A post curing strategy toward the feasible covalent adaptable networks in polyacrylate latex films

The implementation of covalent adaptable networks (CANs) in general resin system is becoming attractive. In this work, we propose a simple post-curing strategy based on the core-shell structured acrylate latex for the achievement on both the improved general performance and the CANs characteristics in latex films. The building to the CANs was relied on the introduction of 4,4′-diaminophenyl disulfide as the curing agent, which cured the acetoacetoxy decorated shell polymer through the ketoamine reaction. The metathesis reaction of aromatic disulfides in the crosslinking segments enabled the thermally induced dynamic behavior of the network as revealed in the stress relaxation tests by comparison with other diamine crosslinking agents without the incorporation of disulfide. The synergism of the dynamic crosslinking of the shell polymer and static crosslinking in the core polymer contributed to the improved mechanical strength (15 MPa, strain% = 250%) and the suppressed water adsorption (~1% in 24 h of soaking) of the latex film, which exhibited above 90% of recovery in both strength and strain from a cut-off film damage within 1 h at 80°C. Moreover, the cured latex film could be recycled, and 75% of the mechanical performance was regained after three fragmentation-hot-pressing cycles. These, in addition with the feasible and environmental friendly characteristics, suggest a sustainable paradigm toward the smart thermosetting latex polymers.     

离子对反相高效液相色谱法同时测定尿液中复方α-酮酸片的5种有效成分

建立了同时测定尿液中复方α-酮酸片5种有效成分(消旋羟蛋氨酸钙(HMACa)、酮缬氨酸钙(KVCa)、消旋酮异亮氨酸钙(KILCa)、酮亮氨酸钙(KLCa)和酮苯丙氨酸钙(KPACa))的离子对反相高效液相色谱法。分别考察了离子对试剂浓度、缓冲盐浓度和流动相pH值等参数对分离情况的影响。最终采用Waters Symmetry C18色谱柱(250 mm×4.6 mm,5μm);以乙腈和含15 mmol/L四丁基氢氧化铵的20 mmol/L磷酸盐缓冲液(pH 7.0)为流动相进行梯度洗脱,流速为1.0 mL/min;柱温为35℃;检测波长为210 nm。在上述条件下,5种有效成分得到很好的分离,并且不受尿液中内源性基质的干扰,在20~200 mg/L范围内线性关系良好(r≥0.999 0);HMACa、KVCa、KILCa、KLCa和KPACa的检出限(S/N=3)分别为3.0、5.0、3.6、5.7和2.5 mg/L;定量限(S/N=10)分别为9.6、16.7、12.0、19.0和8.3 mg/L;日间、日内精密度均小于7%;平均回收率在86.79%~112.00%之间,RSD小于9%(n=5)。该方法准确,灵敏度高,重现性好,适用于尿液中这5种有效成分的检测。     

Selective Catalytic Isomerization of β-Pinene Oxide to Perillyl Alcohol Enhanced by Protic Tetraimidazolium Nitrate

A series of tetraimidazolium salts with different anions was prepared and applied in the isomerization of β-pinene oxide. After examining the activity of different catalysts, a remarkable enhancement of the selectivity of perillyl alcohol (47 %) was obtained over [PEimi][HNO₃]₄ under mild reaction conditions and using DMSO as the solvent. Furthermore, noncovalent interactions between solvent molecules and the catalyst were found by FT-IR spectroscopy and confirmed by computational chemistry. The homogeneous catalyst showed excellent stability and was reused up to six times without significant loss.     

单晶硅晶格间距的测量技术进展及应用

单晶硅晶格间距是许多重要物理常数测量的基础。本文介绍了硅晶格间距测量技术的发展历程,包括X射线干涉仪直接测量和晶格比较仪间接测量两种方法,以及影响测量结果不确定度的关键因素。得益于晶格间距测量的进展,在纳米尺度,硅晶格间距被国际计量局(BIPM)批准成为新的米定义复现形式。最后介绍了硅晶格在计量学中的应用,以及基于硅晶格实现纳米几何量测量的溯源体系的研究趋势。     

盐酸伊达比星杂质A的合成工艺优化及其高效液相分析

通过对盐酸伊达比星脱羟基杂质A的合成研究，为盐酸伊达比星的质控标准提供参考。以盐酸伊达比星为起始原料，经过4步反应得到脱羟基杂质A。本文提供了盐酸伊达比星杂质A的制备方法以及高效液相色谱分析方法，为杂质含量控制提供了依据。该工艺可以稳定、快速制备高纯度脱羟基杂质A，制备总收率为57.20%，纯度为57.20%，其结构经¹H NMR， ¹³C NMR和MS(ESI)表征。