Thermal and biological studies of Schiff bases of chitosan derived from heteroaryl aldehydes

Journal of Thermal Analysis and Calorimetry - The synthesis of Schiff bases of chitosan is performed by the reaction of chitosan with different heteroaryl aldehydes, i.e., furfuraldehyde,...     

Formation of PdNiZn thin film at oil‐water interface: XPS study and application as Suzuki‐Miyaura catalyst

Nanosheet of PdNiZn and nanosphere of PdNiZn/reduced‐graphene oxide (RGO) with sub‐3 nm spheres have been successfully synthesized through a facile oil‐water interfacial strategy. The morphology and composition of the films were determined by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive analysis of X‐ray (EDAX) and elemental mapping. In the present study, we have developed a method to minimize the usage of precious Pd element. Due to the special structure and intermetallic synergies, the PdNiZn and PdNiZn/RGO nanoalloys exhibited enhanced catalytic activity and durability relative to Pd nanoparticles in Suzuki‐Miyaura C‐C cross‐coupling reaction. Compared to classical cross‐coupling reactions, this method has the advantages of a green solvent, short reaction times, low catalyst loading, high yields and reusability of the catalysts.     

Investigation of the Electroreduction Behavior,Electroreduction Mechanism and Voltammetric Determination of Medetomidine on the Graphene Paste Electrode

This paper presents a method for the construction of a graphene paste electrode (GPE) from reduced graphene oxide (RGO). The GPE was successfully used for the determination of medetomidine. The influence of some experimental variables such as pH, supporting electrolyte, scan rate, and possible interferences were studied. Differential pulse voltammetric (DPV) peak currents of medetomidine increased linearly with its concentration in the range from 0.009 to 2.5 µM. The limit of detection (LOD) and limit of quantitation (LOQ) values for the determination of medetomidine were 2.8 and 9.2 nM, respectively. Also, for the first time, the electroreduction behavior of medetomidine was investigated.     

A Simple and Convenient One-Pot Synthesis of Benzimidazole Derivatives Using Cobalt(II) Chloride Hexahydrate as Catalyst

A simple and efficient method for the convenient synthesis of 2-arylbenzimidazole has been described on reaction with o-phenylenediamine and various aromatic aldehydes using cobalt(II) chloride hexahydrate as a catalyst. The method is cost-effective, high-yielding, clean, and selective.     

Determination of lead (II) ion by highly selective and sensitive lead (II) membrane electrode based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl) methyliden)hydrazono)metyl)phenol

A PVC (poly vinyl chloride) membrane electrode for lead ion based on 2-(((E)-2-((E)-1-(2-hydroxyphenyl)methyliden)hydrazono)metyl)phenol (HMHMP) as a membrane carrier was prepared. This electrode exhibited linear response with Nernstian slope of 29.2?±?0.2?mV per decade within the concentration range of 2.0?×?10^?7–1.0?×?10^?1?M lead ion. The limit of detection, as determined from the intersection of the extrapolated linear segments of the calibration plot, was 8.0?×?10^?8 M. The electrode exhibited high selectivity for Pb (II). The response time of the electrode was about 5–10?s for different concentrations. The electrode is suitable for use in aqueous solutions in a pH range of 5.0–7.5. It was used as an indicator electrode in a titration of Pb (II) with chromate at constant pH. This electrode was used for the determination of lead in ore samples, and the results were in agreement with those obtained with an atomic absorption spectroscopy (AAS) method. Also lead selective electrode was used for monitoring of lead in spiked samples of the Zayanderud River and waste water by the potentiometry technique.     

Comprehensive and High-throughput Electrolysis of Water and Urea by 3–5 nm Nickel and Copper Coordination Polymers

Metal-organic coordination polymers (CP) have attracted the scientific attention for electrochemical water oxidation as it has the similar coordination structure like natural photosynthetic coordinated complex. However, the harsh synthesis conditions and bulky nature pose a major challenge in the field of catalysis. Herein, 3–5 nm CP particles synthesized at room temperature using aqueous solutions of Ni²⁺/Cu²⁺ and 2,5-dihydroxyterepthalic acid as precursor were applied for alkaline water and urea electrolysis. The overpotential required is only 300 mV at 10 mA cm⁻² by Nano-Ni CP for water oxidation, with turnover frequency (TOF) of 21.4 s⁻¹ which is around 8 times higher than its bulk-counterpart. Overall water and urea splitting were achieved with Nano-Cu (−) ∥ Nano-Ni (+) couple on Ni foam at 1.69 and 1.52 V to achieve 10 mA cm⁻², respectively. High electrochemical surface area (ECSA), high TOF, and enhanced mass diffusion are found to be the key parameters responsible for the state-of-the-art water and urea splitting performances of nano-CPs as compared to their bulk counterparts.     

Effect of substituents and encapsulation on the catalytic activity of copper(II) complexes of two tridentate Schiff base ligands based on thiophene: benzyl alcohol and phenol oxidation reactions

Encapsulation of Cu(II) complexes of methyl-2-(2-hydroxybenzylideneamino)-4,5,6,7-tetrahydrobenzo[b]-thiophene-3-carboxylate (HL¹) and 2-ethyl-4-methyl 5-(2-hydroxybenzylideneamino)-3-methylthiophene-2,4-dicarboxylate (HL²) in the supercages of zeolite NaY was performed by the flexible ligand method. The neat and encapsulated complexes were characterized by physicochemical and spectroscopic methods and employed as catalysts for oxidation of benzyl alcohol and phenol. The encapsulated complexes were both more reactive and stable as catalysts than the corresponding free complexes. The encapsulated complexes could be reused several times. Complexes of HL² were more reactive than those of HL¹, probably due to the electron-withdrawing effect of the CO₂Et group.     

One-Pot Multicomponent Reactions for the Efficient Synthesis of Highly Functionalized Dihydropyridines

Abstract

An efficient, atom-economic, one-pot protocol has been developed for the synthesis of highly functionalized dihydropyridines via four-component reactions of aromatic aldehydes, arylamines, malononitrile, and dimethylacetylenedicarboxylate in the presence of sodium hydroxide in ethanol. This domino reaction proceeded smoothly in good to excellent yields and offered several advantages, including short reaction time, simple experimental procedure, and applicability to a broad range of substrates.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

An efficient synthesis of pyrazole chalcones under solvent free conditions at room temperature

An easy,safe,solvent free and effective method for the synthesis of pyrazole-substituted chalcones has been achieved by grinding pyrazole aldehydes and acetophenones in the presence of activated barium hydroxide(C-200) in high yield within short span of time.All reactions were carried out just by grinding the two reactants in the presence of activated barium hydroxide(C-200). Results are also compared with sodium hydroxide and potassium hydroxide.