In-time motion adjustment in laser cladding manufacturing process for improving dimensional accuracy and surface finish of the formed part

This paper presents in-time motion adjustment in laser cladding manufacturing process as a means to improve dimensional accuracy and surface finish of the built part. Defects occurring during laser cladding degrade the part quality such as dimensional accuracy and surface finish. In this paper, in-time motion adjustment strategy was presented to remedy and eliminate defects occurring during laser cladding to improve the dimensional accuracy and surface finish. Based on the relationship between the motion of laser head relative to the growing part and other parameters in effects on clad profile, the laser traverse speed, stand-off distance and laser approach orientation to the existing clad layer were adjusted by instructions from a close-loop control system in real time to remedy and eliminate defects. The results of the experiments verified the effects of in-time motion adjustment on dimensional accuracy and surface finish.     

164Lu的三轴超形变核态的研究

利用TRS方法对双奇核¹⁶⁴Lu的位能面进行了计算,确认了¹⁶⁴Lu核的一条三轴超形变带,结果与实验较好地符合,同时指出了三轴超形变带的一个具体的组态     

Fe2O3纳米微粒溶胶非线性光学特性的Z-扫描研究

利用Z扫描技术在透明区域研究了Fe₂O₃纳米微粒水溶胶和表面包覆有机溶胶的非线性光学特性，给出了非线性折射率γ、双光子吸收系数β、自由载流子折射系数σ_r和自由载流子吸收截面σ_ab等重要物理参数，讨论了自由载流子效应对Fe₂O₃纳米微粒非线性特性的影响 关键词：     

花丝内插物强化竖直管内凝结换热的实验研究

1前言大空隙率多孔体管内插物-绕花丝内插物，被认为是强化管内凝结换热的最有效途径之一[1]．但以往的研究，由于实验雷诺数范围较小，蒸汽速度较低，要正确全面评价其性能尚显不够。本文在原有工作的基础上，进一步完善了实验系统，改进了测试手段，扩大了实验雷诺数范围，并测试了其阻力性能，对花丝内插物强化管内凝结换热进行了较深入全面的实验研究，以全面评价花丝内插物对管内凝结换热的强化效果。2实验系统本文实验系统如图1所示。实验段是一个竖直套管冷凝器，如图2所示．本试验研究蒸汽完全凝结时的传热。凝结水流量采用容积法计…     

多复变数的Schwarz导数(IV)

从2个不同的Lie群出发 ,定义与讨论了2种互不等价的Cⁿ中域上的全纯映照的Schwarz导数，给出了这2种Schwarz导数为零的充要条件 .     

脂肪乳剂Intralipid代谢产物的高效液相色谱测定

本文介绍了利用ＨＰＬＣ色谱柱前衍生化技术简便，正确和灵敏地测定血清中游离脂肪酸的方法。在最佳条件下，一些脂肪酸的最低检知量为０．０４μｇ。方法已用于脂肪乳剂Ｉｎｔｒａｌｉｐｉｄ在诱发急性坏死性胰腺炎动物体内代谢产物测定。     

(ΩΩ)0+ Dibaryon Productions in Central Au+Au Collisions at RHIC Energy(SNN)= 130 GeV

Based on the measured transverse mass spectra ofπr-, K-, and p at the RHIC energy s()NN = 130 GeV,di-omega productions from baryon-baryon reactions in hadronic matter are studied. Results about the (ΩΩ)0+ numbershow that the deeply bound state (ΩΩ)o+ can be observed at RHIC energies.     

用Josephson结电子模拟器测量磁通量子2e/h

介绍用Josephson结电子模拟器在政党温度下，模拟测量磁通量子2e/h，用模拟器来研究Josephosn结的特性。该实验可作为普通物理实验中课题设计实验的一个内容。     

金属有机化学气相沉积法制备钛酸铅铁电薄膜

利用低压ＭＯＣＶＤ工艺分别在（００１）取向的ＬａＡｌＯ_３，ＳｒＴｉＯ_３和重掺杂硅单晶衬底上制备ＰｂＴｉＯ_３铁电薄膜，并通过Ｘ射线衍射谱对薄膜的微结构进行分析．Ｘ射线θ－２θ扫描显示硅衬底上得到了ＰｂＴｉＯ_３多晶薄膜，另两种衬底上得到了择优取向的ＰｂＴｉＯ_３薄膜．ＬａＡｌＯ_３衬底上的ＰｂＴｉＯ_３薄膜有ａ和ｃ两个取向，也就是薄膜中存在着９０°畴结构，而生长在ＳｒＴｉＯ_３衬底上的ＰｂＴｉＯ_３薄膜中只存在ｃ方向的择优取向．由于薄膜的尺度效应，发现ｃ轴晶格常数与块材相比均缩短．Ｘ射线的φ扫描验证了后两类薄膜的外延特性，利用同步辐射的高强度和高能量分辨率用摇摆曲线方法研究了这两种外延薄膜的品质，进一步证明了ＳｒＴｉＯ_３衬底上的ＰｂＴｉＯ_３薄膜的单畴特性．利用重掺杂的硅衬底作底电极，测量显示直接生长于硅衬底上的ＰｂＴｉＯ_３多晶薄膜具有良好的铁电性能 关键词：     

Outline Imaging by THz Time Domain Spectroscopy

Outline imaging by THz time domain spectroscopy is proposed. Spectroscopic splitting at interface is reported, The principle of outline imaging is put forward. Experimental results demonstrate the feasibility of outline imaging by spectroscopic splitting, It is shown that clear out：line image of sample interface could be achieved easily by this technique. The spatial resolution is about 0.6mm. The THz-beam focus, the scanning step and the THz pulse width are the critical foctors affecting the imaging resolution. The signal-to-noise ratio of this technique could be improved greatly compared to the conventional transsion imaging.