The significance of changes in Mytella falcata (Orbigny, 1842) gill filaments chronically exposed to polluted environments

The impact of pollutants in an organism can be observed by changes in functional complexity at different levels. Bivalve gills are suitable for histopathological analysis because of their structure and function. This study aimed at examining the morphology of Mytella falcata gill filaments from three sites in the Santos estuary (São Paulo, Brazil) with different levels of environmental degradation to identify possible changes in gill structure and discuss the significance of these alterations. For this purpose, histological, histochemical and ultrastructural techniques were used. The filaments of animals from site A (less impacted site) were intact, while in sites B and C, pathological changes were observed, such as: detachment of the epithelium in the intermediate zone, morphological changes of this epithelium, inflammatory process, increase in the number of mucous cells and cell turnover processes. These results suggest that the related changes are an attempt to prevent the entrance of pollutants through gill filaments into the entire organism and that cell turnover is the final way to compensate cell injury.     

氧等离子体处理对纳米二氧化硅溶胶涂覆高强、高模聚乙烯纤维拉伸性能的影响

基于艾琳方程,提出用于定量分析纤维表面和纳米涂覆层间的纳米界面结构的理论模型.实验结果表明,纤维高分子链段受力塑性变形时,纳米界面结构内纳米微粒阻碍其形貌变化产生热激活体积,该热激活体积是纳米界面结构性能的重要表征;氧等离子体处理对纳米二氧化硅溶胶涂覆高强、高模聚乙烯纤维有增韧作用.由不同处理样品的扫描电子显微镜图片和傅里叶变换红外光谱曲线对比分析可知,经氧等离子体处理纳米二氧化硅溶胶涂覆高强、高模聚乙烯纤维的纳米涂覆层纳米颗粒分布均匀,纳米颗粒还填补纤维表面微观缺陷,活性官能团被引入到纤维表面. 关键词： 激活体积 氧等离子体 高强、高模聚乙烯纤维 纳米界面结构     

Transport by Molecular Motors in the Presence of Static Defects

The transport by molecular motors along cytoskeletal filaments is studied theoretically in the presence of static defects. The movements of single motors are described as biased random walks along the filament as well as binding to and unbinding from the filament. Three basic types of defects are distinguished, which differ from normal filament sites only in one of the motors’ transition probabilities. Both stepping defects with a reduced probability for forward steps and unbinding defects with an increased probability for motor unbinding strongly reduce the velocities and the run lengths of the motors with increasing defect density. For transport by single motors, binding defects with a reduced probability for motor binding have a relatively small effect on the transport properties. For cargo transport by motors teams, binding defects also change the effective unbinding rate of the cargo particles and are expected to have a stronger effect.     

一种节状纳米碳纤维的CVD生长

介绍了以发泡Ni为催化剂、用CVD法生长节状纳米碳纤维的工艺过程,讨论了工艺参数对生成样品的产率和形貌的影响,同时还探讨了该样品的生长机理。认为催化剂的不同晶面分别有利于烃类气体的吸附解离或碳的沉积,因此催化剂颗粒的原始形貌影响了不同开貌的碳纤维生长。     

Triggering and guiding of high voltage discharge by using femtosecond laser filaments with different parameters

This paper demonstrates the triggering and guiding of the stationary high voltage (HV) discharges at 5--40 kV by using plasma filaments generated by femtosecond laser pulses in air. A significant reduction of the breakdown voltage threshold due to the pre-ionization of the air gap by laser filamentation is observed. The discharge experiments are performed by using laser pulses with different energy from 15--60 mJ. The electron density of filaments is detected by sonography method. The influence of the electron density of laser filaments on the triggering and guiding HV discharge is experimentally investigated. The results have shown that the behaviour of plasma filaments can strongly affect the efficiency of triggering and guiding HV discharge.     

Interaction of light filaments in air

This paper analytically investigates the interaction of light filaments generated by a femtosecond laser beam in air. It obtains the Hamiltonian of a total laser field and interaction force between two filaments with different phase shifts and crossing angles. The property of the interaction force, which leads the attraction or repulsion of filaments, is basically dependent on the phase shift between filaments. The crossing angle between two filaments can only determine the magnitude of the interaction force, but does not change the property of the force.     

Self-similar vortex reconnection

As shown by Crow in 1970, the evolution of two almost parallel vortex filaments with opposite circulation exhibits a long-wave instability. Ultimately, the symmetric mode increases its amplitude reconnecting both filaments and ending into the formation of an almost periodic structure of vortex rings. This is a universal process, which appears in a wide range of scales: from the vortex trails behind an airplane to a microscopic scale of superfluids and Bose–Einstein condensates. In this paper, I will focus on the vortex reconnection for the latter case by employing Gross–Pitaevskii theory. Essentially, I focus on the well-known laws of interaction and motion of vortex filaments. By means of numerical simulations, as well as theoretically, I show that a self-similar finite-time dynamics manifests near the reconnection time. A self-similar profile is selected showing excellent agreement with numerical simulations.     

Dynamics of Filament Formation in Laser Produced Collisional Magnetoplasma

The paper presents an investigation of growth dynamics of spike in a collisional magneto plasma in the presence of externally applied magnetic field. We have set up and solved the non‐linear differential equations for growth and width of the laser spikes. We have considered the mechanism of nonuniform heating of carriers along the wavefront which is important in collisional plasmas. The effect of intensity of main beam and magnetic field on growth dynamics of spikes is studied (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)