四种多变量校准方法在FTIR多组分分析中的性能比较

本文对四种多变量校准方法－－经典最小二乘法（CLS），偏最小二乘法（PLS），卡尔曼滤波法（KFM）以及人工神经网络法（ANN）－－在多组分浓度分析方面的性能进行了比较。选择五种红外谱图严重混叠的大气有机毒物－－1，3－丁二烯，苯，邻二甲苯，氯苯和丙烯醛－－作为分析对象。分别计算各种方法对该5组分体系的平均预测误差MPE和平均相对误差MRE进行比较。结果表明，偏最小二乘法在处理这类问题中是最稳健的方法。     

在白噪声分析中的广义维里拉普拉斯

一类广义维里拉普拉斯，把在白噪声分析构架中通常定义的维里拉普拉斯作为特殊情形而包含。     

Activity coefficients for NaBr in aqueous ternary solutions with sodium propionate and butyrate from EMF measurements

The activity coefficients of NaBr in the NaBr–NaPropionate–H₂O and NaBr–NaButyrate–H₂O systems were determined from EMF measurements at constant total ionic strength of 0.1 0.5 1.0 1.5 2.0 and 2.5 mol-kg^–1 and at 25° C. The activity coefficients were fitted using Scatchard, Pitzer and Lim equations. Finally the excess Gibbs free energy of these mixtures were also calculated.     

Dirichlet型空间上的乘子

本文主要根据τ与μ的不同取值分三种情况刻划了Cn中单位球上Dirichlet 型空间上的点乘子空间M(Dτ,Dμ),并通过两个函数的构造表明:当τ≤n时,包含 关系M(Dτ)(?)Dτ和当τ>μ,τ>n-1时,包含关系M(Dτ)(?) M(Dμ)是严格的.     

New families of exact solitary patterns solutions for the nonlinearly dispersive R(m,n) equations

The R(m,n) equations u_tt+a(uⁿ)_xx+b(u^m)_xxtt=0 (a, b const) are investigated by using some ansatze. As a result, new exact solitary patterns solutions and solitary wave solutions are obtained. These obtained solutions show that not only the nonlinearly dispersive R(m,m) equations (m≠1) but also the linearly dispersive R(1,n) equations (m=1) possess solitary patterns solutions, which has infinite slopes or cusps and solitary wave solutions.     

In situ observation of NaBi(WO4)2 dendrite growth and the study on microstructure of solidification

The dendrite growth process of transparent NaBi(WO4)2 with small prandtl and high melting point was studied by using the in-situ observation system. According to the dynamic images and detailed information, there are two kinds of restriction effect on the dendrite growth, the competition between arms and branches and the convection in the melt. The dendrite growth rate was time dependent, and the rate of arm growth reached the maximum 5.8 mm/s in the diffusive-advective region and rapidly decreased in the diffusive-convective region. The growth rate of branch had the same change trends as the arm's. Based on the EPMA-EDS data of solidification structure of quenched NaBi(WO4)2 melt, it was found that there were component differences from stoichiometric concentration in the melt near the interface during the growth process.     

17N+197Au反应中碎片与中子的符合测量

在3?3?.4MeV/u ¹⁷N束轰击¹⁹⁷Au靶产生的反应中,利用放置于不同角度组合的17个中子探测器(4°—83°)和14个半导体望远镜(2.3°—9.0°)对反应产物碎片与中子进行了符合测量.经对所得实验角分布积分得到Z=3—6元素的同位素产额分布.在参加者-旁观者模型框架下,采用¹⁷N原子核内部的不同密度分布计算了同位素产额分布并与实验数据做比较.     

局部可分度量空间闭s映象的注记

该文讨论局部可分度量空间闭s映象的分解定理, 证明了正则的Fréchet空间是局部可分度量空间的闭s映象当且仅当满足如下条件: 具有点可数的cs*网, 第一可数的闭子空间是局部可分的, 且Lindelof的闭子空间是可分的.     

石墨-六角氮化硼微晶混合物与水高压反应产物分析

 利用球磨法制备石墨-六角氮化硼微晶混合物，并在6.1 GPa、800~1 500 ℃条件下与水进行高压反应，以便研究用水作触媒合成B-C-N三元化合物的可能性。通过对反应产物的XRD、XPS谱分析发现：高压下随着温度的升高，反应产物中出现再结晶石墨，其晶化程度逐渐提高；但没有出现再结晶六角氮化硼，也未出现立方氮化硼。在球磨不充分条件下，石墨-六角氮化硼混合物的XRD谱没有完全弥散，它们与水高压反应时，能观察到石墨与立方氮化硼分别结晶的现象，但都没有形成B-C-N晶化结构。     

2‐Cyanoprop‐2‐yl dithiobenzoate mediated reversible addition–fragmentation chain transfer polymerization of acrylonitrile targeting a polymer with a higher molecular weight

The reversible addition–fragmentation chain transfer (RAFT) polymerization of acrylonitrile (AN) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was first applied to synthesize polyacrylonitrile (PAN) with a high molecular weight up to 32,800 and a polydispersity index as low as 1.29. The key to success was ascribed to the optimization of the experimental conditions to increase the fragmentation reaction efficiency of the intermediate radical. In accordance with the atom transfer radical polymerization of AN, ethylene carbonate was also a better solvent candidate for providing higher controlled/living RAFT polymerization behaviors than dimethylformamide and dimethyl sulfoxide. The various experimental parameters, including the temperature, the molar ratio of dithiobenzoate to the initiator, the molar ratio of the monomer to dithiobenzoate, the monomer concentration, and the addition of the comonomer, were varied to improve the control of the molecular weight and polydispersity index. The molecular weights of PANs were validated by gel permeation chromatography along with a universal calibration procedure and intrinsic viscosity measurements. ¹H NMR analysis confirmed the high chain‐end functionality of the resultant polymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1272–1281, 2007