Preparation of ω-tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides: Useful reagents for the synthesis of 1-(ω-mercaptoalkyl)-1,2-dihydrobuckminsterfullerenes (C60)

ω-Tetrahydropyran-2-ylsulfanylalkylmagnesium chlorides are prepared as Grignard reagents containing protected mercaptoalkyl chains, which are useful for the direct introduction of ω-mercaptoalkyl chains to electrophiles. In order to prove the usefulness of these reagents, they were reacted with buckminsterfullerene (C₆₀) to give 1-(ω-mercaptoalkyl)-1,2-dihydrobuck minsterfullerenes after the deprotection of THP group with TFA.     

Separation of salidroside from Rhodiola crenulata by high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) was used to purify salidroside from an extract of Rhodiola crenulata with two steps using a two-phase solvent system composed of ethyl acetate-n-butanol-water (1:4:5, v/v) in the first run and chloroform-methanol-isopropanol-water (5:6:1:4) in the second run. The method yielded 21.9 mg of salidroside from 1.216 g of the crude sample at 98% purity determined by HPLC analyses. Identification was performed by 1H NMR, 13C NMR, and MS.     

三(2-苯并咪唑亚甲基)胺硝酸镍(Ⅱ)配合物的合成及结构

三（２－苯并咪唑亚甲基）胺简称ＮＴＢ与Ｎｉ（Ⅱ）的硝酸盐形成配合物Ｃ２８Ｈ３５Ｎ９Ｏ９Ｓ２Ｎｉ。本文报道其合成，红外光谱及晶体结构。该化合物为三斜晶系，空间Ｐ１↑－，ａ＝９．６５０（３），ｂ＝１２．７１６（２），ｃ＝１４．４３６Ａ，α＝１１．４６（２），β＝９１．６６（３），γ＝９７．５５（２）°，Ｖ＝１７１８（２）Ａ＾３，Ｚ＝２，Ｆ（０００）＝７９３，Ｄｃ＝１．４８ｇ／ｃｍ＾３，Ｍｒ＝７６４．１     

气相色谱-质谱法测定茶叶中的噻嗪酮残留量

建立了气相色谱-质谱法测定茶叶中噻嗪酮残留量的方法。茶叶中残留的噻嗪酮用丙酮-正己烷混合溶剂(1∶1)提取,提取液经Envi-Carb活性碳柱和LC-Alumina N中性氧化铝柱净化,浓缩定容后,直接用气相色谱-质谱进行分析和确证,外标法定量。以HP-5MS(30m×0.25mm i. d., 0.25 μm)石英毛细管柱为分离柱,噻嗪酮的分离效果良好。方法的线性范围为0.01～1.00μg/mL,检出限为0.01mg/kg,回收率为81.6％～97.2％,相对标准偏差为3.36％～5.78％。质谱监测离子选m/z为105、140、172、305amu,其强度比约为41∶13∶29∶17。样品前处理采用微量化学技术。     

Single Atom Alloy Preparation and Applications in Heterogeneous Catalysis

There have been remarkable progresses in manipulating heterogeneous catalysts' nanostructures in the past decade. The concept of single atom alloy (SAA) was firstly proposed in 2012 when researchers successfully stabilized single Pd atoms on the Cu(111) surface. However, earlier work in 2009, which focused on replacing one Au atom with a Pd atom in thiolate protected Au₂₅ nanoclusters, could also be considered as the pioneer work of single atom alloy. Both kinds of single atom alloys exhibited the potential of maximum utilization of scarce elements and attractive catalytic performances. The well‐defined structures of SAA catalysts make accurate modeling possible, which further realizes the rational design of single atom alloy catalysts. In this review, we summarize the research trajectory of single atom alloys as well as recent achievements in this field. We also introduce several commonly adopted characterization methods for SAA catalysts such as scanning tunneling microscopy (STM), temperature programmed reaction (TPR), extended X‐ray absorption fine structure (EXAFS) spectra, matrix assisted laser desorption/ionization mass spectrum (MALDI‐MS) and differential pulse voltammetry (DPV). Through discussing recent progresses in SAA catalysts, we propose that future researches in this filed should be focused on exploring new kinds of metal nanocrystals and controlling the nanostructure of SAA even more precisely.     

PP／EPO共混体系混容性与结晶结构

WAXD方法测定表明PP/EPO共混体系的结晶度随EPO组份含量的增加而降低,晶胞参数与组份比无关,并计算了第二类晶格畸变。根据PP/EPO的DSC和扭辫实验得出在所有组成下PP/EPO共混体系是不相容的。但在非晶区可能部分相容。     

低温原子化石墨炉原子吸收法测定环境和生物样中的镉

本文描述了以氩/氢混合气体作保护气体,测定环境和生物样品中痕量镉的石墨炉原子吸收法。实验证明,与纯氩气作保护气体相比较用氩/氢混合气体作保护气体,能够降低镉的原子化温度(100℃),并且减少基体物质如MgCl_2和NaClO_4的干扰。这种改善氯化物和高氯酸盐基体干扰的机理,主要是由于氢的存在与基体中的氯形成高离解能的氯化氢,从而避免了通常在镉原子化之前形成易挥发的氯化镉而损失。用本方法测定了七种标准参考物质,结果与标准值一致,证明方法是可靠的。     

Density functional study of the l-proline-catalyzed α-aminoxylation of aldehydes reaction: The reaction mechanism and selectivity

The reaction mechanism of the l-proline-catalyzed α-aminoxylation reaction between aldehyde and nitrosobenzene has been investigated using density functional theory (DFT) calculation. Our calculation results reveal following conclusions [1]. The first step that corresponds to the formation of C–O bond, is the stereocontrolling and rate-determining step [2]. Among four reaction channels, the syn-attack reaction channel is more favorable than that of the anti one, and the TS-ss channel dominates among the four channels for this reaction in the step of C–O bond formation [3]. The intermolecular hydrogen bond between the acidic hydrogen of l-proline and the N atom of the nitrosobenzene in an early stage of the process catalyzes very effectively the C–O bond formation by a large stabilization of the negative charge that is developing at the O atom along the electrophilic attack [4]. The effect of solvent decreases the activation energy, and also, the calculated energy barriers are decrease with the enhancement of dielectric constants for C–O bond formation step. These results are in good agreement with experiment, and allow us to explain the origin of the catalysis and stereoselectivity for l-proline-catalyzed α-aminoxylation of aldehyde reaction. The addition of H₂O to substituted imine proline, intermolecular proton-transfer steps, and the l-proline elimination process were also studied in this paper.     

化学溶液分解法制备(Bi0.9Nd0.1)2Ti2O7薄膜

采用化学溶液分解法（CSD）在p—Si（111）衬底上制备了（Bi0.9Nd0.1）2Ti2o7薄膜。用X射线衍射技术分析了薄膜的结构和结晶性，结果显示，在600℃退火10min得到了结晶性较好、表面致密的多晶薄膜；用原子力显微镜描述了薄膜的表面形貌，与在XRD中观察到的择优取向是一致的；同时还研究了薄膜的电学性能。结果表明，在0～6V范围内，薄膜的漏电流小于1．53×10^10A；在室温100kHz下，其介电常数为166，介电损耗因子为0．227，显示出薄膜具有较好的绝缘性和介电性能。     

Polyarylate–polystyrene block copolymer from macro-azoinitiator: Synthesis and its thermal properties

A macro-azoinitiator containing polyarylate segment and azo group was prepared by the solution polycondensation of azobiscyanopentanoyl chloride and hydroxy-terminated polyarylates having viscosity-average molecular weights of 6200, 8100, and 12 400. These macro-azoinitiators were used in the radical polymerization of styrene to synthesize polyarylate-polystyrene block copolymers. Thermal properties measured by the differential scanning calorimetry indicated the phase separated morphology of the block copolymers except at low molecular weight of the block constituents. © 1993 John Wiley & Sons, Inc.