有序自组装聚合物纳米结构

采用水辅助方法(water-assisted fabrication method),分别以4-十二烷基苯磺酸掺杂的聚苯胺(PANI-DBSA)和聚2-甲氧基-5-(2′-乙烯基-己氧基)苯乙炔(MEH-PPV)两种功能高聚物为成膜材料,冷凝水滴为模板,利用水滴在聚合物溶液表面的自组装,制备出了两种纳米层次以上的蜂窝状有序多孔聚合物薄膜.通过原子力显微镜和共聚焦荧光显微镜对其形貌、电学性质和荧光图像进行了表征.     

Self-assembly, optical behavior, and permeability of a novel capsule based on an azo dye and polyelectrolytes

A novel capsule composed of an azo dye, Congo red (CR), and different polymers, including poly(styrenesulfonate, sodium salt) (PSS), poly(allylamine hydrochloride) (PAH), and poly(diallyldimethylammonium chloride) (PDDA), have been successfully fabricated by the layer-by-layer self-assembly technique. The stepwise linear deposition process was monitored by means of UV-visible absorption measurements. The formation of hollow capsules was verified by confocal laser scanning microscopy (CLSM) and scanning force microscopy (SFM). The resulting hollow PSS/PAH/CR/PDDA capsules displayed a sensitive response to visible light. Optical changes of the hollow capsules prior to and after the photoreaction were investigated in detail by means of UV-visible spectroscopy, CLSM, and SFM. It was found that the photochemical reaction of the assembled hollow capsules depends strongly on the matrix. Qualitative results on the permeability of the hollow capsule walls with CR as one component indicate that the permeability of the walls can be easily photo-controlled at varying irradiation time intervals without addition of external chemicals.     

连续碳纤维增强的聚芳醚酮在Ⅰ型循环载荷下的层间破坏

 用双悬臂梁(DCB)试件研究了连续碳纤维增强的聚芳醚酮复合材料(CF/PEK-C),在Ⅰ型循环载荷作用下的层间裂纹扩展行为.循环载荷采用载荷控制模式,最小载荷与最大载荷之比为0.5.在疲劳试验中,仍然发现有“阻力曲线”现象存在.层间裂纹扩展速率用指数定律与相应的应变能释放速率联系起来,并对结果进行了讨论.     

Synthesis,crystal structure and magnetic properties of a series of polymeric lanthanoid–copper complexes [Ln2Cu3{O(CH2−CO2)2}6]·nH2O (Ln=La,Nd, n=9; Ln=Er,n=6)

The reaction of diglycolic acid, O(CH2CO2H)2, with Cu(NO3)2·2H2O and lanthanoid nitrate hydrate produces a series of novel Ln–Cu mixed metal complexes, [Ln2Cu3{O(CH2CO2)2}6]·nH2O (Ln=La, Nd, n=9; Ln=Er, n=6), which have been characterized by elemental analysis, i.r. spectroscopy, magnetic measurements and X-ray crystallography. The Ln3+ and Cu2+ ions are connected by the carboxylate groups of the ligands, resulting in the formation of a complicated network.     

结晶聚合物的辐射效应：多官能团单体对LDPE的结晶成核作用

根据x射线、电镜、DSC和凝胶分数的测试结果,讨论了多官能团单体结构对低密度聚乙烯聚集态结构的影响以及结晶度与辐射交联(或剂量)的关系。发现由于单体的存在导致低密度聚乙烯结晶度增加而结晶尺寸变小(即结晶成核效应);成核效应越大,增强辐射交联的效果也越大。添加具有高结晶成核作用的单体有利于低密度聚乙烯的辐射交联,同时也加速其结晶结构的破坏。     

Influence of extended π-conjugation units on carrier mobilities in conducting polymers

Carrier mobilities in thin films of copolymers with repeat units consisting of oligothiophenes bridged by Si atoms are measured over a range of doping levels, where the numbers of thienylenes in the repeat unit are 7, 8, 10, 12, and 14. The mobilities for these polymer films increased with the increase in doping level and the mobility enhancement followed an increasing order of the π-conjugation length. The magnitude of the mobility increase for the Si polymer comprising 14 thiophene units reached ca. 10⁴, implying that this π-conjugation length is almost sufficient to reproduce transport properties of polythiophenes.     

Synthesis and Characterization of 1,8-bis(ferrocenylmethyl)-5,5,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane, a Macrocyclic Ligand and its Complexes

A new diferrocenyl-substituted macrocyclic ligand (H₂L) and its complexes ML(M = Cu^II, Ni^II, Zn^II, Cd^II) were prepared and characterized by IR, elemental analysis, absorption spectra and FAB mass spectra. The ferrocenyl-substituted macrocyclic ligand was characterized by single crystal X-ray diffraction analysis. The superconjugative effect of the cyclopentadienyl (CP) rings increase the activity of the hydrogen atoms in the tetra-azacyclotetradecane macrocyclic ligand. The imine nitrogen atoms lose two protons and coordinate to the metal. The electrochemical properties of these compounds are discussed.     

Crystallization behavior and biodegradation of poly(3-hydroxybutyrate) and poly(ethylene glycol) multiblock copolymers

Block copolymerization by using isocyanates is an effective method for incorporating PHB and PEG because it can prepare copolymers with good properties, such as toughness, strength, and so on. In this study, we adopted soil suspension system to estimate the biodegradability of a series of PHB/PEG multiblock copolymers with different compositions and block lengths. In the degradation process, the changes in weight loss, molecular weight, and tensile strength were periodically measured to determine the biodegradability, and the surface morphology was also observed by SEM. In contrast to pure PHB, the weight loss of the copolymer was relatively lower. On the other hand, the tensile strength and molecular weight experienced apparent decrease, and for BHG1000-3-1, they reached 46.7% and 77.7% of the initial value, respectively. SEM observation showed that the surface was covered with numerous erosion pits. All these indicate that the degradation indeed took place and long-chain molecules have been hydrolyzed into shorter ones. The crystallization behavior was also investigated by DSC and WAXD. The results showed that both the segments, PEG and PHB, can form crystalline phases at lower PHB contents ranging from 29% to 44%, and when PHB component was more than 60%, only PHB phase can crystallize.     

ZrxTixAl1-2xO2的制备及其在三效催化剂上的应用

Zr_0.5Ti_0.5O₂(ZT) and Zr_0.25Ti_0.25Al_0.5O₂(ZTA) mixed oxides were prepared by co-precipitation method and characterized by low temperature adsorption-desorption， XRD and NH₃-TPD. The activity of Pt/Zr_0.5Ti_0.5O₂ and Pt/ Zr_0.5Ti_0.5Al_0.5O₂ catalysts was evaluated using the simulated gases. The results show that ZTA samples exhibit higher specific surface area， larger pore volume and proper surface acidic amount and acidity in comparison with ZT. The results of the catalytic test indicate that Pt/ZT and Pt/ZTA catalysts exhibit excellent low-temperature catalytic activity and lower light-off temperatures of hydrocarbon， carbon monoxide and nitrogen oxides， especially better conversion for nitrogen oxides (NO_x). The addition of Al₂O₃ into ZT enhanced the anti-aging property of Pt/ ZTA catalysts due to the excellent textural， structural， surface acidity and thermal stability.     

纳米镍-铁合金/膨胀石墨复合材料的制备、表征及其电磁屏蔽性能

The composites with nano-particles of Ni-Fe alloys dispersed on the nano-layers of expanded graphite (EG) were prepared by the impregnation of EG with ethanol solutions of nickel and iron acetates， followed by drying and reduction in H₂. The square nano-particles of Ni-Fe alloys with particle sizes of mainly 20～40 nm were found to be well spread on the layers of EG. The alloy nano-particles exhibited high shielding effectiveness (SE) for electromagnetic radiations at low frequencies due to their high magnetic conductivity. Since EG is electronically conductive and displayed high SE at high frequencies， the composites exhibited good SE at wide range of frequencies. The electric and magnetic conductivities of the composites could be monitored through regulating the loadings of alloy nano-particles on EG， and it was found that the composites with 20%～40% of the alloys exhibited good SE. Specifically， the composite 27%Ni-3%Fe-EG showed the excellent SE from 66 to 110 dB at the frequencies from 300 kHz to 1.5 GHz.