氦等离子体处理对纳米二氧化硅溶胶涂覆T300碳纤维拉伸性能的影响

氦等离子体处理纳米二氧化硅溶胶涂覆T300碳纤维能构造出特定空间结构形态的纳米涂覆层.扫描电子显微镜照片显示,经氦等离子体处理后纳米二氧化硅溶胶涂覆T300碳纤维的纳米涂覆层在纤维表面分布均匀,起到填补纤维表面微观缺陷的功能.X射线光电子能谱及傅里叶变换红外光谱显示,纤维表面被引入了活性官能团,纳米二氧化硅涂覆层与碳纤维间有表面激活反应.形成纳米界面结构的T300碳纤维表面与纳米二氧化硅涂覆层间的相互作用符合艾琳方程,利用热激活体积可以对其相互作用进行定量分析.拉伸试验表明,屈服塑性变形导致纳米界面结构热激活,纳米微粒阻碍碳纤维表面大分子链形貌变化的热激活体积是纳米界面结构性能的重要表征. 关键词： 激活体积 溶胶涂覆 氦等离子体 纳米界面结构     

聚乙烯/银纳米颗粒复合物的分子动力学模拟研究

通过分子动力学模拟对聚乙烯/银纳米颗粒复合物的结构、极化率和红外光谱、热力学性质、力学特性进行计算, 分析其随模拟温度和银颗粒尺寸的变化规律. 模拟结果表明: 聚乙烯/银纳米颗粒复合物为各向同性的无定形结构, 温度升高可提高银纳米颗粒的分散均匀性; 银纳米颗粒表面多个原子层呈现无定形状态, 并在银颗粒和聚乙烯基体的界面形成电极化层, 界面区域随颗粒尺寸和温度的增加分别减小和增加; 与聚乙烯体系相比, 聚乙烯/银纳米颗粒复合物的极化率高很多, 且随温度的升高和银颗粒尺寸的减小而增大; 银颗粒尺寸直接影响界面电偶极矩的强度和振动频率, 红外光谱峰强度和峰位随颗粒尺寸发生变化; 聚乙烯/银纳米颗粒复合物具有比聚乙烯体系更高的等容热容和与聚乙烯体系相反的负值热压力系数, 热容随颗粒尺寸的变化较小, 但随温度的升高而明显减小, 具有显著的温度效应; 热压力系数随温度的变化较小, 但随颗粒尺寸的增加而减小, 具有明显的尺度效应, 温度稳定性更好; 聚乙烯/银纳米颗粒复合物的力学特性表现出各向同性材料的弹性常数张量, 具有比聚乙烯体系更高的杨氏模量和泊松比, 并且都随温度的升高和银颗粒尺寸的增大而减小, 加入银纳米颗粒可有效改善聚乙烯的力学性质. 关键词： 分子动力学模拟 聚合物纳米复合物 纳米颗粒     

等离子体结合六甲基二硅胺烷处理提升增透膜抗真空污染性能研究

本文采用溶胶-凝胶法制备了SiO₂增透膜,然后对其进行等离子体结合六甲基二硅胺烷（HMDS）表面改性处理。研究了后处理改性对增透膜表面形貌、微观结构、光学性能及激光损伤性能的影响规律,获得了抗真空有机污染的二氧化硅增透膜。结果表明,增透膜在采用等离子体结合HMDS表面改性处理后,膜层收缩、粗糙度下降、极性羟基等有机基团含量减少;两步后处理改善了增透膜膜层结构和光学性能,显著提高了膜层疏水能力和真空条件下的抗污染性能,并且对溶胶-凝胶二氧化硅增透膜的高损伤阈值属性不产生影响。     

用SAXS和XRD方法研究Ti02纳米颗粒微观结构

用溶胶一凝胶方法制备了TiO2纳米样品.并对该样品在300℃到800℃温度区域进行了退火处理.应用同步辐射x射线粉未衍射(XRD)方法研究了经不同热处理温度的TiO2纳米颗粒的结构相变.应用同步辐射小角x射线散射(SAXS)方法研究了TiO2纳米颗粒的表面分形与界面特性.得到纳米颗粒粒度与退火温度的变化规律,讨论r表面界面特征与相变的关系.     

具有可调谐的LSPR和SERS性能的“爆米花”状Au@Ag核壳超结构的制备（英文）

本文通过使用多巴胺二硫代氨基甲酸(DDTC)作为还原剂来控制银纳米颗粒以异相成核的生长模式在金立方表面进行生长,合成出"爆米花"状的金银纳米超结构。这种结构的纳米颗粒在可见光区表现出可调谐的等离子体共振特性,并且通过改变硝酸银的浓度能够精细的调节银层的厚度。此外,使用液液界面自组装技术将纳米颗粒组装成单层膜,然后将结晶紫作为探针分子来研究纳米颗粒的表面增强拉曼散射特性(SERS)和银层厚度之间的依赖关系。并系统的研究了三种激发波长对SERS基底的响应。结果表明"爆米花"状的金银核壳超结构具有可调节的局域表面等离子体共振(LSPR)和SERS特性,在太阳能电池、催化、化学传感等领域具有广阔的应用前景。     

溶胶-凝胶法制备疏水性自组装SiO2薄膜

 以正硅酸乙酯（TEOS）和六甲基二硅氮烷（HMDS）为前驱体,研究了引入聚乙烯吡咯烷酮（PVP）对膜层的影响,在碱催化条件下制备了改性的二氧化硅溶胶,并采用提拉涂膜的方法在石英基底上涂膜。对不同组分的薄膜,先经热处理或紫外辐照处理,然后用十八烷基三氯硅烷（OTS）/甲苯溶液对膜层表面进行化学修饰,制备出疏水性能良好的纳米二氧化硅自组装薄膜,分析了不同后处理方法对膜层透过率、接触角、膜层表面微观形貌和激光损伤阈值影响。实验结果表明：溶胶中加入PVP提高了膜层的平整度,经OTS改性后膜层疏水性和激光损伤阈值均得到提高。     

用SAXS和XRD方法研究TiO2纳米颗粒微观结构

用溶胶-凝胶方法制备了TiO₂纳米样品,并对该样品在300℃到800℃温度区域进行了退火处理.应用同步辐射X射线粉末衍射(XRD)方法研究了经不同热处理温度的TiO₂纳米颗粒的结构相变.应用同步辐射小角X射线散射(SAXS)方法研究了TiO₂纳米颗粒的表面分形与界面特性.得到纳米颗粒粒度与退火温度的变化规律,讨论了表面界面特征与相变的关系. 关键词： X射线小角散射 X射线衍射 2纳米颗粒')" href="#">TiO₂纳米颗粒     

利用小角X射线散射技术研究组分对聚酰亚胺/Al2O3杂化薄膜界面特性与分形特征的影响

采用溶胶-凝胶方法制备无机纳米杂化聚酰亚胺(PI),应用同步辐射小角X射线散射(SAXS)方法研究不同组分杂化PI薄膜的界面特性与分形特征.研究结果表明:散射曲线不遵守Porod定理,形成负偏离,说明薄膜中有机相与Al₂O₃纳米颗粒间存在界面层,界面层厚度在0.54 nm到1.48 nm范围内;随无机纳米组分增加,界面层厚度增加,有机相与无机相作用变强;无机纳米颗粒同时具有质量分形和表面分形特征,其分布、集结是一种非线性动力学过程;随组分增加,其质量分形维数降低 关键词： 小角X射线散射 纳米杂化 聚酰亚胺 界面     

Au纳米颗粒和CdTe量子点复合体系发光增强和猝灭效应

利用金属蒸发真空多弧离子源注入机, 将Au离子注入到高纯石英玻璃来制备镶嵌有Au 纳米颗粒的衬底材料, 随后将化学方法合成的CdTe量子点旋涂在玻璃衬底上制备了Au纳米颗粒和CdTe量子点复合体系. 通过对镶嵌有Au纳米颗粒的衬底进行热退火处理来控制Au纳米颗粒的生长和分布, 系统研究了Au纳米颗粒的局域表面等离子体共振对CdTe量子点光致发光性能的影响. 利用光学吸收谱、原子力显微镜、透射电子显微镜和光致发光谱对样品进行了表征和测试. 光致发光谱表明, Au纳米颗粒的局域表面等离子体对CdTe量子点的发光有增强效应也有猝灭效应. 深入分析了Au纳米颗粒和CdTe量子点之间的相互作用过程, 提出了关于Au-CdTe 纳米复合体系中CdTe 发光增强和猝灭的新机理. 该实验结果为利用金属纳米颗粒表面等离子体技术制备高发光性能的光电子器件提供了较好的参考.     

金属纳米颗粒的局域表面等离子体共振与面形状关系研究

采用三维时域有限差分法,数值研究了等高、等体积下不同形状金属纳米颗粒的局域表面等离子体的共振性质及其规律,得到了面形状因子对共振波长的影响关系。研究表明,沿偏振方向的形状变化对共振波长偏移有重要贡献,在空气中,确定金属纳米结构局域表面等离子体共振波长的形状参数L可采用偏振方向上的纵横比和面形状因子描述,L可以拟合为纵横比和面形状因子乘积的线性函数。得到了等高、等体积下不同形状金属纳米颗粒的局域表面等离子体共振的电场能量和共振波长的关系,面形状因子越小,形状越尖锐,电场能量越高,共振波长红移。研究结果为进一步了解金属纳米颗粒的局域表面等离子体共振性质提供有益的参考。     

Effect of silane/nano-silica on the mechanical properties of basalt fiber reinforced epoxy composites

The present study explains the role of surface modification of constituent materials on composite material performance. The influence of silane and nano-hybrid coatings on mechanical properties of basalt fibers and composite materials on their base was investigated. Infrared spectroscopy indicated that modification of basalt fiber surface and nano-SiO₂ was successfully applied. The surface modification leads to the significant increase in the tensile strength of basalt fibers compared to the non-coated fibers. The tensile strength of silane-treated fibers was established 23% higher than the non-coated fibers, indicating that silane plays a critical role in the strength retention of basalt fibers. Also it was pointed out that silane coupling agents can be used for the preparation of the nano-hybrid coating. Addition of SiO₂ nanoparticles into the fiber surface was incorporated to enhance the interfacial bonding of basalt fiber reinforced epoxy composite.     

Molecular dynamic simulation of core–shell structure: study of the interaction between modified surface of nano-SiO2 and PAMAA in vacuum and aqueous solution

The interaction between acrylamide acrylicacid copolymer (PAMAA) and the modified surface of nano-SiO₂ is investigated using the molecular dynamic (MD) simulation. The binding energies (E_binding) of interface, the concentration profiles of PAMAA and functional groups (carboxyl and acylamino) of corresponding model, the mean square displacements (MSD) and diffusion coefficients (D) of PAMAA in four systems with different modifiers are all calculated at 325 K in vacuum. Vinyl trimethoxy silane (VTEOS) shows best modification effect in the systems mentioned above. Furthermore, the effects of temperature on the interaction between VTEOS modified surface of nano-SiO₂ and PAMAA are studied at 300, 325, 350, 375 and 400 K in aqueous solution. Interesting results show that, water molecular layer reduces with the increase of temperature, and then improves the interaction between PAMAA and VTEOS modified surface of nano-SiO₂. The corresponding E_binding of interface, the radial distribution functions (RDF) of carbon atoms on the surface and oxygen atoms of water molecules, the concentration profiles of PAMAA on the surface of nano-SiO₂, the MSD and D of PAMAA are all studied seriously to find the reason of this counterintuitive phenomenon.     

Effects of the surface coating of BaMgAl10O17:Eu phosphor with SiO2 nano-particles

BaMgAl₁₀O₁₇:Eu²⁺(BAM) phosphors were coated with SiO₂ nano-particles by a modified sol-gel method. In order to elucidate the effects of SiO₂ coating onto BAM phosphor, the luminescent decay time is measured before and after SiO₂ coating. It was revealed that surface coating of BAM phosphors with SiO₂ leads to an increase in luminescent decay time and quantum efficiency, due to the suppression of nonradiative decay via surface defects. The experimental results suggest that the nonradiative decay via surface defects is an important relaxation process, related to the optical properties of display devices such as plasma display panels (PDP) and lamps.     

Influence of nano-SiO2 on dilational viscoelasticity of liquid/air interface of cetyltrimethyl ammonium bromide

An investigation was reported on the interfacial rheology of nano-SiO₂ dispersions in the presence of cetyltrimethyl ammonium bromide (CTAB). The interfacial dilational viscoelasticity had been measured as a function of the nano-particle concentration. The properties of the interface were affected by different processes such as the surfactants adsorption at the liquid or at the particle interfaces. It was found that the influence of nano-SiO₂ particles on the interfacial properties was evident and complex. The property of SiO₂ particles would change from hydrophilic to hydrophobic when CTAB molecules absorbed at their surface. The reorganization of surfactants and the participation of hydrophobic SiO₂ at the surface were offered to explain the process. In particular, the interaction between surfactants and particles, and the transfer of particles from bulk to the surface played an important role in changing the properties of the interface.     

Electrode reaction at platinum / ceria surface modified YSZ interface

The electrode reaction was examined on ceria coated YSZ by a platinum point electrode in H₂-H₂O atmosphere at 973 K- 1173 K. The thickness of the ceria coating layer was altered from 0 to 2.5 μm, fabricated by a laser ablation and by a vacuum vapor deposition method on YSZ single crystals. The electrode / electrolyte interface conductivity increased with 1/4 powers ofp(H₂) andp(H₂O) on both ceria coated and non-coated YSZ. The interface conductivity was significantly improved on a thicker ceria coating surface than 1 μm. The effective electrode reaction radius also increased in a thick ceria coating. The¹⁸O/¹⁶O exchange experiment at low oxygen partial pressure revealed that the oxygen surface exchange rate of ceria is not high compared with that of YSZ. It can be concluded that the bulk ionic conduction of ceria makes a more effective contribution to the electrode reaction than the surface catalytic activity in H₂-H₂O atmosphere. Paper presented at the 4th Euroconference on Solid State Ionics, Renvyle, Galway, Ireland, Sept. 13–19, 1997     

Synthesis and characterization of polyurethane/SiO2 nanocomposites

In order to achieve good dispersion of nano-SiO₂ and increase the interactions between nano-SiO₂ and PU matrix, nano-SiO₂ was firstly modified with poly(propylene glycol) phosphate ester (PPG-P) which was a new polymeric surfactant synthesized through the esterification of poly(propylene glycol) (PPG) and polyphosphoric acid (PPA). Then a series of polyurethane (PU)/SiO₂ nanocomposites were prepared via in situ polymerization. The surface modification of nano-SiO₂, the microstructure and the properties of nanocomposites were investigated by FTIR, SEM, XRD and TGA. It was found that good dispersion of nano-SiO₂ achieved in PU/SiO₂ nanocomposite after the modification with PPG-P. The segmented structures of PU were not interfered by the presence of nano-SiO₂ in these nanocomposites.     

Composite electroplating of Cu-SiO2 nano particles on carbon fiber reinforced epoxy composites

The main purpose of this work is to co-deposit nano-SiO₂ particles into the copper coatings on carbon fiber reinforced epoxy (C/EP) composite surface by electrodeposition method in order to improve the micro hardness of coatings. C/EP composites are copper plated with sulfuric acid based solution, and the effects of nano-SiO₂ and C₆H₁₂O₆ in the electrolyte contents on the copper coatings are investigated. It is found that crystalline grains of coatings are markedly refined by nano-SiO₂ in the acidic sulfate copper plating bath and the ceramic particles cause an increase in hardness of coatings though nano-SiO₂ results in a decline of deposition rate and a decrease in electrical conductivity of electroplating layers. Otherwise, C₆H₁₂O₆ in the plating bath is indispensable to the layer formation even though nano-SiO₂ added. These results demonstrate that the hardness of coatings will be increased with appropriate contents of co-deposited SiO₂ and C₆H₁₂O₆ in the plating bath.     

Preparation and Properties of Polylactide/Poly(ethylene-co-octene)/nano-SiO2 Ternary Composites

Polylactide (PLA)/poly(ethylene-co-octene)(POE) blends with various contents of nano-SiO₂ were prepared via melt mixing. The structure and properties of the PLA/POE/nano-SiO₂ ternary composites were studied by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), rheometry, and tensile testing. The particle size of the dispersed POE phase first decreased with increasing nano-SiO₂ content and then remained constant. Nano-SiO₂ played an important role in the heterogeneous nucleation of PLA, which resulted in an increase of the crystallinity of PLA. The synergistic effect of both POE and nano-SiO₂ can significantly improve the toughness, strength, and modulus of PLA. When the ratio of PLA/POE/nano-SiO₂ was 90/10/0.5, PLA/POE/nano-SiO₂ composite had the best comprehensive properties.     

Enhanced corrosion resistance and cellular behavior of ultrafine-grained biomedical NiTi alloy with a novel SrO-SiO2-TiO2 sol-gel coating

NiTi alloy has a unique combination of mechanical properties, shape memory effects and superelastic behavior that makes it attractive for several biomedical applications. In recent years, concerns about its biocompatibility have been aroused due to the toxic or side effect of released nickel ions, which restricts its application as an implant material. Bulk ultrafine-grained Ni50.8Ti49.2 alloy (UFG NiTi) was successfully fabricated by equal-channel angular pressing (ECAP) technique in the present study. A homogeneous and smooth SrO-SiO₂-TiO₂ sol-gel coating without cracks was fabricated on its surface by dip-coating method with the aim of increasing its corrosion resistance and cytocompatibility. Electrochemical tests in simulated body fluid (SBF) showed that the pitting corrosion potential of UFG NiTi was increased from 393 mV(SCE) to 1800 mV(SCE) after coated with SrO-SiO₂-TiO₂ film and the corrosion current density decreased from 3.41 μA/cm² to 0.629 μA/cm². Meanwhile, the sol-gel coating significantly decreased the release of nickel ions of UFG NiTi when soaked in SBF. UFG NiTi with SrO-SiO₂-TiO₂ sol-gel coating exhibited enhanced osteoblast-like cells attachment, spreading and proliferation compared with UFG NiTi without coating and CG NiTi.