二价金属离子萃取速率常数与软硬酸碱规则

用上升液滴法测定了２－乙基己基膦酸单（２－乙基己基）酯－正辛烷从硝酸介质中萃取镁、钙、锌、镍、铜和铅等二价金属离子的正向初始速率，建立了速率方程，计算出正向萃取反应的速率常数、活化能及活化熵，首次将软硬酸碱规则与金属溶萃取速率常数关联。结果表明，在萃取机理相同时，萃取速率常数的大小与金属离子的软硬酸碱标度一致，即萃取过程中，作为酸的被萃取金属离子，其硬度越大，萃取速率常数亦越大，萃取反应的活化能…     

从电子工业“脊梁”到全面开花的镓元素

镓是第一个根据化学元素周期律预言并在自然界中证实的元素，是室温下电导率和热导率均为最大的液态物质，镓在电子工业中得到了广泛应用，被誉为电子工业“脊梁”。近十几年来，镓的更多应用潜力被发掘出来，在电子工业、散热、增材制造、柔性机器、生物医学等领域均有重要的应用前景。     

基于改进模拟退火算法的推动式生产-配送协调优化

为减小物资生产与配送不协调造成的成本及生产资源浪费,建立了考虑推动式生产调度的物资配送优化模型,并针对标准模拟退火算法受随机因素影响易陷入局部最优的缺点,设计带有回火与缓冷操作的改进模拟退火算法对模型求解,确定了优化的车辆配送路线以及物资生产计划。对比实验结果表明:相对于单纯的物资配送优化模型,考虑推动式生产调度的配送优化模型,能够有效减小物资滞留时间以及配送延误成本;相较于标准模拟退火算法,改进算法搜索到了更优解,且计算结果的标准差减小了93.42%,稳定性更好;同时,改进模拟退火算法具有较低的偏差率,在中小规模算例中求解质量较高,平均偏差率在0.5%以内。     

Validation of a screening method for the simultaneous identification of fat-soluble and water-soluble vitamins (A,E, B<Subscript>1</Subscript>, B<Subscript>2</Subscript> and B<Subscript>6</Subscript>) in an aqueous micellar medium of hexadecyltrimethylammonium chloride

Simultaneous determination of the fat-soluble vitamins A and E and the water-soluble vitamins B₁, B₂ and B₆ has been carried using a screening method from fluorescence contour graphs. These graphs show different colour zones in relation to the fluorescence intensity measured for the pair of excitation/emission wavelengths. The identification of the corresponding excitation/emission wavelength zones allows the detection of different vitamins in an aqueous medium regardless of the fat or water solubility of each vitamin, owing to the presence of a surfactant which forms micelles in water at the used concentration (over the critical micelle concentration). The micelles dissolve very water insoluble compounds, such as fat-soluble vitamins, inside the aggregates. This approach avoids the use of organic solvents in determining these vitamins and offers the possibility of analysing fat- and water-soluble vitamins simultaneously. The method has been validated in terms of detection limit, cut-off limit, sensitivity, number of false positives, number of false negatives and uncertainty range. The detection limit is about g L^–1. The screening method was applied to different samples such as pharmaceuticals, juices and isotonic drinks.     

食品中化学性有害物的质谱软电离裂解规律及筛查技术研究进展

食品中化学性有害物是导致食品安全问题的重要原因，质谱是对食品中化学性有害物进行定性定量分析的有效方法。该文按照化合物结构类别，综述了食品中重要化学性有害物的质谱软电离裂解机理，包括农药、兽药、真菌毒素，以及其他化学污染物。对于每类化合物，重点综述化合物质谱裂解产生的特征碎片、中性丢失等，以及这些质谱软电离裂解机理在食品中化学性有害物筛查及发现中的应用。研究化合物的质谱裂解机理可以帮助研究者对化合物进行结构解析和结构确证，为食品中同类结构新型化学性有害物的发掘提供理论依据。     

Use of blowing catalysts for integral skin polyurethane applications in a controlled molecular architectural environment: Synthesis and impact on ultimate physical properties

Polyurethane elastomers of a controlled molecular architecture were synthesized using a two‐step polymerization technique. The building blocks of the elastomeric materials included urea–urethane prepolymers end‐capped with diisocyanate groups and had an exact number of urea groups at both ends. Two‐dimensional bifurcated hydrogen‐bonding networks incorporating the urea groups were, with differential scanning calorimetric and dynamic mechanical thermal analyzer techniques, responsible for the increase in the glass‐transition temperature (T_g) of the hard block and sharp interface morphology between the pure “hard” domains and pure “soft” domains. The higher extent of the phase separation between the two phases contributed to higher elastic moduli for the hard blocks and higher tensile strength for the elastomeric samples. Higher elongation values were attributed to the liberation of the elastomeric chain ends that otherwise would have been constrained in the interface region. The higher T_g values of the hard blocks corresponded to an increase in the hardness values and a decrease in the tear‐strength values. The increase in the amount of urea groups within the hard segments, as a result of the increased amount of water and blowing catalyst, resulted in elastomeric foams with higher open‐cell content. This resulted in lower resilience values as measured using the pendulum rebound test and was attributed to the ability of the open cells to absorb and dissipate energy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2526–2536, 2002     

Low-molecular-weight photoresponsive supramulecular hydrogel based on a dicationic azobenzene-bridged pyridinium hydrogelator

Photoresponsive supramolecular hydrogel was fabricated from a small azobenzene-bridged dicationic pyridinium salt in the aqueous solution. The UV-vis light triggered reversible gel-sol transformation of such low-molecular-weight supramolecular hydrogel was systematically investigated through various analytical techniques.     

增强实验室X激光的亮度

实验室X激光已经取得重大进展,但均属自发辐射放大,缺乏模式限制的措施,故激光功率分散在多横模中,提高激光亮度的措施之一是模式限制.由于X光多层膜一般为高吸收膜,用以形成谐振腔作模式限制看来是困难的.本文建议采用相距足够远的二段激光等离子体作同步延迟行波放大来进行横模限制.分析表明,达到衍射极限的单横模X激光是可能的,这对X光全息术以及高亮度X激光的实现是十分重要的.本文还建议改变一般采用的产生线状等离子体的光学系统设计,使激光功率密度在长线上达到均匀;认为过去的光学系统不良是长焦线时,X激光增益-长度乘积低的一个可能原因.     

ORGANIC GEOCHEMISTRY OF ARTIFICIALLY HEATED SPHAGNUM COAL CONSIDERED AS POSSIBLE SOURCE ROCK FOR OIL AND GAS

A preliminary study of simulated thermal maturity has been conducted to evaluate the oil, gas and hydrocarbon generation potential of sphagnum coal in the Jinsuo brown coal basin, Yunnan Province and to understand the characteristics of the element composition and biomarkers in the course of thermal alteration. The experimental result was compared with that of xylitic coal, a kind of lithotype of soft brown coal. It is considered that sphagnum coal possesses the potential of forming economic accumulation of oil and gas. Its highest proportion of oil and hydrocarbon generation is 510 mg/g Corg. and 232.1 mg/g Corg. respectively. At an R_(ran)~° value of 2.51%, the ratio of gas generation from sphagnum coal attains to 620.5 ml/g Corg. In view of sphagnum coal being different from the conventional soft brown coal in various respects such as coal forming raw materials and enviroments as well as physico-chemical properties, it is Suggested as a special kind of source rock for coal-generated oil and gas.