新型1,1-双二茂铁基丁烷衍生物的合成

1,1-双二茂铁基丁烷和乙酸酐经Friedel-Crafts酰基化反应得6-乙酰基-1,1-双二茂铁基丁烷(2);2经LiAlH4还原得6-α-羟乙基-1,1-双二茂铁基丁烷(3);3经消除反应合成了6-乙烯基-1,1-双二茂铁基丁烷(4)。2~4为新化合物,其结构经1H NMR,IR,MS和元素分析表征。     

纳米银的单颗粒-电感耦合等离子质谱法表征及其测定

建立单颗粒-电感耦合等离子体质谱法( SP-ICP-MS)测定稀溶液中纳米银颗粒粒度分布及纳米银颗粒数量浓度的方法。当停留时间为3 ms时,两个或多个纳米银颗粒同时进入检测器的可能性降至最低。采用5倍标准偏差迭代算法(5σ)区分纳米银颗粒信号和背景信号。采用SP-ICP-MS法测定3种商品级纳米银颗粒(30,50和100 nm)粒度分布和纳米颗粒浓度。结果表明：SP-ICP-MS法测定纳米银颗粒结果与纳米银的TEM值相近,可采用SP-ICP-MS法表征纳米银颗粒。本方法测定稀溶液中纳米银颗粒粒度检出限为25 nm,纳米银颗粒浓度检出限约为8×104个/L。将纳米银颗粒加入到自来水样品中并进行测定,获得相近的纳米银粒度分布及纳米颗粒浓度。本方法简单、快捷、灵敏度高,可为研究水环境中纳米银的风险评估提供可靠分析方法,并为饮用水中纳米银的监测提供分析技术。     

以一种新型Gemini表面活性剂作为介孔模板剂通过转晶过程合成介孔ZSM-5分子筛

将一种新型Gemini表面活性剂,丙撑基双(十八烷基二甲基氯化铵)[C18H37(CH3)2–N+–(CH2)3–N+–(CH3)2C18H37]Cl2(C18-3-18),作为介孔模板剂用于水热法合成介孔ZSM-5分子筛.结果表明,在130 oC低温晶化即可高效合成介孔ZSM-5分子刷.C18-3-18的加入量可影响到所合成介孔ZSM-5分子筛的相对结晶度和织构性质,它的形成遵从一个转晶过程.在合成初期,凝胶中介孔模板剂C18-3-18的使用导向了介孔材料的生成;随后在TPABr的模板作用下,介孔材料慢慢转晶生成具有MFI结构的介孔ZSM-5;然后所合成的介孔ZSM-5晶粒进一步长大并聚集形成块状颗粒,同时产生晶间介孔.C18-3-18作为介孔导向剂不仅可用于合成介孔ZSM-5分子筛,也可用于其它介孔分子筛的合成中.     

KCl对Cu-K-La/γ-Al2O3催化剂上HCl氧化反应性能的影响

采用等体积浸渍法制备了Cu-K-La/γ-Al₂O₃催化剂,考察了KCl对该催化剂催化HCl氧化制Cl₂反应性能的影响. 当KCl的负载量为5 wt%时,Cu-K-La/γ-Al₂O₃催化剂表现出较好的催化活性和稳定性,可在较大的原料气空速变化范围内使用. 在0.1 MPa,360 ℃,空速450 L/（kg-cat·h）和HCl/O₂摩尔比为2：1的反应条件下,Cu-K-La/γ-Al₂O₃催化剂上HCl转化率在100 h内保持85%以上. 表征结果表明,Cu,K和La物种均高度分散于γ-Al₂O₃载体表面;一定量KCl的加入可降低Cu²⁺ → Cu⁺的还原温度,从而提高Cu²⁺活性中心的催化活性.     

改性ZSM-5分子筛催化裂解湛江等鞭金藻制取低碳烯烃(英)

研究了湛江等鞭金藻(Isochrysis zhanjiangensis)在改性ZSM-5分子筛上催化裂解制取低碳烯烃的过程.与热裂解过程相比,湛江等鞭金藻催化裂解可以得到更高的低碳烯烃选择性和收率.同时还研究了湛江等鞭金藻中不同油脂和藻渣的催化裂解.结果表明,微藻中的油脂能有效转化为烯烃,其中中性脂的烯烃收率最高,可达36.7%.不同溶剂抽提后得到的藻渣也可转化为低碳烯烃,但收率远低于微藻中的油脂.微藻中的油脂,特别是中性脂,是烯烃的主要贡献者,提高微藻中的中性脂含量能够得到更高的低碳烯烃收率.     

Syntheses,Crystal Structures and Antibacterial Activities of Two Heterocyclic Schiff Base Compounds

Two heterocyclic Schiff bases were synthesized via the condensation reactions of primary amines with carbonyl compounds. 2-[(4-pyridylmethylene)-amino] phenol(compound 1) was synthesized by the interaction of 4-pyridinecarboxaldehyde with o-aminophenol in ethanol solvent; N,N‘-bis(3-(furan-2-yl)allylidene)benzene-1,4-diamin(compound 2) was synthesized by the interaction of 3-(2-furyl)acrolein with p-phenylenediamine in ethanol medium. The compounds were characterized by elemental analysis, IR, MS and single-crystal X-ray diffraction. Compound 1(C12H10N2O) crystallizes in the monoclinic system, space group P21/c with a = 7.0771(7), b = 7.2820(7), c = 19.849(2),β= 96.3390(10)°, V = 1016.66(17) ?3, Z = 4, Mr = 198.22, Dc = 1.295 g/cm3, F(000) = 416, GOOF = 1.060, μ= 0.085 mm-1, the final R = 0.0371 and wR = 0.0929 for 1497 observed reflections with I 2σ(I). Compound 2(C20H16N2O2) crystallizes in the orthorhombic system, space group Fdd2 with a = 26.344(15), b = 48.50(3), c = 5.293(3), V = 6764(7) ?3, Z = 16, Mr = 316.35, Dc = 1.243 g/cm3, F(000) = 2656, GOOF = 1.043, = 0.081 mm-1, the final R = 0.0526 and wR = 0.1267 for 2059 observed reflections with I 2σ(I). 1 and 2 molecules are connected through hydrogen bonds to generate a 2D network and a 1D chain structure, respectively. The preliminary antibacterial activity results showed that the title compounds display excellent antibacterial activities to Escherichia coli, Staphylococcus aureus and Bacillus subtilis.     

Hydrolytic Degradation Behaviors of Poly（p-dioxanone） in Ambient Environments

The effects of temperature and relative humidity on the hydrolytic degradation of poly（p-dioxanone）（PPDO） were investigated. The hydrolytic degradation behaviors were monitored by tracing the changes of water absorption, mechanical and crystalline properties, molecular weight and its distribution, surface morphologies, as well as infrared absorption peaks and hydrogen chemical shifts during the degradation. It is found that the water absorption increases whilst the intrinsic viscosity, tensile strength and elongation at break decrease as the temperature or relative humidity increases. With degradation time growing, the molecular weight drops and its distribution broadens. The crystallinity of PPDO has a tendency to increase at first and then to decrease, while the crystalline structure is not significantly changed. At the same time, some cracks are observed on the surface and keep growing and deepening. All results show that temperature plays more significant roles than relative humidity during the degradation. The analyses of Fourier transform infrared spectroscopy and hydrogen nuclear magnetic resonance spectroscopy reveal that the degradation of PPDO is a predominant hydrolysis of ester linkages.     

Rapid Isolation of a Facultative Anaerobic Electrochemically Active Bacterium Capable of Oxidizing Acetate for Electrogenesis and Azo Dyes Reduction

In this study, 27 strains of electrochemically active bacteria (EAB) were rapidly isolated and their capabilities of extracellular electron transfer were identified using a photometric method based on WO₃ nanoclusters. These strains caused color change of WO₃ from white to blue in a 24-well agar plate within 40 h. Most of the isolated EAB strains belonged to the genera of Aeromonas and Shewanella. One isolate, Pantoea agglomerans S5-44, was identified as an EAB that can utilize acetate as the carbon source to produce electricity and reduce azo dyes under anaerobic conditions. The results confirmed the capability of P. agglomerans S5-44 for extracellular electron transfer. The isolation of this acetate-utilizing, facultative EBA reveals the metabolic diversity of environmental bacteria. Such strains have great potential for environmental applications, especially at interfaces of aerobic and anaerobic environments, where acetate is the main available carbon source.     

Fabrication of free-standing multilayer films by using pH-responsive microgels as sacrificial layers

A facile way to prepare free-standing polyelectrolyte multilayer films of poly(sodium 4-styrenesulfonate)(PSS)/poly(diallyldimethylammonium)(PDDA) was developed by applying a new pH-dependent sacrificial system based on cross-linked poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) microgels. The tertiary amine groups of PDMAEMA microgels can be protonated in acidic environment, and the protonated microgels were deposited by layer-by-layer (LbL) technique with PSS. PSS/PDDA multilayer films were constructed on the top of the PSS/microgels sacrificial layers. The LbL assembly process was investigated by UV–vis spectroscopy. Further study shows that the free-standing PSS/PDDA multilayer films can be obtained within 3 min by treating the as-prepared films in alkali aqueous solution with a pH of 12.0. The pH-triggered exfoliation of PSS/PDDA multilayer films provides a simple and facile way to prepare LbL assembled free-standing multilayer films.     

Fabrication of anisotropic silica hollow microspheres using polymeric protrusion particles as templates

Anisotropic polystyrene/poly(styrene-co-divinylbenzene) (PS/P(S-DVB)) protrusion particles with various morphologies such as eyeball-like, snowman-like, and raspberry-like were synthesized using a modified seeded polymerization method by dynamically controlling and stabilizing the phase separation. The effects of swelling agent, crosslinker, and monomer concentrations on the particle morphologies were studied. Using the PS/P(S-DVB) protrusion particles as templates, anisotropic silica (SiO₂) hollow microspheres were fabricated facilely. The obtained anisotropic silica hollow spheres had a potential application in rapid waste removal and detoxification extraction with a very simple procedure.