Magnetic graphene oxide modified with choline chloride-based deep eutectic solvent for the solid-phase extraction of protein

Four kinds of green deep eutectic solvents (DESs) based on choline chloride (ChCl) have been synthesized and coated on the surface of magnetic graphene oxide (Fe₃O₄@GO) to form Fe₃O₄@GO-DES for the magnetic solid-phase extraction of protein. X-ray diffraction (XRD), vibrating sample magnetometer (VSM), Fourier transform infrared spectrometry (FTIR), field emission scanning electron microscopy (FESEM) and thermal gravimetric analysis (TGA) were employed to characterize Fe₃O₄@GO-DES, and the results indicated the successful preparation of Fe₃O₄@GO-DES. The UV–vis spectrophotometer was used to measure the concentration of protein after extraction. Single factor experiments proved that the extraction amount was influenced by the types of DESs, solution temperature, solution ionic strength, extraction time, protein concentration and the amount of Fe₃O₄@GO-DES. Comparison of Fe₃O₄@GO and Fe₃O₄@GO-DES was carried out by extracting bovine serum albumin, ovalbumin, bovine hemoglobin and lysozyme. The experimental results showed that the proposed Fe₃O₄@GO-DES performs better than Fe₃O₄@GO in the extraction of acidic protein. Desorption of protein was carried out by eluting the solid extractant with 0.005 mol L⁻¹ Na₂HPO₄ contained 1 mol L⁻¹ NaCl. The obtained elution efficiency was about 90.9%. Attributed to the convenient magnetic separation, the solid extractant could be easily recycled.     

Preparation of a new Cu(II)-imprinted polymer and its application for the determination of trace copper in water samples by flame atomic absorption spectrometry

A new Cu(II)-imprinted polymer has been prepared for selective solid-phase extraction of Cu(II) prior to its determination by flame atomic absorption spectrometry. Two functional monomers, 4-(methacryloylamino)benzamide and 4-vinylpyridine, formed a complex with Cu(II) ion through coordination interactions. The self-assembled Cu(II)-monomer complex was copolymerised via bulk polymerisation method in the presence of ethyleneglycoldimethacrylate cross-linker. In order to remove Cu(II) ions, the resulting polymer was washed with 1.0 M HNO₃ and then with water until obtaining a neutral pH. The ion imprinted polymer was characterised by Fourier transform infrared. The experimental conditions were optimised for solid-phase extraction of Cu(II) using a column of ion-imprinted polymer (IIP). Quantitative retention was achieved between pH 5.0 and 7.0, whereas the maximum recovery for the non-imprinted polymer (NIP) was about 74% at pH 7.0. The IIP showed higher selectivity to Cu(II) in comparison to the NIP. The IIP also exhibited excellent selectivity for Cu(II) in the presence of other metal ions. The relative standard deviation and limit of detection (3s) of the method were 1.6% and 1.8 µg L^?1, respectively. The method was verified by analysis of two certified reference materials (CWW-TM-D and SRM 3280) and then applied to the determination of Cu(II) in seawater and lake water samples and haemodialysis concentrates.     

Solid-phase extraction of Pb2+ ion from environmental samples onto L-AC-Ag-NP by flame atomic absorption spectrometry (FAAS)

The development of a solid-phase extraction (SPE) procedure for the pre-concentration of trace amounts of Pb²⁺ ion on 2-furan-2-yl-1-furan-2-ylmethyl-1H-benzoimidazole loaded on activated carbon modified with silver nanoparticles (L-AC-Ag-NP) was presented. The metal ion retained on the sorbent was quantitatively determined via complexation with the ligand. The complexed metal ion was efficiently eluted using 10 mL of 4 mol L^?1 sulphuric acid in 10 w/v% acetone. The influences of the analytical parameters, including pH, amounts of the ligand and the solid phase, eluent conditions and sample volume, on the recoveries of the metal ion were optimised. Using the optimised parameters, the linear response of the SPE method for Pb²⁺ ion were in the ranges of 0.2–160 µg L^?1, and the detection limit for Pb²⁺ ion was 0.034 µg L^?1. The proposed method exhibits a pre-concentration factor (PF) of 80 and an enhancement factor of 30 for Pb²⁺ ion. The presented results demonstrate the successful application of the proposed method for the determination of Pb²⁺ ion in some real samples with high recoveries (>93%) and reasonable relative standard deviation (RSD < 2%).     

Trace analysis of Pt (IV) metal ions in roadside soil and water samples by Fe3O4/graphene/polypyrrole nanocomposite as a solid-phase extraction sorbent followed by atomic absorption spectrometry

A novel Fe₃O₄/graphene/polypyrrole nanocomposite has been successfully synthesised via a simple chemical method and applied as a new magnetic solid-phase extraction (MSPE) sorbent for the separation and pre-concentration of trace amounts of Pt (IV) in environmental samples followed by flame atomic absorption spectrometric (FAAS) detection. The nanocomposite has been characterised by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy. Seven important parameters, affecting the extraction efficiency of Pt (IV), including pH, adsorption time, desorption solvent type and concentration, desorption time, elution volume and sample volume, were investigated. Under the optimised conditions, the calibration graph was linear in the range of 50–1500 μg L^?1 (R = 0.993). The detection limit and pre-concentration factor (PF) for Pt (IV) were found to be 16 μg L^?1 and 112.5, respectively. Under the optimised solid-phase extraction (SPE) conditions, the adsorption isotherm and the adsorption capacity of the nanocomposite for Pt (IV) were studied. Pt (IV) adsorption equilibrium data were fitted well to the Langmuir isotherm and the maximum adsorption capacity of the magnetic sorbent was calculated from the Langmuir isotherm model as 416.7 mg g^?1. The precision of the method was studied as intraday and interday variations. A relative standard deviation percentage (RSD%) value less than 3.0 indicates that the method is precise. Also, the accuracy of the method was tested by the analysis of the standard reference material (NIST SRM 2556) and by recovery measurements on spiked real samples. It was also shown that the optimised method was suitable for the analysis of trace amounts of Pt (IV) in roadside soil, tap water and wastewater samples.     

固相微萃取结合气-质联用分析麻椒挥发性成分

以四川广元产的麻椒为原料,利用固相微萃取技术对麻椒中的挥发性成分进行提取,分别用装有HP-5ms和HP-INNOWAXms两种色谱柱的GC-MS进行分离与鉴定;采用质谱与保留指数进行定性,共鉴定出99种成分,其中烯烃类58种、醛类15种、醇类9种、酯类7种、酮类3种、其他烃类4种、其他化合物3种。采用面积归一化法确定了它们相对含量,含量较高的有芳樟醇、D-柠檬烯、β-崖柏烯、β-水芹烯、β-月桂烯、β-蒎烯、(-)-右旋吉玛烯、石竹烯、γ-萜品烯、3-崖柏烯、(Z)-β-罗勒烯、(1R)-(+)-α-蒎烯、(+)-3-蒈烯、(Z,Z,Z)-1,5,9,9四甲基-1,4,7环-十一碳三烯、萜品油烯。从鉴定出的挥发性成分的香气特征可知,烯烃类、醇类和醛类对麻椒的香气贡献较大。     

石墨烯/聚二甲基硅氧烷涂层顶空固相微萃取与气相色谱联用测定环境水和果汁中菊酯农药残留

建立了石墨烯/聚二甲基硅氧烷涂层顶空固相微萃取与气相色谱在线联用测定环境水和果汁样品中6种菊酯类农药的检测方法。该涂层的萃取性能优于商用聚二甲基硅氧烷(PDMS,Polydimethylsilane)及聚丙烯(PA,Polypropylene)涂层。对影响萃取性能的因素(如萃取温度、离子强度、萃取时间及解吸时间)依次进行了优化。在最优条件下,丙烯菊酯与联苯菊酯的线性范围为0.02~5μg/L,甲氰菊酯、氯氰菊酯、氰戊菊酯的线性范围为0.1~20μg/L,溴氰菊酯的线性范围为0.2~20μg/L,其相关系数均高于0.99,检出限为6.8~58.2 ng/L,定量下限为18.2~154.9 ng/L。同一涂层的相对标准偏差(RSD,n=5)不高于9.2%,3根涂层之间的RSD为6.7%~10.8%。将该方法用于河水、鱼塘水、苹果汁和橙汁中6种菊酯残留的分析,加标回收率分别为81.6%~92.9%,82.3%~96.1%,78.2%~92.8%和79.9%~91.7%。方法简便、灵敏,能够满足环境水样及浓缩果汁样品中痕量农药残留的分析要求。     

液相色谱-串联质谱同时测定禽肉组织中盐酸金刚烷胺、盐酸金刚乙胺、地塞米松、替米考星及喹乙醇代谢物的残留量

建立了同时测定禽肉组织中盐酸金刚烷胺、盐酸金刚乙胺、地塞米松、替米考星及喹乙醇代谢物残留量的液相色谱-串联质谱分析方法。样品用2 mol/L氢氧化钠溶液水解,盐酸调节p H值后,以乙腈作为提取溶剂,经C18固相萃取柱净化。各待测物分别经0.1%甲酸甲醇溶液和氨化甲醇(0.1%氨水)洗脱,Phenomenex Kinetex C18(100 mm×4.6 mm,2.6μm)色谱柱进行分离,采用0.1%甲酸(含5 mmol/L乙酸铵)-甲醇作流动相,梯度洗脱,串联质谱法对5种药物含量进行测定。结果表明,5种药物在2~100μg/L范围内线性关系良好,相关系数为0.996 2~0.999 8。在加标浓度为5~50μg/kg的禽肉组织中,这5种药物的加标回收率为73.7%~92.3%,相对标准偏差(n=5)为3.9%~16.6%,检出限为0.2~3.0μg/kg,定量下限为0.7~10μg/kg。方法快速、简便、经济实用,符合法规要求,可满足日常检测的需要。     

龙井茶特征香气成分分析及种类判别

采用顶空固相微萃取(HS-SPME)和气相色谱-质谱(GC-MS)联用技术分析了39份龙井茶叶中的挥发性成分,结合质谱数据库与保留指数,从24份西湖核心区龙井茶中获得了200余种挥发性化合物,这些挥发性成分中主要含有醇类、酯类、酮类、杂环类等化合物,经筛选得到26种共有组分.并采用主成分分析法(PCA)对24份西湖核心区龙井茶和15份疑似龙井茶进行了有效区分.该方法适用于茶叶的品质鉴定、真假识别、产地溯源等方面的研究,也为其他产品的挥发性成分分析提供参考.     

超高效液相色谱-大气压化学电离-三重四极杆质谱联用法快速测定食品中苯并[a]芘

建立了快速检测食品中苯并[a]芘的超高效液相色谱-三重四极杆质谱联用(UPLC-MS/MS)分析方法。样品用正己烷提取后,经分子印迹固相萃取柱净化,以甲醇和水作为流动相进行梯度洗脱,在XBridge BEH C18柱上实现分离,大气压化学电离(APCI)-三重四极杆质谱正离子MRM方式检测,以苯并[a]芘-d12作为内标的稳定同位素稀释法定量。方法的线性范围为0.07~50μg/kg,定量限为0.07μg/kg。平均加标回收率为86%~104%,相对标准偏差为2.3%~14%。该方法灵敏、准确,适用于食品中苯并[a]芘的测定,已应用于实际样品的检查。     

固相萃取-高效液相色谱法同时测定牛组织中三氮脒和氯化氮氨菲啶残留

建立了固相萃取-高效液相色谱同时检测牛组织中三氮脒(DIM)和氯化氮氨菲啶(ISM)残留的分析方法。针对不同的组织样品采用不同比例的水-乙腈溶液提取药物,结合Oasis WCX固相萃取小柱净化富集。采用Spherisorb CN柱(250 mm×4.6 mm,5μm)对药物进行分离,以乙腈和0.05 mol/L甲酸铵溶液(pH 2.4)为流动相,梯度洗脱,紫外检测波长为380 nm。牛组织中DIM和ISM的检出限(S/N≥3)为0.01 mg/kg,定量限(S/N≥10)为0.025 mg/kg。牛组织中DIM和ISM在各自的线性范围内线性关系良好(r≥0.999 3)。DIM和ISM在低、中、高添加水平下的回收率为82.2%~97.6%,日内精密度和日间精密度分别为0.3%~5.2%(n=5)和1.3%~5.2%(n=15)。结果表明,建立的方法重复性好,灵敏度高,操作简便,适用于牛组织中DIM和ISM的残留检测。