Carnation‐like CuO Hierarchical Nanostructures Assembled by Porous Nanosheets for Nonenzymatic Glucose Sensing

Carnation‐like CuO hierarchical nanostructures assembled by ultrathin porous nanosheets were successfully fabricated via a facile solvothermal route followed with heat treatment. As‐prepared CuO nanostructures exhibited excellent catalytic activity toward glucose oxidation in the absence of any enzymes. Under the optimized conditions, the CuO‐based enzymeless glucose sensor showed high sensitivity of 3.15 mA mM^?1 cm^?2, low limit of detection (98 nM, S/N=3), good reproducibility, excellent selectivity and long‐time stability. The superb nonenzymatic glucose sensing performance of the CuO hierarchical nanostructures was attributed to the highly catalytically active sites at the edges and basal planes of the CuO nanosheets, facile transportation of analytes through the abundant mesopores and macropores, robust and stable hierarchical structure. Moreover, the CuO‐based enzymeless glucose sensor showed high accuracy and reliability in comparison with clinical glucometer for quantitative determination of glucose in human blood serum samples.     

Multi‐responses Methodology Applied in the Electroanalytical Determination of Hair Dye by Using Printed Carbon Electrode Modified with Graphene

This paper describes a rapid and sensitive method for determination of the hair dye Basic Blue 41 in wastewater samples using screen‐printed carbon electrodes modified with graphene (SPCE/Gr). The method is based on the reversible reduction of azo groups of the dye at potential of ?0.23 V/?0.26 V, where both the anodic and cathodic currents increased 1,300 % when compared to screen‐printed carbon (SPCE) and glassy carbon electrodes (GCE). The optimization of a square wave voltammetric method was performed by means of 2³ factorial design, Doehlert matrix and multi‐response assays, and the best parameters were: frequency (54.8 Hz), step potential (6 mV), pulse amplitude (43.7 mV) and pH 4.5. The analytical curve was constructed from 3.00×10^?8 to 2.01×10^?6 mol L^?1, with detection and quantification limits of 5.00×10^?9 and 1.70×10^?8 mol L^?1, respectively. The repeatability of the method evaluated for 10 consecutive measurements at concentrations of 1.70×10^?7 mol L^?1 and 1.70×10^?6 mol L^?1, showed relative standard deviation of 3.56 and 0.57 %, respectively. The sensor based in SPCE/Gr was successfully applied in wastewater samples collected from a drinking water treatment plant and validated by comparison with HPLC‐DAD method with good accuracy.     

The Role of Ligand Topology in the Decomplexation of Luminescent Lanthanide Complexes by Dipicolinic Acid

In this study, we present the aqueous solution behavior of two luminescent lanthanide antenna complexes (Eu³⁺? 1 , Dy³⁺? 9 ) with different ligand topologies in the presence of dipicolinic acid (DPA, pyridine‐2,6‐dicarboxylic acid). Macrocyclic (1,4,7,10‐tetraazacyclododecane‐1,4,7‐triacetic acid, DO3A, 9 ) and acyclic (1,4,7‐triazaheptane‐1,1,7,7‐tetraacetic acid, DTTA, 1 ) ligands have been selected to form a ratiometric pair in which Dy³⁺? 9 acts as a reference and Eu³⁺? 1 acts as a probe for the recognition of DPA. The pair of luminescent complexes in water reveals the capability to work as a DPA luminescent sensor. The change of emission intensity of Eu³⁺ indicates the occurrence of a new sensitization path for the lanthanide cation through excitation of DPA. NMR evidence implies the presence of free 1 and mass spectrometry shows the formation of emitting [EuDPA₂]^? as a result of a ligand exchange reaction.     

单入射波长及纤芯存在光致双折射的长周期光纤光栅的折射率传感分析

利用全矢量耦合模方程提出并分析了一种基于纤芯存在光致双折射的长周期光纤光栅的环境折射率传感测量方法.以波长为谐振波长的完全偏振光为入射波,通过分析不同环境折射率下输出光的偏振态在邦加球上与参考点间球面距离的变化测量环境折射率.分析表明,在环境折射率1～1.30范围内包层半径为20.75 μm的长周期光纤光栅传感器线性特性良好,灵敏度为0.356/RIU,可应用于湿度和气体的折射率测量;该分析方法适用于其他类型的双折射长周期光纤光栅传感器的设计.     

基于二阶Loyt-Sagnac干涉仪的灵敏度增强温度传感器

通过在基于高双折射光纤Sagnac干涉仪的Sagnac环内增加一段高双折射光纤并控制两段高双折射光纤的熔接角度,设计制作了二阶Loyt-Sagnac干涉仪结构.利用Jones矩阵对反射谱特性进行了理论推导,对光束入射角度和高双折射光纤长度进行了优化,并对两种结构的干涉仪温度传感器进行仿真和实验.仿真结果表明,利用二阶Loyt-Sagnac干涉仪结构的游标效应,能提高其作为温度传感器时的灵敏度;实验结果证明,单段Sagnac环干涉仪温度传感器灵敏度为-1.46nm/℃,而使用二阶Loyt-Sagnac干涉仪的温度传感灵敏度为-17.99nm/℃,提高了约12.32倍.     

基于法布里-珀罗标准具和多光栅校准的光纤布喇格光栅波长解调系统

为了消除由法布里-珀罗标准具的干涉峰偏移引起的光纤布喇格光栅波长解调误差,采用多参考光栅进行法布里-珀罗标准具波长校准,搭建了相应的光纤布喇格光栅解调平台.将待解调光栅、法布里-珀罗标准具和多个参考光栅分别接入采样通道,用多个参考光栅对法布里-珀罗标准具进行波长校准,得到准确度较高的标准具干涉峰波长,再以此波长计算待测光栅波长,降低了校准误差.实验结果表明,利用该方法搭建的光纤布喇格光栅解调系统校准的重复性误差小于1.6pm,波长解调误差低于1.8pm.     

可双参量同时测量的光纤磁场传感器

设计并制作了一种马赫-曾德尔干涉仪(Mach-Zehnder Interferometer,MZI)与光纤布喇格光栅级联的光纤磁场传感器,其中MZI由相当于分光器的锥结构和相当于耦合器的花生锥结构级联组成,封装在填充了磁流体的毛细管中.由于磁流体的有效折射率会随着外界磁场强度的改变而变化,故可通过观察干涉谱的特征波长的变化来测量外界磁场强度,而光纤布喇格光栅透射峰对磁场强度不敏感.当磁场强度由0mT变化到20mT时,马赫-曾德尔干涉峰的灵敏度为0.11nm/mT.温度特性实验测得马赫-曾德尔干涉峰和光纤布喇格光栅透射峰的温度灵敏度分别为0.401 5nm/℃和0.011 4nm/℃.因此,可利用敏感矩阵实现双参量同时测量.     

片上制备横向结构ZnO纳米线阵列紫外探测器件

将纳米技术与传统的微电子工艺相结合, 片上制备了横向结构氧化锌(ZnO)纳米线阵列紫外探测器件, 纳米线由水热法直接自组织横向生长于叉指电极之间, 再除去斜向的多余纳米线, 其余工艺步骤与传统工艺相同. 分别尝试了铬(Cr)和金(Au)两种金属电极的器件结构: 由于Cr电极对其上纵向生长的纳米线有抑制作用, 导致横向生长纳米线长度可到达对侧电极, 光电响应方式为受表面氧离子吸附控制的光电导效应, 光电流大但增益低, 响应速度慢, 经二次电极加固, 纳米线根部与电极金属直接形成肖特基接触, 光电响应方式变为光伏效应, 增益和速度得到了极大改善; 由于Au电极对其上纵向生长的纳米线有催化作用, 导致溶质资源的竞争, 相同时间内横向生长的纳米线不能到达对侧, 而是交叉桥接, 但却形成了紫外光诱导的纳米线间势垒结高度调控机理, 得到的器件特性为最优, 在波长为365 nm的20 mW/cm²紫外光照下, 1 V电压时暗电流为10^-9 A, 光增益可达8×10⁵, 响应时间和恢复时间分别为1.1 s和1.3 s.     

基于改进蚁群算法的LEACH协议研究

针对LEACH协议在数据传输阶段,簇首与汇聚节点之间采用单跳模式传输数据使得能量消耗快并且不均衡的问题,提出一种基于改进蚁群算法的新型路由协议。该协议利用了能耗因子对蚁群转移概率以及信息素更新进行改进,充分考虑了节点的剩余能量和节点间距离,通过信息素的建立和更新,寻找簇首节点和基站之间的最优传输路径,进行多跳传输模式,从而均衡簇首节点能量消耗。仿真实验结果表明,改进后的ACO-BEC协议较之于LEACH协议,能够有效降低了整个网络能量消耗,延长了网络寿命。