Fabrication of Compound Lattice by Holographic Lithography

Some compound lattices in photonic crystals with large complete photonic band gaps, such as the diamond structure and the two-dimensional hexagonal compound structure, is desired for fabrication. A novel method for fabrication of compound lattices by holographic lithography is reported. The key point is phase modulation by photoelectrical control and multiple-exposure techniques. This technique introduces many advances: for instance,using the same coherent beams and without changing the position of the sample during multiple-exposure.     

张志三先生的生平

张志三,光谱学家。《光谱学与光谱分析》的副主编、顾问。早期致力于原子发射光谱应用的研究。建立较完善的分子光谱实验室,为我国光谱学的发展做出了贡献。热心进行激光光谱的应用研究,促进了我国激光物理,原子、分子物理的发展。张志三先生因病于2003年9月20日在北京逝世,享年83岁。张先生严以律己,宽厚待人,治学严谨的科学态度,深得科技界同行的爱戴和赞誉。得知张先生过世的消息,大家深为悲痛。张志三先生的生前好友于9月25日到医院向张先生作最后告别。     

Spectral property and its shape transition on ^72-84Kr isotopes in microscopic core plus two-quasiparticle approach

By using a microscopic sdIBM-2 2q.p, approach, the levels of the ground-band, 7-band and partial two-quasi-particle bands for ^72-84Kr isotopes are calculated. The data obtained are in good agreement with the recent experimental results, and successfully reproduce the nuclear shape phase transition of ^72-S4Kr isotopes at zero temperature.The ground-state band is described successfully up to J^π=18^ and Ex=10.0MeV. Based on this model, the aligned requisite minimum energy has been deduced. The theoretical calculations indicate that no distinct change of nuclear states is caused by the abruptly broken pair of a boson, and predict that the first backbending of Kr isotopes may be the result of aligning of two quasi-neutrons in orbit g9/2, which galus the new experimental support of the measurements of g factors in the ^78-86Kr isotopes.     

企业合作联盟成员位次竞争战略的Shapley值分析

针对Yanowitz和Bruckstein的二值字图像后处理算法存在的问题，提出了一种新的基于灰度期望值的后处理算法。实验结果表明，该算法能自动选取阈值、运算速度快、处理效果好，具有良好的噪声适应性。     

静摩擦力教学方法的探讨

当两个互相接触并处于相对静止的物体间存在相对运动趋势时,就有静摩擦力产生.静摩擦力的方向与相对运动趋势方向相反,与接触面相切.为了帮助学生正确处理有关静摩擦力的问题,现介绍以下两种方法.1 根据静摩擦力产生的条件分析     

CNx纳米管的制备、结构观察及低场致电子发射性能研究

采用高温热解法，以乙二胺为前驱液，在沉积有铁催化剂的p型硅（111）基底上制备出了定向生长的CNx纳米管.利用扫描电子显微镜、高分辨率透射电子显微镜和拉曼光谱对CNx纳米管进行了形貌观察和表征.CNx纳米管的高度在20?μm左右，直径在50—100nm之间，具有明显的“竹节状”结构，结晶有序度较差.对CNx纳米管薄膜进行低场致发射性能测试：外加电场为1.4V/μm，观察到20?μA /cm2发射电流，外电场升至2.54V/μm时发射电流达到1.280mA/cm2，在较高外电场下，没有发现电流“饱和”.这比 关键词： CNx纳米管 高温热解 “竹节状”结构 场致发射     

TATB钝感炸药的小角X射线散射实验

在北京同步辐射装置上应用同步辐射X射线小角散射技术研究TATB样品微孔状况，分析了微孔结构参数的变化。采用不同制备工艺(机械研磨、化学合成、气流细化、全结晶、粉碎)和不同存放时间的TATB粉末样品共计7份。     

一般组合弹性结构的数学模型

研究由任意多个体、板、梁构成的一般组合弹性结构静态问题. 通过最小势能原理和虚功原理建立问题在向量表示下的数学模型. 在获得了一般组合弹性结构上的广义Korn不等式后, 利用Lax-Milgram引理证明了模型的唯一可解性. 在对解做合理的正则性假设的条件下, 由相应变分形式导出向量表示下的所有平衡方程, 并得到了一个对该问题进行有限元分析时有重要作用的恒等式.     

广义C-R组的性质及两个边值问题

本文考虑广义C-R组^[1](H)的解f=u iv jw∈C^2的一些性质，提出与之相关的两个边值问题，用积分方程方法和调和函数性质证明了边值问题解的存在唯一性，并写出解的积分表达式．     

Temperature-Dependent Dynamic Properties of LixMn2O4 in Monte Carlo Simulations

Monte Carlo (MC) simulations are used to simulate the voltage profile and the ionic conductivity s of Li ions in LixMn2O4 and its dependence on the lithium concentration x. The open circuit potential shows clearly the two plateaus in the charge/discharge curve, which agrees well with the experimental results. The two plateaus become more and more steep when the temperature is increased. The simulated ionic conductivity shows an M-shaped curve in the plot of ionic conductivity cr versus x when the simulation temperature is low. Interestingly,the minimum valley, which lies at the middle single-phase area near x=0.5, disappears gradually when the temperature increases to 453K.