原油三维荧光分析中猝灭现象辨析

研究了原油的三维荧光猝灭现象，指出浓度过高是原油产生荧光猝灭的主要原因，将会造成三维荧光等值线图畸变，致使定量分析数据失真，谱图特征变异，难以获取原油特征三维指纹图。提出了避免荧光猝灭的预试方法，并列出了不同类型原油的最佳测试浓度。     

一维链状冠醚配合物:[{Na(18-C-6)}2(H2O)]n[M(SCN)4]n(M=Pd、Pt)的合成与结构

The reactions of 18-crown-6 with Na₂[M(SCN)₄] (M= Pd,Pt) were studied and the complex 1 [{Na(18-C-6)}₂(H₂O)]_n[Pd(SCN)₄]_n and complex 2 [{Na(18-C-6)}₂(H₂O)]_n[Pt(SCN)₄]_n were characterized by ele-mental analysis, IR and X-ray diffraction analysis. The complexes belong to monoclinic, space group P2₁/n with cell dimensions, 1:a=1.05734(7),b=1.42250(10),c=1.47762(10) nm,β=107.5330(10)°,V=2.1192(2)nm³,Z=2,D_calcd=1.460g·cm^-3,F(000)=964,R₁=0.0406,wR₂=0.1264 and 2:a=1.05985(19),b=1.4237(3),c=1.4744(3) nm,β=107. 096(3)°, V=2.1264(7)nm³,Z=2,D_calcd=1.690g·cm^-3,F(000)=1028,R₁=0.0292,wR₂=0.0859. In the solid state, the complexes 1 and 2 show an one-dimensional chain of [{Na(18-C-6)}₂(H₂O)]²⁺ complex cations and [M(SCN)₄]^2- (M=Pd,Pt) complex anions bridged by Na-N in-teractions.     

无机胶体法制备Pt/C催化剂及其性能表征

采用无机胶体法制备用于质子交换膜燃料电池(PEMFC)的Pt/C催化剂。研究了影响PtO₂胶体生成和稳定性的因素(溶液的pH值、浓度和温度条件等)以及不同还原剂浓度对Pt/C催化剂性能的影响。透射电子显微镜测试结果表明，采用经优化的工艺条件所制备的Pt/C催化剂平均粒径为3 nm，且分散性好、粒度均匀。X-射线衍射分析表明，催化剂中Pt(111)晶面的相对含量较高，有利于加速氧还原反应。单体PEMFC的电压/电流密度曲线测试表明，所制备的Pt/C催化剂具有良好的电化学性能。     

天然蚕丝与丝素蛋白多孔膜的生物降解性研究

较为详细地研究了经不同条件处理的丝素蛋白多孔膜材料和天然蚕丝在蛋白酶作用下的降解性能以及降解前后材料的微观形貌和结构的变化. 结果表明, 丝素蛋白材料中不同结构(构象)的含量是影响其降解速度的一个重要因素. 对于由再生丝素溶液所制备的材料, 调控其中Silk II结构(β-折叠构象)的比例可能是控制丝素蛋白材料降解速度的有效途径.     

Preparation and Characterization of Nano-ZnFe2O4/TiO2 Films

The nano-ZnFe2O4/TiO2 films possess the functions of desulfurization and degradation for organic pollutants. The sols of ZnFe2O4/TiO2 were prepared by sol-gel method and coated on glass and porous ceramic by vertical coating and dipping-lift processes, respectively, and the samples were obtained after drying and sintering. The composition, appearance, absorption spectrum of the films, and the influence of the film on porous ceramic performances were analyzed using SEM, AFM, UV-Vis spectrometer, and mercury porosimeter, respectively, to determine the operation parameters of the multifunction porous ceramic elements for gas-purification.     

有序自组装聚合物纳米结构

采用水辅助方法(water-assisted fabrication method),分别以4-十二烷基苯磺酸掺杂的聚苯胺(PANI-DBSA)和聚2-甲氧基-5-(2′-乙烯基-己氧基)苯乙炔(MEH-PPV)两种功能高聚物为成膜材料,冷凝水滴为模板,利用水滴在聚合物溶液表面的自组装,制备出了两种纳米层次以上的蜂窝状有序多孔聚合物薄膜.通过原子力显微镜和共聚焦荧光显微镜对其形貌、电学性质和荧光图像进行了表征.     

CeO2及Pt/CeO2催化剂上H2、O2的作用特性

采用TPD、TPR、FT-IR和TPEC等方法研究了CeO_2及Pt/CeO_2上H_2、O_2作用特性。结果表明, Pt促进CeO_2还原, 并形成高活动性氢物种。Pt的存在使吸H_2和放氢温度下阵达300 ℃。部分还原的CeO_2常温下吸附氧形成分子离子氧物种(O_2~-, O_2~(2-)), Pt的存在改变氧化铈催化剂在常温下氧吸附物种的形态, 以解离态存在。氧化铈上吸附的氧物种在升温时可部分脱附, 高于170 ℃时则转化为晶格氧。     

ZrxTixAl1-2xO2的制备及其在三效催化剂上的应用

Zr_0.5Ti_0.5O₂(ZT) and Zr_0.25Ti_0.25Al_0.5O₂(ZTA) mixed oxides were prepared by co-precipitation method and characterized by low temperature adsorption-desorption， XRD and NH₃-TPD. The activity of Pt/Zr_0.5Ti_0.5O₂ and Pt/ Zr_0.5Ti_0.5Al_0.5O₂ catalysts was evaluated using the simulated gases. The results show that ZTA samples exhibit higher specific surface area， larger pore volume and proper surface acidic amount and acidity in comparison with ZT. The results of the catalytic test indicate that Pt/ZT and Pt/ZTA catalysts exhibit excellent low-temperature catalytic activity and lower light-off temperatures of hydrocarbon， carbon monoxide and nitrogen oxides， especially better conversion for nitrogen oxides (NO_x). The addition of Al₂O₃ into ZT enhanced the anti-aging property of Pt/ ZTA catalysts due to the excellent textural， structural， surface acidity and thermal stability.     

多孔岩心的渗透性

The relaxation properties of water saturated in porous core are discussed and the distribution of proton transverse relaxation time and bi-exponential model of longitudiual relaxation time are obtained, which provide an illustration for two-model of fluids saturated in porous media. The cutoff value of T_1 based on relaxation specific property of fluids in porous core is adopted to improve the correlation between permeability and ?4T1b2.     

微孔配位聚合物作为新型储氢材料的研究

微孔配位聚合物性质独特、结构多样，具有广泛的应用前景，它已成为近几年来一个热门的研究领域。本文简要介绍该类化合物作为一种新型的储氢材料，在合成、结构和储氢性能方面的研究进展。