泛连通图定理和Ore2条件

记Ore2=min{d(y) d(x)|x,y∈V(G),d(x,y)=2}，本得到：若n阶图G的Ore2≥n 1，则G是[5;n]泛连通图。此是比Faudree等人的定理进一步的结果。     

石墨炉原子吸收光谱法测定磷矿石中微量铅

研究了石墨炉原子吸收光谱法测定磷矿石中微量铅，探讨了熔样过程，基体效应，共存元素及载气流速等干扰，并进行了干扰抑制试验，提出了最优方式对磷矿石中微量铅进行测定，回收率为90．5％～107．0％。     

火焰原子吸收法测定铅锌矿中微量镓

将样品中的硫化物用HNO3氧化为硫酸盐后，再用HNO3、HF、H2SO4进一步溶解，在6mol/LHCl介质中用乙酸丁酯萃取镓，水反萃取后，用火焰析子吸收法测定Ga，该法检出限为0．80μg/mL，相对标准偏差为2．1％，用该法测得国家一级标准品的结果均与推荐值相符。     

分光光度计测铁矿石中钛的测量不确定度评定

紫外-可见分光光度计在化学分析中应用较为广泛。对于借助其进行化学分析测量不确定度的评定，目前较多见于溶液测定。实际应用中，测试样品多为固体，涉及到称样、溶解、稀释、定容等步骤。此文试从随机效应和系统效应的角度考虑，对紫外-可见分光光度计应用ISO4691：1985铁矿石中钛含量的测定——二安替比林甲烷分光光度法对铁矿石中钛的测量过程中的不确定度来源进行了较为全面的分析，并最终给出评定结果。     

Determination of Trace Elements in Tea and Coffee by Neutron Activation Analysis

Thermal neutron activation analysis, a high-resolution Ge(Li) gamma-ray spectrometer, and an IBM 360/67 digital computer were used to determine the concentration of Na, K, Sc, Cr, Mn, Fe, Co, Cu, Zn, Se, Br, Rb, Sb, Cs, and Hg in ground coffee and tea. This nondestructive multielement technique requires neither pre- nor postirradiation chemistry and eliminates problems of reagent contamination. The method is simple, precise and sensitive to 15 elements. Interferences from fast neutron (n, p) and (n, α) reactions are small and, if necessary, corrections may be applied easily. This technique can be applied to percolated tea and coffee.     

Determination of lead (II) ion by highly selective and sensitive lead (II) membrane electrode based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl) methyliden)hydrazono)metyl)phenol

A PVC (poly vinyl chloride) membrane electrode for lead ion based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl)methyliden)hydrazono)metyl)phenol (HMHMP) as a membrane carrier was prepared. This electrode exhibited linear response with Nernstian slope of 29.2?±?0.2?mV per decade within the concentration range of 2.0?×?10^?7–1.0?×?10^?1?M lead ion. The limit of detection, as determined from the intersection of the extrapolated linear segments of the calibration plot, was 8.0?×?10^?8 M. The electrode exhibited high selectivity for Pb (II). The response time of the electrode was about 5–10?s for different concentrations. The electrode is suitable for use in aqueous solutions in a pH range of 5.0–7.5. It was used as an indicator electrode in a titration of Pb (II) with chromate at constant pH. This electrode was used for the determination of lead in ore samples, and the results were in agreement with those obtained with an atomic absorption spectroscopy (AAS) method. Also lead selective electrode was used for monitoring of lead in spiked samples of the Zayanderud River and waste water by the potentiometry technique.     

The “Click” Reaction Involving Metal Azides,Metal Alkynes,or Both: An Exploration into Multimetal Structures

Cu^I‐catalyzed 1,3‐cycloaddition of azides and alkynes (CuAAC) is one of the most powerful synthetic methodologies known. However, its use to prepare well‐defined multimetallic structures is underdeveloped. Apart from the applications of this reaction to anchor different organometallic reagents to surfaces, polymers, and dendrimers, only isolated examples of CuAAC with metal–η¹‐alkyne and metal–azide complexes to prepare multimetal entities have been reported. This concept sketches the potential of these reactions not only to prepare “a la carte” multimetal 1,2,3‐triazole derivatives, but also to discover new and unprecedented reactions.     

The Enrichment of Stale Tailings of Bom-gorhon Tungsten Ore Deposits

The results of mineralogical studies of technogenic tungsten raw material (stale tailings of Bom-Gorhon deposit) are represented. Its particle size distribution as well as tungsten and accompanying element distribution among the fractions were determined. The necessity of grinding the heaps down to 0.2-0.25 mm in size was established. It allows increasing the recovery rate of two or more times in comparison with the traditional pattern of tailing processing.     

全自动红外吸收光谱法测定硫化矿矿石中全硫量

近年来,随着全自动红外测硫仪的快速发展,仪器性能的升级优化,加之对固体矿物质种类和高硫含量检测技术有了新的技术突破。因此将全自动红外测硫仪应用于硫化矿矿石中全硫量的测定,采用国家硫矿石标准样品中不同段的硫含量(标准值),建立标准工作曲线,再结合实际样品校正该曲线,建立了一种用全自动红外吸收光谱法测定硫化矿矿石中全硫量的检测方法。方法的主要特点是包括样品称量在内的整个测试过程由计算机控制自动完成,自动化程度极高,分析时间短,结果准确、可靠。选取当地不同矿物特性的8个样品,测定的相对标准偏差RSD(n=11)均小于2.5%,样品加标回收率为86.2%~117%,与化学法(空气或氧气燃烧-碘量法)测定结果对照,测定结果都在允许误差范围内,完全能够满足日常硫化矿矿石中全硫含量的检测要求。