单分子光子源光子统计的非平衡探测

研究了在Hanbury Brown Twiss探测方式下，非平衡探测系统对光子统计测量的影响。通过记录2个单光子计数器响应的单分子光子源输出的每一个事件，分析具有泊松统计背景的实际单分子光子源的光子统计特性，讨论并给出了非平衡探测系统的单分子光子源Mandel参数。研究表明：非理想的50／50分束器、非理想的线性传输效率和非理想的探测器都会使单分子光子源Mandel参数的实际测量结果小于平衡系统的Mandel参数，最后给出了单分子光子源Mandel参数的非理想探测的校正表达式。     

掺Eu3+硅基材料的发光性质

通过溶胶－凝胶技术制备了掺Eu^3 的硅基材料并测试了其三维荧光光谱、激光谱和发射光谱，结果显示，最佳激发波波长为350nm,最强荧光波长为620nm；在350nm光激发下的发射光谱显示Eu^3 的特征发射光谱，产生4条谱带，分别是577nm(^5D0-^7F0)，588nm(^5D0-^7F1),596nm(^5D0-^7F1)和610nm(^5D0-^7F2)。     

Propagation of the kurtosis parameter of Hermite-cosh-Gaussian beams

Starting from the propagation equation of Hermite-cosh-Gaussian (HChG) beams and the intensity moments definition, an analytical expression for the propagation of the kurtosis parameter of unapertured HChG beams passing through paraxial optical ABCD systems is derived and illustrated numerically. Special interesting cases are discussed, in particular, the kurtosis parameter of HChG beams at the waist plane is obtained readily from our general propagation expression.     

Oblique reflection of shock waves from rigid porous materials

A study to determine the general gas dynamic behaviour associated with the impact of a shock wave on a porous wedge has been undertaken. A number of interesting features are noted. The pattern of wave reflection is shown to be significantly affected by the inflow of gas into the wedge. This has the effect of reducing the triple point trajectory angle for cases of Mach reflection and for strongly reducing the reflection angle in regular reflection. The permeability of the wedge has a significant effect on the strength of the reflected wave and in some cases this wave can be attenuated to the extent that it is almost eradicated. Pressure measurements taken under the wedge are characterized by oscillations which are of similar shape, for a given wedge, over a range of shock wave Mach numbers. It is shown that the wave transmitted into the wedge is attenuated to varying degrees depending on the material properties, and that for weak incident waves the mean propagation velocity can be less than the sound speed in the pore fluid. Photographs taken using a specially constructed wedge which allows the transmitted wave to be visualised, show that the transmitted wave is nearly plane.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.     

CSR外靶实验终端中子流测量的模拟

随着兰州重离子加速器冷却储存环(HIRFL-CSR)外靶实验终端中子墙的建立, 为实验测量高能中子提供了机遇. 为确定CSR外靶实验终端对中子流测量的可行性, 基于BUU理论模型分别对对称系统(Ni+Ni, Pb+Pb)和非对称系统(Pb+Ni)进行了模拟计算, 发现当系统能量达到几百MeV/u时, 中子流信号相当明显, 并与碰撞参数有明显的依赖关系. 模拟结果表明, 在前角20°的覆盖范围内, 可以较好地实现中子流测量所需要的反应平面确定及碰撞参数选择. 对双击事件及其对中子流的影响进行了简单的讨论.     

On the deformation and fracture of porous materials

The constitutive behavior of porous materials (including the yield loci, the void growth rate, the macro stress-strain relation and the strain to localization instability) is examined based on the lower bound approach proposed by the present authors. These results are then compared with the experimental and the finite element results as well as those predicted by Gurson's equations. Emphasis is placed on approaching the real behavior from the upper and the lower bound analysis. Calculation is also made on the influence of void nucleation on the critical strain to instability and a modified strain-controlled nucleation criterion is proposed. Finally the instability and fracture of AISI4340 steel in plane strain tension is examined and comparison is made between theoretical and experimental results.     

低噪音摩阻复台材料影响因素的探讨

采用动态粘弹谱仪（ＤＤＶ）、电子扫描显微镜（ＳＥＭ）和摩擦试验机等对影响摩阻复合材料制动噪音的因素进行了探讨。结果表明，摩阻材料基体的合理改性以提高其损耗角正切ｔａｎδ对减少振动、降低噪音行之有效。同时对传统解决噪音的方法，如添加固体润滑剂、橡胶共混等进行了分析比较。     

A STUDY OF J-INTEGRAL OF THE ORTHOTROPIC COMPOSITE MATERIAL

ＡＳＴＵＤＹＯＦＪ－ＩＮＴＥＧＲＡＬＯＦＴＨＥＯＲＴＨＯＴＲＯＰＩＣＣＯＭＰＯＳＩＴＥＭＡＴＥＲＩＡＬＷａｎｇＡｉ－ｑｉｎ（王蔼勤）；ＦｅｎｇＢａｏ－ｌｉａｎ（冯宝莲）；ＹａｎｇＷｅｉ－ｙａｎｇ（杨维阳）（ＴａｉｙｕａｎＨｅａｖｙＭａｃｈｉｎｅｒｙ．...     

三维Minkowski空间中的曲面及其可积性

利用可积系统的思想,借助三维Minkowski空间L3的矩阵模型,研究了L3中具有调和逆平均曲率的类空曲面和洛伦兹调和逆平均曲率类时曲面的可积性及其形变.     

一种检验定性指标的有效方法

介绍了一种检验定性指标的有效方法,可用于确定产品的合格率和评价检验人员的检验水平。用该方法分析了某厂产品的一项实际指标,合格率为91 4%,还对该厂10名检验员的检验水平作了客观的评价。