The effect of Nb addition on the thermal stability and magnetic properties of Fe-based amorphous alloys with a wide supercooled liquid region

We have examined the effect of Nb addition on the thermal stability of the supercooled liquid before crystallization, the glass-forming ability and magnetic properties for the amorphous alloy series Fe₇₃Nb_xAl_5-xGe₂P₁₀C₆B₄ and Fe₆₃Co₇Nb_xZr_10-xB₂₀. The supercooled liquid regions (ΔT_x=T_x-T_g) have maximum values of 66 and 79K, respectively, for Fe₇₃Nb₁Al₄Ge₂P₁₀C₆B₄ and Fe₆₃Co₇Nb₄Zr₆B₂₀ alloys. The saturation magnetization σ_s of the Fe₇₃Nb_xAl_5-xGe₂P₁₀C₆B₄ alloy system is much higher than that of the Fe₆₃Co₇Nb_xZr_10-xB₂₀ alloy system, and is almost unchanged with an increasing Nb content from 0 to 3 at%. But the σ_s of the Fe₆₃Co₇Nb_xZr_10-xB₂₀ alloys decreases linearly with increasing Nb content. The coercive force H_c of the two alloy series can have a minimum value of 31A/m for Fe₇₃Nb₁Al₄Ge₂P₁₀C₆B₄ and 37A/m for Fe₆₃Co₇Nb₄Zr₆B₂₀. All these values are for the ribbons annealed at 773 and 873K for 15min in vacuum.     

Mg0.9Ti0.1Ni0.85Co0.15合金的石墨粉及镍粉球磨表面包覆性能

选用非晶态的Mg0.9Ti0.1Ni0.85Co0.15合金粉末与石墨粉及镍粉进行球磨表面包覆。SEM分析结果表明,己包覆石墨和镍粉的合金表面上吸附着一层小的颗粒,形成薄层将原来的合金表面包覆起来。使用XPS分析了合金表面元素。结果表明,包覆石墨粉后,合金表面碳元素的质量分数和原子分数均增加,Mg的质量分数从22.74%减小至22.23%,原子分数从36.43%减小到32.94%,从而减小了Mg在碱液中的腐蚀几率,提高合金的抗腐蚀性能;包覆镍粉后,合金表面Ni的质量分数由59.89%增加到60.04%,原子分数由40.63%增加到41.02%,形成合金表面富Ni的保护层,提高了合金的抗腐蚀性能。充放电循环测试表明,循环30周后,包覆石墨粉的合金电极容量保持率为32.05%,包覆镍粉的合金电极容量保持率为41.26%,而未包覆的电极容量保持率仅为17.88%。合金电极极化曲线测试结果表明,石墨或镍粉的包覆提高了Mg0.9Ti0.1Ni0.85Co0.15合金电极的循环稳定性和在KOH碱液中的抗腐蚀性能。     

超细非晶态NiCoB合金催化剂的制备及其对大豆油加氢活性研究

对大豆油、菜籽油等植物油的选择性加氢和深加工己成为加氢领域需要迫切解决的问题,新型催化剂的研发是油脂氢化的关键。     

Effect of Heat Treatment on Structure and Magnetic Performance of Ni-Fe-P Alloy Obtained by Electroless Plating

The electroless deposition of Ni68-Fe10.5-P21.5 alloy has been investigated. The crystallization behavior of the deposit was comparatively studied by using differential scanning calorimetry and X-ray diffractometry. The deposit transforms into a square Ni3P phase at 380. 0 ℃, then changes into a cubic FeNi3 phase at 490. 0 ℃. The microhardness, the size of the formed grains and the magnetic performance of the deposit increase with the increase of the heat treatment temperature below 500 ℃, then they decrease after this temperature. The effect of heat treatment time at 500 ℃ on the surface micromorphology, the structure and the magnetic performance of the deposit were also studied. The resuits show that with the increase of heat treatment time, the extent of crystallization of the deposit increases and the size of the formed grains becomes uniform. The results also show that the magnetic performance of the deposit under heat treatment for 40 min is maximal and then decreases with the increase of heat treatment time. The property change of the deposit is related to the crystal structure and the size of the formed grains of the deposit.     

螺旋纳米碳纤维的制备与表征

利用氢电弧等离子体法制备了纳米铜-镍合金作为催化剂,通过乙炔的催化热解制备了对称生长的螺旋纳米碳纤维.并用扫描电子显微镜(SEM)、透射电子显微镜(TEM)和红外(IR)对其进行表征,发现在单个纳米铜-镍合金粒子上对称生长出两根螺旋纳米碳纤维,它们的旋向相反,但是具有相同的螺旋直径、螺旋长度和碳纤维直径,而且纳米铜-镍合金粒子也有各种不同的形状.此外,这两根对称生长的螺旋纳米碳纤维之间的夹角也不同,分别为60°,90°,110°和160°.IR结果表明,螺旋纳米碳纤维分子结构中既含有不饱和的CC双键,又含有饱和的-CH₂-和-CH₃-基团.然而,利用氢电弧等离子体法制备的纳米铜和纳米镍作为催化剂,催化热解乙炔,得到的产物均是直线型碳纤维.     

Ni-Fe-B/MCM-41非晶态合金的合成与表征

用化学还原沉积法制备了Ni-Fe-B／MCM-41负载型非品态合金催化材料。通过XRD,FT-IR,TPR,SEM,TG及BET研究了非晶态合金对介孔分子筛载体结构的影响及非晶态合金负载后性质和形态的变化。结果表明：非晶态合金没有破坏介孔分子筛的结构,Ni-Fe-B／MCM-41的热稳定性和氧化能力与Ni-Fe-B相比,均有一定提高。     

二溴对甲基偶氮磺光度法测定低合金钢中的铅含量

研究显色剂二溴对甲基偶氮磺与铅 (Ⅱ )的反应 ,建立了直接测定低合金钢中铅含量的光度分析方法。在 0 .6mol/L硝酸溶液中 ,铅 (Ⅱ )与二溴对甲基偶氮磺形成 1∶2的蓝色配合物 ,最大吸收波长为 6 30nm ,表观摩尔吸光系数为 1.2 2× 10 5L/(mol·cm) ,铅 (Ⅱ )含量在 0～ 2 .0 μg/mL范围内服从比耳定律。用该方法对合成样品中的铅含量进行测定 ,平均回收率为 10 0 %～ 10 1% ,RSD为 2 .5 %～ 4 .0 %。     

电沉积工艺对Mg-Ni储氢合金的电化学性能的影响

用电沉积的方法制备了镁 镍储氢合金,探讨了电沉积条件对合金的电化学性能的影响.XRD显示沉积层中含有非晶态Mg Ni相和微晶态Mg相.AAS分析表明沉积合金中Mg的摩尔分数达 8. 57%.合金的放电容量最高为 75. 547mA·h·g-1.     

Mg_(2-x)La_xNi及Mg_(2-x)Ce_xNi合金的腐蚀性能研究

应用电化学方法研究了Mg2-xLaxNi及Mg2-xCexNi储氢合金的腐蚀性能.恒电位极化和交流阻抗测试表明,经Ce或La取代后的合金,其前者腐蚀电流及电化学极化电阻均随Ce取代量增加而降低,而后者的腐蚀电流却随La取代量的增加而增加,但极化电阻则呈先降后升趋势.合金极化后SEM测试显示,经Ce取代后合金表面较平整,而用La取代的则明显有裂纹.作者认为这主要与La、Ce的氧化物的结构有关.     

扫描微电极法原位测量2024Al合金表面微区Cl~-浓度分布

应用自研制扫描微电极测量系统和扫描微Ag/AgCl复合电极 ,原位测量含Cl- 溶液中 ,2 0 2 4Al合金在其局部腐蚀发生发展过程中金属 /溶液界面微区Cl- 离子的浓度分布 ,考察金属 /溶液界面微区Cl- 浓度分布对Al合金表面局部腐蚀行为的影响 .结果表明 ,扫描Ag/AgCl探针可实时跟踪腐蚀过程中金属表面氯离子浓度分布的动态行为 .当 2 0 2 4Al合金浸渍于含Cl- 溶液中 ,Cl- 离子在Al合金 /溶液界面呈不均匀分布 ,Cl- 主要在第 2相颗粒和铝基交界区域发生优先吸附和累积 ,从而促进局部腐蚀的发生和发展