Synthesis and Crystal Structure of [{Cd(hmbdc)(H_2O)_3}·2H_2O]_n

A novel coordination polymer [{Cd(hmbdc)(H2O)3}·2H2O]n (hmbdc = 5-hydroxy- isophthalic acid) has been synthesized and characterized by elemental analysis, IR spectra and single-crystal X-ray diffraction. The crystal belongs to monoclinic, space group P21/c, with a = 9.599(3), b = 18.699(5), c = 7.557(2) , β = 108.198(4)°, V = 1288.6(6) 3, Z = 4, Mr = 382.60, Dc = 1.972 g/cm3, F(000) = 760, μ = 1.740, the final R = 0.0555 and wR = 0.0995 for 1732 observed reflections with I > 2σ(I). The structural analysis shows that the intermolecular hydrogen bonds and π-π interactions result in a three-dimensional supramolecular framework.     

新型6-氟-4(3H)-喹唑啉酮类Schiff碱的合成及其抑菌活性

以2-氨基-5-氟苯甲酸为起始原料，与醋酐酰化关环制得6-氟-2-甲基噁嗪-4-酮(1)； 1在80%水合肼中回流反应制得6-氟-2-甲基-3-氨基-4(3H)-喹唑啉酮(2)； 2分别与羟基芳醛和杂环芳醛反应合成了6个6-氟-4(3H)-喹唑啉酮类Schiff碱（3a~3f），其中3b~3f为新化合物，其结构经¹H NMR， ¹³C NMR， IR和元素分析表征。采用琼脂扩散法研究了3a~3f对大肠杆菌、金黄色葡萄球菌和枯草杆菌的抑制活性。结果表明：用药浓度为400 μg·mL^-1时，3a~3f对受试菌种均有一定的抑制活性，其中6-氟-2-甲基-3-(4-吡咯苯亚甲氨基)-4(3H)-喹唑啉酮(3c)抑菌活性最强，对大肠杆菌和枯草杆菌的抑菌圈直径分别为9.38 mm和9.00 mm。     

Mg改性对Co/γ-Al2O3-TiO2催化燃烧丙烷性能影响

采用分步浸渍法制备了系列Mg改性的Co/γ-Al_2O_3-TiO_2催化剂,通过X射线衍射(XRD)、紫外可见漫反射光谱(DR-UV-vis)、N_2吸附-脱附(BET)、X射线光电子能谱(XPS)和H_2程序升温还原(H_2-TPR)等技术对催化剂进行表征,并考察了其对丙烷燃烧的催化性能。结果表明,Co在原始γ-Al_2O_3-TiO_2载体和Mg改性MgO/γ-Al_2O_3-TiO_2载体上均以Co_3O_4的形式存在;Mg掺入后与Al_2O_3作用形成MgAl_2O_4尖晶石,改善了载体的织构性质,提升了Co_3O_4在催化剂载体表面的暴露数量和分散程度。此外,MgAl_2O_4与Co_3O_4相互作用提升了Co_3O_4颗粒表面Co~(3+)/Co~(2+)和O_(ads)/O_(latt)的比例,并削弱了Co-O键键能,从而提升了其对丙烷的催化燃烧活性。当Mg负载量为15%(质量分数)时,在Co/MgO(15%)/γ-Al_2O_3-TiO_2催化剂上进行丙烷燃烧,丙烷90%转化率的温度比无Mg掺杂的Co/γ-Al_2O_3-TiO_2催化剂的降低了45℃,并且连续反应40 h其活性保持稳定。     

含硅路易斯酸的发展及其在有机合成中的应用

综述了含硅路易斯酸R₃SiX [X＝I, OTf, NTf₂, C(C₆F₅)Tf₂等]和(R₃SiX＋ML_n)的发展、合成以及它们在有机合成中的应用. 它们主要被用来催化Aldol, 烯丙基化, Diels-Alder, Ene和Friedel-Crafts等反应. 催化剂的用量一般为0.5～20 mol%, 并随着催化剂的活性不同, 反应产率从一般到良好不等. 催化剂活性顺序为R₃SiNTf₂＞R₃SiOTf, (R₃SiX＋ML_n)＞R₃SiX. 也对近年出现的手性含硅路易斯酸的发展和应用进行了概述, 当手性双-(多氟甲磺酰)-亚胺基硅烷用于催化环戊二烯和丙烯酸甲酯的Diels-Alder反应时, ee值高达54%.     

桥联双β-环糊精对N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸的手性识别及机理研究

利用紫外-可见吸收和荧光发射光谱, 结合非线性最小二乘法拟合曲线以及分子力学(MM2)模拟系统地研究了手性分子N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸(PDP和PLP, 总称PPs)与β-环糊精(β-CD)、 2-位硒桥联双β-CD(2-SeCD)和2-位碲桥联双β-CD(2-TeCD)的包结能力大小及这3个环糊精对PPs手性识别能力的差异和识别机理. 研究结果表明, PPs不能与单疏水空腔的β-CD形成很好的包结复合物, 与具有较长桥联链的2-TeCD结合能力最强. 2-TeCD与PDP和PLP的结合常数分别为2.33×104和6.07×103 L/mol, 对PPs的手性识别比达到KD/KL=3.84, 高于2-SeCD(KD/KL=2.61). 用MM2模拟得出了PPs与这两个双环糊精形成复合物的三维结构: PPs的绝大部分位于双环糊精两个空腔之间, 但是在这两个复合物中, 苯环与芘环所成的二面角不同. 此外, PPs与这两个双环糊精作用时均存在明显的氢键相互作用, 且2-TeCD强于2-SeCD.     

2-取代吡啶半菁染料的无溶剂微波合成及光谱性质的理论研究

在微波促进无溶剂条件下, 由N-甲基-2-甲基吡啶碘盐与取代芳香醛在哌啶作用下合成了一系列2-取代的吡啶半菁染料, 产物结构由元素分析, ¹H NMR, MS, IR, UV得到确认. 该方法操作简便, 收率高. 在此基础上, 对N-甲 基-2-(p-N,N-二甲氨基-苯乙烯基)吡啶半菁染料的光谱性质进行了理论计算.     

锂离子电池正极材料LiMn2O4的合成与晶体结构（英）

Spinel LiMn₂O₄ powders were prepared using two-step synthesis method consisting of solid-state reaction method and citrate modified sol-gel method. The effects of the calcination temperature and the Li/Mn ratio of raw materials were studied on the physicochemical and electrochemical properties of the spinel LiMn₂O₄ powders, such as crystallinity, lattice constant and density. The title compound was characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Polycrystalline LiMn₂O₄ powers calcined at 750 ℃ were found to be composed of very uniformly-sized microcrystal with an average particle size of 300 nm. The improvement in electrochemical properties was mainly attributed to the process of re-grinding by absolute alcohol.     

KINETIC ANALYSIS OF CO-CONDENSATION POLYMERIZATION OF AB2 AND AB MONOMERS

This work deals with the kinetics of co-condensation polymerization of AB2 and AB monomers, giving expressions of the two-dimensional molecular weight distribution function and the number/weight average molecular weights of the resulting copolymers. The two-dimensional molecular weight distribution depends on two indices, n and l, which are the respective numbers of AB2 and AB units in a copolymer species. The evolution of the two-dimensional weight and z distributions during the co-condensation polymerization has been evaluated systematically. Finally, the two-dimensional distribution was transformed into a one-dimensional molecular weight distribution with only one variable (the molecular weight of the products instead of the degree of polymerization). The calculated results show that the highly branched copolymer has a very broad molecular weight distribution when the co-condensation polymerization approaches completion.     

K-La-Ni/Si-2催化低碳烷烃与二氧化碳重整制合成气(英文)

Ｎｉ／Ｓｉ２催化剂具有较好的低碳烷烃与二氧化碳重整制合成气的反应性能，添加Ｌａ２Ｏ３助剂和Ｋ２Ｏ助剂可提高催化剂活性和合成气收率，从而进一步改善催化剂的低碳烷烃与ＣＯ２重整制合成气的反应性能，研制的ＫＬａＮｉ／Ｓｉ２催化剂，用于天然气与ＣＯ２重整反应制合成气可达９７％的低碳烷烃转化率和９５％以上的合成气收率。     

负载型TiO2-聚酰亚胺亲水复合膜的制备与分离性能

采用溶解－流涎法，湿相转换法和干湿相转换法制轩了负载型ＴｉＯ２－聚酰亚胺亲水复合膜，采用扫描电镜，红外光谱，压汞和透气性实验等手段对该膜的孔径分布，表面结构及扩散性能进行了表征，并讨论了制备亲水对膜孔结构的影响，实验结果表明，三种膜均具有很好的亲水性能，而干湿相转换膜具有良好的孔径分布和分离性能。