 2.9% after 60 injections. The effects of the molar mass of the polycation and of PEGylation of PMOTAC on the interactions between the polycations and basic proteins were studied at acidic pH values. The differences in the effective electrophoretic mobilities, resolution values, and plate numbers of the proteins with the different coatings were due to the EOF, as demonstrated through calculations of reduced mobilities, relative resolution values, and relative plate numbers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2655–2663, 2007     

The limits of the concept of affinity

Summary The last incarnation of the doctrine of affinities, i.e. the electrodualistic chemistry, could not resist the confrontation with the experience in organic chemistry. A new concept is proposed, in order to express the facts and make them intelligible: the arrangement of atoms. The concept is analysed and its adequacy is valued with regard to that of affinity.     

Enhancement of two-photon absorption cross-section and singlet-oxygen generation in porphyrins upon beta-functionalization with donor-acceptor substituents

The microwave-enhanced synthesis, comparative singlet oxygen sensitization efficiency, and nonlinear optical characterization of a new beta-functionalized porphyrin and its copper complex are described. We show that the introduction of a donor-acceptor push-pull conjugated fragment in the beta position strongly perturbs the porphyrin electronic structure leading to a remarkable one- and two-photon NIR absorption enhancement.     

Pentaerythrityltetramine scaffolds for solid-phase combinatorial chemistry

Straightforward synthesis for two pentaerythrityltetramine precursors, 2,2-bis(azidomethyl)propane-1,3-diamine (1) and 2-[N-(allyloxycarbonyl)aminomethyl]-2-azidomethylpropane-1,3-diamine (2), has been described. Both propane-1,3-diamines have been attached by reductive amination to a solid-supported backbone amide linker derived from 4-(4-formyl-3,5-dimethoxyphenoxy)butyric acid. The presence of the two methoxy substituents on the linker is essential to avoid cross-linking between two linkers. The remaining free primary amino group of the propane-1,3-diamine moiety may then be selectively acylated with an appropriately protected amino acid using conventional N,N-dicyclohexylcarbodiimide/1-hydroxybenzotriazole (DCC/HOBt) activation without any interference by the secondary amino function. The latter group may be subsequently acylated by an anhydride method. Sequential reduction of the azido group and removal of the allyloxycarbonyl protection from 2 allow further coupling of two different amino acids, and hence, this handle may be utilized in construction of branched structures containing four different amino acids or peptides. Solid-supported 1 may, in turn, be used for the synthesis of similar constructs containing two identical branches. It is worth noting that no acid-labile protecting groups are required in this approach, and hence, this dimension may be saved for the cleavage of the linker. The applicability of the scaffolds to library synthesis has been demonstrated by preparation of 11 pentaerythrityl-branched tetra- and octapeptides.     

ATR-FTIR imaging for the analysis of organic materials in paint cross sections: case studies on paint samples from the National Gallery, London

The potential of attenuated total reflection Fourier transform infrared (ATR-FTIR) imaging for the characterisation of the chemical components of paint cross sections from old master paintings was investigated. Three cross sections were chosen to cover a variety of the analytical problems encountered in samples from paintings. The binding medium and degradation products in a green paint sample from a fifteenth-century Florentine painting were imaged, as well as a thin layer within a cross-section from a fifteenth-century German painting, and multiple thin surface coatings on a painting of the 1760s by Peter Romney. The application of chemometric methods for further analysis of the large data set generated for each sample was also explored. The study demonstrated the advantages of ATR-FTIR imaging, which allowed images to be obtained with high spatial resolution (ca. 3-4 microm) without the need to microtome the sample. The gain in sensitivity in detecting trace materials and the information derived from the location of these compounds in the sample was especially valuable, improving interpretation of the FTIR analysis and extending knowledge of the sample composition beyond that obtainable with other analytical techniques.