Structure of the 18-Crown-6 Complex with Ammonium Hexafluorosilicate and Water

The crystalline host–guest type complex [(18-crown-6NH₄)₂][SiF₆]4H₂Ohas been obtained as the result of the interaction of SiF₄2NH₃ with 18-crown-6 (18C6) in an aqueous medium. Crystal data: monoclinic, space groupC 2 c, a=26.541(2), b=8.363(2), c=20.469(2) Å, = 122.43(1)°and Z=4. The final R-value is 0.070 for 3253 reflections with I 2(I).The crystals consist of the complex [NH₄18C6]⁺ cations, [SiF₆]^2-anions and water molecules. The ammonium cation is hydrogen bonded by three of its H-atoms to the crown ether oxygen atoms with N(1) O separations2.923(5)–2.940(5) Å and by the fourth H-atom to the fluorine atom of thehexafluorosilicate anion, the N(1)F(4) distance being 2.797(6) Å.The conformation of the macrocycle and the hydrogen-bond geometry in thecomplex cation closely resemble those in related adducts between 18-crown-6and ammonium salts. All crystal components are connected via a system of hydrogen bonds into a ribbon along the b axis in the unit cell.     

弱碱性阴离子交换树脂分离1,6—二磷酸果糖的研究

采用弱碱性阴离子交换树脂HJ-30对发酵液中1，6-二磷酸果糖的分离进行了研究。详细地研究了树脂的吸附和脱附性能。实验结果表明，HJ-30树脂对FDP的吸附量达0．28gFDP／g湿树脂，以0．05mol／LNaCl洗脱光机磷和1mol／LNaCl洗脱1，6-二磷酸果糖，产品的收率和纯度分别为92％和99．4％。     

光敏型季铵盐类阳离子表面活性剂的合成及表面活性和泡沫性质

本文报道了一种光敏型的阳离子表面活性剂（AZO），其分子结构中含有偶氮苯基团，并研究了光照对表面活性和泡沫性能的影响。经紫外光照射后，表面活性剂的饱和吸附量（Г_max）减小，临界胶束浓度（cmc）、最低表面张力（γ_cmc）和分子极限占有面积（A_min）增大；气泡数目增多，直径变小，发泡能力和泡沫稳定性降低。实验结果证实，该表面活性剂的表面活性和泡沫稳定性可以用光照进行调控。     

Mixed micelles of cetyltrimethylammonium bromide and poly(ethylene glycol)-600 monolaurate as catalysts of polyethylenimine phosphorylation in chloroform

Micelle formation in a cetyltrimethylammonium bromide-poly(ethylene glycol)-600 monolaurate-chloroform system in the absence and presence of hydroxybenzylated polyethylenimines (PEI) was studied by dielcometric titration, NMR self-diffusion, light scattering, and kinetic methods. A catalytic effect of mixed micelles on the reaction of 4-nitrophenylbis(chloromethyl)phosphinate with PEI was shown. The catalytic effect depends on the degree of substitution of PEI and composition of a surfactant mixture. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1359–1365, August, 2006.     

Investigation of the interactions in emulsions stabilized by a polymeric surfactant and its mixtures with an anionic surfactant

 The interaction of a nonionic polymeric surfactant with an anionic surfactant at the oil–water interface has been studied by its effects on the droplet size, stability and rheology of emulsions. Oil-in-water (o/w) emulsions were prepared using isoparaffinic oil and mixtures of a nonionic polymeric surfactant with an anionic surfactant. The macro-molecular surfactant was a graft copolymer with a backbone of polymethyl methacrylate and grafted polyethylene oxide (a graft copolymer with PEO chains of MW=750). The anionic surfactant was sodium dodecyl sulfate (SDS). The stabiliza-tion of the emulsion droplets was found to be different when using one or the other surfactant. The mechanism of stabilization of emulsion droplets by the macro-molecular surfactant is of the steric type while the stabilization by anionic surfactant is of the electrostatic repulsion type. Emulsions stabilized with mixtures present both types of stabilization. Other effects on the preparation and stabilization of emulsions were found to be dependent on properties associated with the surfactant molecular weight such as the Marangoni effect and Gibbs elasticity. The initial droplet size of the emulsions showed a synergistic effect of the surfactant combination, showing a minimum for the mixtures compared to the pure components. Emulsion stability also shows a synergistic interaction of both surfactants. Rheological measurements allow for the estimation of the interparticle interaction when measured as a function of volume fraction. Most of the effects observed can be attributed to the differences in interfacial tension and droplet radius produced by both surfactants and their mixtures. The elastic moduli are well explained on the basis of droplet deformation. Ionic versus steric stabilization produce little difference in the observed rheology, the only important differences observed concerned the extent of the linear viscoelasticity region. Received: 22 November 1996 Accepted: 24 March 1997     

Formation at low surfactant concentrations and characterization of mesoporous MCM-41

At low concentrations of cetyltrimethylammonium bromide,all silica-based mesoporous materials with hexagonal phase have been synthesized via interactions between self-assembled surfactant molecule aggregates and aniomc silicate polymers.The resulting materials are characterized by XRD,FT-IR,solid state 29Si MAS NMR,thermal analysis and N2 adsorption-desorption measurements.After soluble ions are removed,the interactors between surfactant micelles and silicate polymers are reorganized and then form mesostructures 1 he hexagonal framework is sonsistent with amorphous silica gel.The structures of materials depend on the synthesis conditions Hydrothermal process improves the interactions between molecules and increases the degree of framework silicon atom polymerization The.surface area and the mesopore volume of the material prepared at 100℃ increase by 87% and 71 %,respectively,compared with those obtained at room temperature.     

氟烷基三甲基硅化合物的合成和反应研究

羰基化合物的氟烷基化反应是把含氟基团引入有机分子中去的一个重要手段。文献报道的主要是通过氟烷基金属试剂来进行此反应。但氟烷基金属试剂不太稳定,容易分解。这就给它们的应用带来了许多不便。我们发现,氟烷基三甲基硅化合物(1)作为氟烷基阴离子前体,在比较温和的条件下,便可使醛发生氟烷基化反应。首先,参照文献方法,通过氟烷基格氏试剂与三甲基氯硅烷反应,方便地制得了两个新的氟烷基三甲基硅化合物 R_F-SiMe_3(1)。     

Highly hydrophobically modified polyelectrolytes: Field variables to control emulsion type

Highly hydrophobically modified (with n-dodecylamide chain) linear poly(acrylic acid)s (HHMPAAH) and poly(sodium acrylate)s (HHMPAANa) with various degrees of grafting (τ) were synthesized and used as emulsifiers of the n-dodecane/water system. The type of emulsion, oil in water (O/W) or water in oil (W/O), was investigated as a function of the polymer chemical structure (τ, salt or acid form of the copolymer) and aqueous phase electrolyte concentration (NaNO₃). Increasing τ and/or salt concentration was found to favor the formation of inverse emulsions. Direct liquid–liquid dispersions are more likely to form with poly(sodium acrylate)s than with poly(acrylic acid)s. Hence, field variables such as τ, pH and ionic strength are relevant parameters to control emulsion type. Moreover, a balanced polyelectrolyte neither soluble in oil nor in water was synthesized for the first time. With this original emulsifier, the dispersion type was found to change from O/W to W/O with polymer salting out. The work provides convenient model system for fundamental studies of polymer conformation at liquid–liquid interfaces. Received: 31 March 1998 Accepted: 30 April 1998     

介孔分子筛MSU-1的合成

MSU X介孔分子筛具有三维立体交叉排列的蠕虫状孔道结构,有利于客体分子在其孔道内扩散[1]。目前合成MSU X的原料[2 4]TEOS水解速度慢,合成过程较易控制,但价高、易燃、有刺激性。本文采用文献[5 7]法,以水玻璃、A(EO)9为原料,在酸性至近中性的范围里合成了MSU 1介孔分子筛,与TEOS为原料的MSU 1合成进行了比较,考察了pH值和不同类型表面活性剂(脂肪醇聚氧乙烯醚和烷基酚聚氧乙烯醚)对产物结构性质的影响。1　实验部分1 1　试剂和仪器水玻璃(SiO2%≈26、Na2O%≈8),工业级,青岛海洋化工厂生产;脂肪醇聚氧乙烯醚非离子表面活性…     

磷酸酯甜菜碱两性表面活性剂的合成与性能

磷酸酯甜菜碱从皮肤溶出的氨基酸量少,脱脂低,毒性和刺激性低,易降解,是一类性能优良两性表面活性剂[1,2]。它的合成大多以长链卤烷或胺为原料,成本较高。本文以高级脂肪醇、氯乙醇以及二甲胺为原料、P2O5为磷酸化剂,合成了C12H25OCH2CH(OOCCH3)CH2N+(CH3)2CH2CH2OP(O)(O )(OH)磷酸酯甜菜碱。测定了表面张力、泡沫性能、钙皂分散力及增溶能力。1　合成十二烷基缩水甘油醚(Ⅰ)[2]　在500ml三颈烧瓶中加入月桂醇0 2mol,正已烷200ml和四丁基溴化铵0 01mol;在室温和强烈搅拌下加入50%的NaOH水溶液48g,滴加环氧氯丙烷0 4mol后升…