Indirect automatic atomic absorption determination of sulphate based on its precipitation with barium

A continuous precipitation flame atomization atomic absorption spectrometric method for the indirect determination of sulphate is proposed. By using a reversed flow-injection configuration for precipitation as barium sulphate, this anion was determined in the range 10–150 g/ml, with a relative standard deviation of 2.6%. The sensitivity was increased by a factor of seven by using a nitrous oxide-acetylene flame to measure barium.     

钢都酒的香味成分分析

通过对钢都酒进行化学处理,分类收集组分,采用GC-MS联用技术对各组分进行分离与定性定量测定,分离并鉴定出35个化合物,并确定了酒的香型。     

离子色谱法同时测定降水中的9种阴离子

本文建立了离子色谱法同时测定雨水及雪水中9种阴离子的新方法,通过对分析条件的优化,确定了最佳的色谱条件。研究结果表明:以9.0 mmol/L Na2CO3为流动相,流速1.5 mL/min,9种阴离子在15 min内实现基线分离并完成电导检测。9种阴离子的检出限在0.008~0.087μg/mL之间,线性范围达2个数量级以上,平均加标回收率在91.6%~110.3%之间,相对标准偏差均小于5%。该方法用于雨水及雪水样品的分析,结果令人满意。     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

一种用于空气中二氧化碳现场测定的新方法

一种用于空气中二氧化碳现场测定的新方法于爱民，杨广德，王锐，金钦汉（吉林大学化学系，长春１３００２３）关键词微波诱导等离子体，离子化检测器，气相色谱仪，二氧化碳二氧化碳在植物生长代谢及其生态平衡过程中起着重要作用，现场测定二氧化碳是目前农业、环境科学...     

Hydride generation atomic fluorescence spectrometric determination of ultratraces of selenium and tellurium in cow milk

A sensitive procedure has been developed for selenium and tellurium determination in milk by hydride generation atomic fluorescence spectrometry (HG-AFS) after microwave-assisted sample digestion. The method provides sensitivity values of 1591 and 997 fluorescence units ng⁻¹ ml⁻¹ with detection limits of 0.005 and 0.015 ng ml⁻¹ for Se and Te, respectively. The application of the developed methodology to the analysis of cow milk samples of the Spanish market evidenced the presence of concentration ranges from 11.1 to 26.0 ng ml⁻¹ for Se, and from 1.04 to 9.7 ng ml⁻¹ for Te having found a good comparability with data obtained after dry-ashing of samples.     

Attenuated Total Reflection-Fourier transform infrared analysis of the fermentation process of pineapple

A direct and reagent free procedure has been developed to monitor the fermentation process of pine apple nectar using Attenuated Total Reflectance Fourier-transform mid-infrared spectrometry (FT-IR) and multivariate analysis. A classical 4² design for standards was employed for calibration using the information in the spectral range from 907 to 1531 cm⁻¹ of the first order derivative spectra after mean centering of infrared data. The root mean square error of calibration (RMSEC) of 0.040, 0.021, 0.063 and 0.074% w/w were obtained for glucose, fructose, saccharose and ethanol, respectively, and a mean relative validation error of 2.9, 2.1, 2.6 and 3.6% was achieved for glucose, fructose, saccharose and ethanol. Results obtained by the proposed procedure for the alcohol content at different fermentation levels were statistically comparable with those obtained by a reference spectrometric method. So, FT-IR spectrometry provides a fast alternative to long and tedious classical procedures to ethanol determination and sugar enzymatic analysis.     

A vacuum ultraviolet photoionization mass spectrometric study of acetone

The photoionization and dissociative photoionization of acetone have been studied at the photon energy range of 8-20 eV. Photoionization efficiency spectra for ions CH3COCH3+, CH3+, C2H3+, C3H3+, C3H5+, CH(2-)CO+, CH3CO+, C3H4O+, and CH3COCH2+ have been measured. In addition, the energetics of the dissociative photoionization has been examined by ab initio Gaussian-3 (G3) calculations. The computational results are useful in establishing the dissociation channels near the ionization thresholds. With the help of G3 results, the dissociation channels for the formation of the fragment ions CH3CO+, CH2CO+, CH3+, C3H3+, and CH3COCH2+ have been established. The G3 results are in fair to excellent agreement with the experimental data.     

水热法合成Ce0.67Zr0.33O0.2固溶体研究

采用两种不同前驱体通过水热法合成了Ce0.67Zr0.33O0.2固溶体,并通过XRD,BET,TPR等手段考察了样品的相结构,比表面及还原特性.结果表明,在180℃,12 h的水热条件下,以共沉淀产物为前驱体所制得的Ce0.67Zr0.33O0.2固溶体比表面积较高,但存在一定程度的相分离;以凝胶产物为前驱体制得的Ce0.67Zr0.33O0.2固溶体结构更完整,具有良好的还原特性及热稳定性.