Studies on Synthesis and properties of Mg-Al-nitrate Layered Ouble Hydroxides

A positive Mg-Al-nitrate layered double hydroxides(LDHs) has been synthesized using a non-steady coprecipitation method.The shape.size,chemical composition,electrical property and anion exchange property of the positve nanoparticle were studied by SEM,XRD,FTIR,chemical analysis,spectroanalysis and meaxsuring of electrophoretic mobilities.Preliminary results show the positive nanoparticle is a promising precursor of polymer/LDHs nanocomposite.     

Compression Behaviour of Ni77P23 Amorphous Alloy up to 30.5 GPa

The compression behaviour of Ni77P23 amorphous alloy is investigated at room temperature in a diamond-anvil cell instrument using in-situ high pressure energy dispersive x-ray diffraction with a synchrotron radiation source. The equation of state is determined by fitting the experimental data according to the Birch-Murnaghan equation. It is found that the structure of Ni77P23 amorphous alloy is stable under pressures up to 30.5 GPa. Within the pressure range from zero to the experimental one, the pressure-induced structural relaxation is reversible.     

Viscosity Characteristic in Metallic Melts with Medium／Short-Range Order Structures

Viscosities and liquid structure of alloys Cu75Al25, Cu87Sn13 and Al-12.5%Si and pure metals Cu and Sn are investigated by using torsional oscillation viscometry and high temperature x-ray diffractometry. The viscosities of pure metals and eutectic alloy melts along with the short-range order structure are found to follow the Arrhenius law in a wide range of temperature above the liquidus. The breakpoints in Arrhenius plots emerge when the structures of alloy melts are transformed from the medium-range order structure to the short-range order structure. It has been found that the change of the viscosity of the metallic alloys is a characteristic of microstructure transformation in the related melts.     

辐射加热金X光再发射时间测量

利用星光Ⅱ三倍频激光打双盘靶，研究了辐射加热材料的Ｘ光发射时间。激光脉冲能量４０～６０Ｊ、脉冲宽度６００～７００ｐｓ。通过两台时间关联的亚千Ｘ光能谱仪分别监测双盘靶初、次级发射Ｘ光谱，给出了辐射加热次级Ｘ光再发射时间。     

模拟纳米晶体原子分布及X射线散射理论图案

通过分子动力学方法模拟纳米晶体（1—3nm）的结构．利用模拟的结果，进行了X射线衍射及径向分布函数的模拟计算．结果表明：纳米晶体晶界呈短程有序，界面原子间距分布很宽；随着晶粒尺寸的减小，晶粒的畸变越大，原子体积常数也明显增大 关键词：     

SiC多型体X射线定量分析的Rietveld方法

鉴于ＳｉＣ多型体的主要衍射线完全重叠，用常规Ｘ射线粉末衍射方法确定ＳｉＣ陶瓷材料中多型体含量的分布是非常困难的，提出以Ｘ射线粉末衍射全谱拟合的Ｒｉｅｔｖｌｄ方法进行ＳｉＣ多型体定量分析，阐述了原理及方法，对含３Ｃ，４Ｈ，６Ｈ和１５Ｒ４种多型体衍射数据的定量分析结果表明，Ｒｉｅｔｖｅｌｄ方法可对ＳｉＣ材料中常见多型体的定量分析给出准确的结果，还给出了各自的标准偏差，并估计了该方法对各多型体能给出精确     

黑洞的观测证认

介绍了Ｘ射线双星中的黑洞和星系核心的黑洞的观测证认状况．     

共振原子蒸气中激光脉冲的时空特性

在柱对称条件下，利用耦合的布洛赫－麦克斯韦方程，研究了激光脉冲在原子蒸气介质中的共振传播。考察了脉中在时空中的演化。数值计算结果表明激光脉冲在传播中，由于自感应透明与光波的衍射效应，表现出复杂的相干现象。     

边界衍射波理论公式的准确性数值分析

利用数值分析的方法分析了由边界波理论公式所得的圆形光阑衍射场的光强分布.通过对边界波理论公式所得的光强分布曲线,对几何照明区与阴影区的光强分布曲线与面衍射积分公式所得的光强分布曲线进行比较,分析了边界波理论公式对衍射场描述的准确性.     

无碎屑激光等离子体软X射线源的研究及应用前景

分析了常规金属靶激光等离子体源产生固体碎屑的原因及其对软Ｘ射线光学元件的危害，介绍了近年来发展起来的无碎屑激光等离子体软Ｘ射线源，归纳了无碎屑激光等离子体软Ｘ射线源的几种形式和特点，并且描述了这种新型光源在软Ｘ射线显微术及光刻术中的应用．