Monte Carlo study on the low momentum μ-π identification of the BESⅢ EM calorimeter

The BESⅢ detector has a high-resolution electromagnetic calorimeter which can be used for low momentum μ-π identification. Based on Monte Carlo simulations, μ-π separation was studied. A multilayer perceptron neural network making use of the defined variables was used to do the identification and a good μ-π separation result was obtained.     

Reconstruction algorithm study of 2D interpolating resistive readout structure

Systematic investigations including both simulation and prototype tests have been done about the interpolating resistive readout structure with GEM (Gaseous Electron Multiplier) detector. From the simulation, we have a good knowledge of the process of charge diffusion on the surface of the readout plane and develop several reconstruction methods to determine the hit position. The total signal duration time of a typical event with the readout structure was about several hundred nanoseconds, which implied an ideal count rate up to 10⁶ Hz. A stable working prototype was designed and fabricated after the simulation. Using ⁵⁵Fe 5.9 keV X-ray, the image performance of the prototype was examined with flat field image and some special geometry shapes, meanwhile, an energy resolution of about 17% was obtained.     

Study of 2D interpolating readout for a micro-pattern gaseous detector

The two-dimensional interpolating readout, a new readout concept based on resistive anode structure, was studied for the micro-pattern gaseous detector. Within its high spatial resolution, the interpolating resistive readout structure leads to an enormous reduction of electronic channels compared with pure pixel devices, and also makes the detector more reliable and robust, which is attributed to its resistive anode relieving discharge. A GEM (gaseous electron multiplier) detector with 2D interpolating resistive readout structure was set up and the performance of the detector was studied with 55Fe 5.9 keV X-ray. The detector worked stably at the gain up to 3.5 × 104 without any discharge. An energy resolution of about 19%, and a spatial resolution of about 219 μm (FWHM) were reached, and good imaging performance was also obtained.     

TEXONO低能中微子实验中的CsI(T1)晶体探测器

TEXONO合作组首次采用CsI(T1)晶体测量反应堆中微子的能量、通量和反常磁矩,描述了实验的基本原理,探测器结构及其性能.     

电荷比较法测量液体闪烁体n,γ分辨性能

描述了一种采用CAMAC一微机系统采集数据,电荷比较法测量液体闪烁体的中子、γ射线分辨性能的新方法,同时测量了液体闪烁体NE213或BC519样品在²⁴¹Am–Be或²⁵²C_f中子源照射下的脉冲总电荷及多路不同时间段的部分电荷,对数据的离线分析给出闪烁体n,γ分辨与延迟时间及能量分布的关系,并可利用n,γ鉴别方法测量中子或γ射线的能量分布及闪烁体快或慢脉冲形状.     

Experimental study on the performance of a single-THGEM gas detector

A kind of thick GEM-like gaseous electron multiplier （THGEM）, which is mechanically an expansion of the GEM with its various dimensions being enlarged, is studied. The leak current of THGEM plates is measured. The effective gain and energy resolution of a single THGEM are studied with a source of 55Fe, and the effective gain of the single THGEM versus the electric field strength in the induction region is investigated. The results show that the leak current of THGEM plates is less than 200 pA. In an atmospheric-pressure standard gas mixture, 8×103 effective gain and about 32% energy resolution can be reached for the single-THGEM detector.     

BESⅢ-CsI(Tl)晶体量能器时间信息的研究

BESⅢ-CsI(Tl)晶体量能器采用FADC的DAQ电子学读出系统. 通过扫描信号幅度的分布寻找信号峰位. 为了降低扫描时间窗内(3μs)的低能本底计数、提高能量分辨和降低无效计数率, 除了传统的输出信号峰位(表征沉积能量)之外, 我们引出另一个较粗的时间信息, 即对应信号峰位的扫描步长数, 其步长精度为50ns. 本文将通过电子束流实验研究对这一时间信息的特点及如何利用时间信息进行详细的分析和讨论.     

CsI(Tl)晶体量能器中硅光二极管的核计数器效应研究

研究了由于电磁簇射在CsI(Tl)晶体后端的泄漏而引起的硅光二极管“核计数器”效应. 通过GEANT模拟和实验测量分析其在BESⅢ的CsI(Tl)晶体量能器中对能量测量的影响.     

BESⅢCsI晶体量能器设计中的优化

在BESⅢ晶体量能器的设计、研制过程中,对其性能进行蒙特卡罗研究,从而优化设计方案.     

闪烁光纤量能器单元模型的宇宙线测试

介绍闪烁光纤量能器单元模型宇宙线测试采用的简易实验装置和测量步骤,以及实验数据的分析处理方法.对来自意大利KLOE的铅–光纤量能器单元模型进行了宇宙线测试,对实验数据进行了分析和修正,给出了该单元模型的时间分辨(252ps)和位置分辨(4.1cm)等参数.